Vivente Randonneur

User avatar
RonK
Posts: 11508
Joined: Mon Aug 24, 2009 2:08 pm
Location: If you need to know, ask me
Contact:

Re: Vivente Randonneur

Postby RonK » Sat Mar 09, 2013 10:28 am

Regardless of the component upgrades, he's asking for near the RRP of the current model VWR for a two year old bike. Good luck with that.
Cycle touring blog and tour journals: whispering wheels...

LateStarter
Posts: 379
Joined: Tue Dec 20, 2011 12:10 pm
Location: On the saddle (mostly in nsw)

Re: Vivente Randonneur

Postby LateStarter » Tue Mar 12, 2013 2:16 pm

G'Day everyone, I have been a long time watcher here and a long time admirer of the Vivente World Randonneur and have finally got one of my own.

I have used a 2008 Cannondale Touring 2 for a while and enjoyed short touring but I have never really been comfortable on it and have wished for better brakes & lighting. I don’t know why I have waited so long, the Vivente seems like it was custom built just for me, fits like glove, rides like a dream, while I have only done 100 km so far, including 75km “ride” home the long way from shop (Glowworm, Marrickville NSW), I have not yet found anything that is not near perfect.

Thanks for all the encouragement, looking forward to some great rides. It is one of the 2013 models and the spec changes seem to have been influenced by discussions on this site.

Image
Vivente World Randonneur by LateStarter52, on Flickr

User avatar
Sprocket
Posts: 155
Joined: Tue Oct 09, 2012 9:07 am
Location: Perth, WA

Re: Vivente Randonneur

Postby Sprocket » Tue Mar 12, 2013 5:09 pm

Welcome to the wonderful world of the VWR! I love mine. If I was forced to choose only one bike to keep (because like all velominati rule followers I have more than 2 :) ) it would be the VWR!

The 2013 model looks like it has some good improvements. Happy cycling!

User avatar
outnabike
Posts: 2455
Joined: Tue Jan 08, 2013 2:53 pm
Location: Melbourne Vic

Re: Vivente Randonneur

Postby outnabike » Tue Mar 12, 2013 5:24 pm

Nice bike LateStarter, you will get a lot of pleasure, I'm sure.
I finished up removing the centre stand and bought a side activating one that fits in the same place. Sounds silly but my bike fell over twice off the centre stand due to overbalancing.
I was tempted to cut the stand down, but that makes the base even narrower than existing. This won't suit every one but works for me.
Mind you it is probably due to the gear I carry, but the point of balance was pretty fine. All ok now though even packed up.
Vivente World Randonneur complete with panniers

User avatar
Tim
Posts: 2944
Joined: Wed Jul 07, 2010 5:02 pm
Location: Gippsland Lakes

Re: Vivente Randonneur

Postby Tim » Wed Mar 13, 2013 11:45 am

Sprocket wrote:If I was forced to choose only one bike to keep (because like all velominati rule followers I have more than 2 :) ) it would be the VWR!
My thoughts too.
The new model looks very nice. I much prefer the more subdued top tube logo and paintwork on the 2013 compared to mine.
Congratulations on a smart bike choice. They might be a bit heavy but they are vastly more comfortable than any carbon or aluminium bike I've ever owned. Durable, reliable, versatile, excellent value for money. What more could anyone want?
Its good to know Noel listens and responds to customer input. He's giving us what we want not what he thinks we need.
Is that seat angle comfortable for you? I tilt mine back in the opposite direction.

User avatar
elStado
Posts: 2363
Joined: Tue Mar 16, 2010 12:27 am
Location: Syd, NSW

Re: Vivente Randonneur

Postby elStado » Thu Mar 14, 2013 12:54 am

LateStarter wrote:Thanks for all the encouragement, looking forward to some great rides. It is one of the 2013 models and the spec changes seem to have been influenced by discussions on this site.
Noel is very much aware that to keep this bike a favourite within this niche it needs to constantly be improved and tweaked based on customer feedback, his own personal experiences and market developments.

I reckon he's doing a good job too! I've sent him plenty of questions and comments over the past year and he's always open to suggestions or feedback.

My website has probably resulted in the sale of a few dozen VWRs since I put my review up last year, I've received a number of emails and comments from people who bought it after reading my website. Pretty happy to support a local company that does it's bets to provide a high quality product. IMO it's the best designed and best value off-the-shelf touring/commuting bike you can buy in the world. If I could have only one bike, it would be the VWR too.
Check out my practical cycling and cycle touring website: VELOPHILE AUSTRALIA

LateStarter
Posts: 379
Joined: Tue Dec 20, 2011 12:10 pm
Location: On the saddle (mostly in nsw)

Re: Vivente Randonneur

Postby LateStarter » Thu Mar 14, 2013 3:08 pm

outnabike wrote: I finished up removing the centre stand and bought a side activating one that fits in the same place.
The 2013 have a "MassLoad" stand on all models rather than the Pletscher of some 2012 models. I don't know if it is better for your heavy loaded purposes but it seems very stable, is height adjustable without cutting, the legs spread a reasonable distance and have little feet that point out to give it even more stability.

And I agree Tim & elStado , the VWR seems like a very good all round bike for me anyway as I don't intend to race anywhere.
Last edited by LateStarter on Thu Mar 14, 2013 3:41 pm, edited 3 times in total.
Bill (Long Distance Dreamer)
2008 Cannondale Touring 2, 2013 Vivente World Randonneur, 2015 Lynskey Sportive Disc

LateStarter
Posts: 379
Joined: Tue Dec 20, 2011 12:10 pm
Location: On the saddle (mostly in nsw)

Re: Vivente Randonneur

Postby LateStarter » Thu Mar 14, 2013 3:32 pm

Tim wrote:Is that seat angle comfortable for you? I tilt mine back in the opposite direction.
Ah a little embarrassed by that. At the shop I adjusted for height and jumped on a rode the "long" way home (75kms, bit over three hours) and kept thinking how comfortable the seat was along with all the other positive thoughts about the new bike. Got home, took some photos and looking at them was surprised at the seat angle as I usually try to have them level.

I had a look at the seat retention clamp and could not figure how to adjust the angle. The bottom part of the clamp has a semi circular rocker type bit (facing down) with ridges that sits in a corresponding semi circular (facing up) part of the seat post, these should allow the angle of the seat rails to be adjusted with the clamp bolt loosened BUT I can't move it, the two semi circular bits seem frozen together ? I have not yet given them a gentle tap with a small hammer to see if that separates them, are the previous models like this?

I had bought a SMP TRK saddle a month or so ago for the Cannondale and I put it on as it has a slight up tilt to neutralise the clamp down tilt. I did a 100 km ride but did not feel as comfortable as the standard VWR saddle (but still much more comfortable than old Cannondale saddle).

Anyway I will have a look again on weekend to see if I can figure out the clamp.

Image
Seatpost by LateStarter52, on Flickr
Bill (Long Distance Dreamer)
2008 Cannondale Touring 2, 2013 Vivente World Randonneur, 2015 Lynskey Sportive Disc

User avatar
outnabike
Posts: 2455
Joined: Tue Jan 08, 2013 2:53 pm
Location: Melbourne Vic

Re: Vivente Randonneur

Postby outnabike » Thu Mar 14, 2013 5:33 pm

LateStarter wrote:
Tim wrote:Is that seat angle comfortable for you? I tilt mine back in the opposite direction.
Ah a little embarrassed by that. At the shop I adjusted for height and jumped on a rode the "long" way home (75kms, bit over three hours) and kept thinking how comfortable the seat was along with all the other positive thoughts about the new bike. Got home, took some photos and looking at them was surprised at the seat angle as I usually try to have them level.

I had a look at the seat retention clamp and could not figure how to adjust the angle. The bottom part of the clamp has a semi circular rocker type bit (facing down) with ridges that sits in a corresponding semi circular (facing up) part of the seat post, these should allow the angle of the seat rails to be adjusted with the clamp bolt loosened BUT I can't move it, the two semi circular bits seem frozen together ? I have not yet given them a gentle tap with a small hammer to see if that separates them, are the previous models like this?

I had bought a SMP TRK saddle a month or so ago for the Cannondale and I put it on as it has a slight up tilt to neutralise the clamp down tilt. I did a 100 km ride but did not feel as comfortable as the standard VWR saddle (but still much more comfortable than old Cannondale saddle).

Anyway I will have a look again on weekend to see if I can figure out the clamp.

Image
Seatpost by LateStarter52, on Flickr
You will have to undo the allen bolt loose enough to do the adjustment . If you look right up close, there is a rocker plate with serrations to give different level positions. Not a problem with a bit of trial and error.
Takes 3 min.
Vivente World Randonneur complete with panniers

iacl
Posts: 59
Joined: Tue Dec 28, 2010 2:36 pm
Location: out and about somewhere

Re: Vivente Randonneur

Postby iacl » Thu Mar 21, 2013 8:28 am

LateStarter wrote:G'Day everyone, I have been a long time watcher here and a long time admirer of the Vivente World Randonneur and have finally got one of my own.

I have used a 2008 Cannondale Touring 2 for a while and enjoyed short touring but I have never really been comfortable on it and have wished for better brakes & lighting. I don’t know why I have waited so long, the Vivente seems like it was custom built just for me, fits like glove, rides like a dream, while I have only done 100 km so far, including 75km “ride” home the long way from shop (Glowworm, Marrickville NSW), I have not yet found anything that is not near perfect.

Thanks for all the encouragement, looking forward to some great rides. It is one of the 2013 models and the spec changes seem to have been influenced by discussions on this site.
Hard not to be happy, it's a great bike. And seems to be getting more so. Really like the more understated look of the decal on the top tube. I rode my 2012 model home from Newtown to Wollongong when I picked it up, it also felt pretty much right from the start.

I've just fitted one of the newer humpert horn bars, really nice in use. Also put one on the audax bike.

iacl
Posts: 59
Joined: Tue Dec 28, 2010 2:36 pm
Location: out and about somewhere

Re: Vivente Randonneur

Postby iacl » Thu Mar 21, 2013 8:40 am

Have been a bit curious about the extra eyelets on the front right side of the tube, and near the top front of the forks near the crown. Does anybody know what these are for? (2012 frame).

Thanks.

User avatar
outnabike
Posts: 2455
Joined: Tue Jan 08, 2013 2:53 pm
Location: Melbourne Vic

Re: Vivente Randonneur

Postby outnabike » Thu Mar 21, 2013 4:36 pm

iacl wrote:Have been a bit curious about the extra eyelets on the front right side of the tube, and near the top front of the forks near the crown. Does anybody know what these are for? (2012 frame).

Thanks.
Could you be referring to the front rack fixing points?

iacl
Posts: 59
Joined: Tue Dec 28, 2010 2:36 pm
Location: out and about somewhere

Re: Vivente Randonneur

Postby iacl » Thu Mar 21, 2013 5:07 pm

outnabike wrote:
iacl wrote:Have been a bit curious about the extra eyelets on the front right side of the tube, and near the top front of the forks near the crown. Does anybody know what these are for? (2012 frame).

Thanks.
Could you be referring to the front rack fixing points?
No, they are above the brake bosses, and front not side facing. In my case they sit behind the front V brakes.

User avatar
RonK
Posts: 11508
Joined: Mon Aug 24, 2009 2:08 pm
Location: If you need to know, ask me
Contact:

Re: Vivente Randonneur

Postby RonK » Thu Mar 21, 2013 7:41 pm

iacl wrote:
outnabike wrote:
iacl wrote:Have been a bit curious about the extra eyelets on the front right side of the tube, and near the top front of the forks near the crown. Does anybody know what these are for? (2012 frame).

Thanks.
Could you be referring to the front rack fixing points?
No, they are above the brake bosses, and front not side facing. In my case they sit behind the front V brakes.
Possibly for mounting a randonneur type rack something like this one.
Image

iacl
Posts: 59
Joined: Tue Dec 28, 2010 2:36 pm
Location: out and about somewhere

Re: Vivente Randonneur

Postby iacl » Sat Mar 23, 2013 9:16 am

Hi RonK, no I don't think so. They are well above the brakes bosses, near the crown.

User avatar
rifraf
Posts: 3843
Joined: Fri Apr 15, 2011 5:55 pm
Location: Two Rocks, WA

Re: Vivente Randonneur

Postby rifraf » Sat Mar 23, 2013 3:06 pm

iacl wrote:Hi RonK, no I don't think so. They are well above the brakes bosses, near the crown.
Looking forward to your pics to put us out of our misery :D

User avatar
outnabike
Posts: 2455
Joined: Tue Jan 08, 2013 2:53 pm
Location: Melbourne Vic

Re: Vivente Randonneur

Postby outnabike » Sat Mar 23, 2013 5:55 pm

iacl wrote:
outnabike wrote:
iacl wrote:Have been a bit curious about the extra eyelets on the front right side of the tube, and near the top front of the forks near the crown. Does anybody know what these are for? (2012 frame).

Thanks.
Could you be referring to the front rack fixing points?
No, they are above the brake bosses, and front not side facing. In my case they sit behind the front V brakes.
Has your bike a front v Brake? Mine is 2012 and has a front disk brake.It is possible in an emergency to remove the rear brake and front mount it. My bike came with a spare part to facilitate this move.
Neal told me that in all his cycling he had never needed to do this though.

iacl
Posts: 59
Joined: Tue Dec 28, 2010 2:36 pm
Location: out and about somewhere

Re: Vivente Randonneur

Postby iacl » Sat Mar 23, 2013 6:23 pm

Actually I'm running V brakes front and rear on my bike.

The eyelets I'm asking about are well above the brake boses.

Sent from my GT-N7000 using Tapatalk 2

User avatar
Sprocket
Posts: 155
Joined: Tue Oct 09, 2012 9:07 am
Location: Perth, WA

Re: Vivente Randonneur

Postby Sprocket » Fri Apr 12, 2013 5:06 pm

iacl wrote:Have been a bit curious about the extra eyelets on the front right side of the tube
I was curious about this one too and some time back asked Noel.
Noel from VWR wrote:Many years ago people started mounting big Indian style bells there and we never stopped having the mounting point. We finally did remove it in the 2013 frames.
iacl wrote:and near the top front of the forks near the crown. Does anybody know what these are for?
And I have no idea for these and haven't asked. I keep meaning to take a photograph as per rifraf's request but my bike's too dirty :oops:

baghwan
Posts: 37
Joined: Mon Nov 07, 2011 11:05 am

Re: Vivente Randonneur

Postby baghwan » Wed Aug 28, 2013 5:12 am

Was a bit bad and kept procrastinating replacing my front disk pads, 5000km with a lot of heavy breaking though mountains, they were down to the steel, guy at the bike store was impressed. What else should I be looking at replacing? Can the chain typically take another 3000km till I finish and get back home?

User avatar
clackers
Posts: 2065
Joined: Mon May 16, 2011 10:48 am
Location: Melbourne

Re: Vivente Randonneur

Postby clackers » Wed Aug 28, 2013 4:49 pm

baghwan wrote:Was a bit bad and kept procrastinating replacing my front disk pads, 5000km with a lot of heavy breaking though mountains, they were down to the steel, guy at the bike store was impressed. What else should I be looking at replacing? Can the chain typically take another 3000km till I finish and get back home?
Nothing wrong with replacing a chain after 5000.

Why not do it now while you've got a supplier and mechanic instead of it letting you down when you're out of the saddle climbing another mountain?

User avatar
RonK
Posts: 11508
Joined: Mon Aug 24, 2009 2:08 pm
Location: If you need to know, ask me
Contact:

Re: Vivente Randonneur

Postby RonK » Wed Aug 28, 2013 5:20 pm

clackers wrote:Nothing wrong with replacing a chain after 5000.

Why not do it now while you've got a supplier and mechanic instead of it letting you down when you're out of the saddle climbing another mountain?
Quite right - if I was planning a longish tour I'd be replacing the chain and maybe the cassette before I left.
Cycle touring blog and tour journals: whispering wheels...

baghwan
Posts: 37
Joined: Mon Nov 07, 2011 11:05 am

Re: Vivente Randonneur

Postby baghwan » Thu Aug 29, 2013 8:24 am

My mountains are done, am doing the homeward stretch from Paris to Copenhagen, mostly flat.

On another note the bike(2012 Bar-end) has preformed flawlessly, have thrown every grade of terrain at it, barely done any maintenance, not even a flat tire or broken spoke, I did loose a pannier rack screw on my first day and have had to zip tie it ever since.

baghwan
Posts: 37
Joined: Mon Nov 07, 2011 11:05 am

Re: Vivente Randonneur

Postby baghwan » Fri Aug 30, 2013 4:28 am

Haha, guess what I snapped going up a hill today...

User avatar
clackers
Posts: 2065
Joined: Mon May 16, 2011 10:48 am
Location: Melbourne

Re: Vivente Randonneur

Postby clackers » Fri Aug 30, 2013 1:28 pm

baghwan wrote:Haha, guess what I snapped going up a hill today...
Look what happened you cheapskate! :D

Obviously you had your chainbreaker and spare links, which is good, but I assume it was a bit of excitement your day didn't need.

Who is online

Users browsing this forum: No registered users