Bike Decal

Posts: 1
Joined: Tue Dec 05, 2017 8:11 pm

Bike Decal

Postby jmart2535 » Tue Dec 05, 2017 8:18 pm

I am trying to restore a Bennett Sportster. Unfortunately the stickers are in terrible condition and I am struggling to find replacements. Does anyone have any suggestions?

User avatar
Derny Driver
Posts: 2428
Joined: Wed Nov 21, 2012 12:18 pm
Location: Wollongong

Re: Bike Decal

Postby Derny Driver » Tue Dec 05, 2017 10:24 pm

Yes. Google "Cyclomondo"
Greg Softley is your man.
If he doesnt have the stickers in stock he can make them.
He's also on Ebay under Cyclomondo.
Absolutely the best in the business used by all the guys who restore bicycles.

User avatar
Posts: 1401
Joined: Sat Feb 11, 2017 7:38 pm
Location: Melbourne, in the suburbs, near some hills

Re: Bike Decal

Postby 10speedsemiracer » Tue Dec 05, 2017 11:28 pm

+1 for Greg at Cyclomondo, exactly what DernyDriver said, and is easily the best. Link to his contact details below, and have no hesitation in recommending him.
Mmm, SunTour

User avatar
Posts: 8
Joined: Sun Nov 12, 2017 11:14 am
Location: Rosebud, Mornington Peninsula, Victoria, Australia

Re: Bike Decal

Postby euphi223 » Mon Dec 11, 2017 3:11 pm

The Best way ive found to remove decals is a rubber compound disc that can go in a drill or grinder. Obviously you first need to get through the top clear coat layer. I havent seen your frame so i dont know how thick it is. Use a VERY fine grit sand paper! The disc will spin at a high rate and heat up the decal/sticker (wot eva). it will become malleable and you'll be able to remove it.
You'll need to re-seal the frame after the new sticker goes on.

Who is online

Users browsing this forum: uart