Individual and Team TT
13 posts • Page 1 of 1
Can't comment on the above brand.
But in general
Effective? Yes http://www.wheelbuilder.com/aerodisc-data.html
Legal for TT? Not UCI events (all TTs requiring a Cycling Australia licence including club races)
1.3.024 Any device, added or blended into the structure, that is destined to decrease, or which has the effect
of decreasing, resistance to air penetration or artificially to accelerate propulsion, such as a protective
screen, fuselage form fairing or the like, shall be prohibited.
Unless there has been a change more recently that I am not aware of?
HED discs get away with it as the cover is bonded so deemed structural.
A work colleage of mine used one in Ironman Australia a few months ago. It's one of the Wheelbuilder Aero Jacket covers and he says it works very well
It doesn't make the unique sound of a true disc wheel however...so no intimidation factor
I have a Wheelbuilder cover on my 404 Zipp and use it for club TTs where they aren't concerned with silly UCI rules. It's just as aero as a "proper" disc and considerably lighter, so the best of both worlds.
When I first installed the cover I was really dissapointed with the fit. I couldn't get it smooth or flat, it was all lumpy where the fastening screws held it onto the wheel. So I took the wheel off and bought a proper disc and used that for a while and then one day pulled the original covered wheel out of storage and found the cover had somehow sorted itself out and was now smooth.
No issue with legality in any triathlons, because they're not governed by UCI rules.
I had a thought, but it got run over as it crossed my mind.
Yes, I rode wheel covers at UCI World Cup road TT and in other championships with full scrutineering. Heck I had to have a helmet the right colour (true!).
That doesn't mean every one every time will be permitted to. Just as likely to show up with a different group of commissaires and be ask to remove it. The "make your own" thing is likely to be more of an issue from a structural/safety POV.
If fitted properly they are pretty well indistiguishable from a disk. One could interpret the rule differently, and as dalai said a strict interpretation is they are not permitted. Really it's up to the commissaires and if they see no reason not to consider it a legal disk wheel I doubt you'll run into trouble. They are mostly concerned with the bars and saddle placement, if they have enough to perform the scrutineering at all. Still, I'd have a spare wheel just in case
If for your local TTs or triathlons, then per $ they are one of the best equipment based aero improvements available.
That link goes to a 404, this is the one you want http://www.wheelbuilder.com/aerodisc-data.html .
VERY interesting stuff.
When man invented the bicycle he reached the peak of his attainments- Elizabeth West.
They didn't scrutineer bikes at the NSW Masters ITT this year. They did scrutineer the bikes and helmets at the Australian ITT last year.
The rules are designed to prevent you adding an aerodynamic aid, which is what a cover gives you. Where a disk wheel is an integral part of the structure.
Fixie riders never freewheel
Been using a Disc Cover on my Zipp 808 Tubular for a couple of years now but when you can pick up a FloDisc for $599USD+shipping, I'm going to turf the cover get the full Disc goodness.
13 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users