Help needed - Early 1900's Road Bike

Tinker
Posts: 452
Joined: Tue Feb 21, 2012 8:30 pm

Help needed - Early 1900's Road Bike

Postby Tinker » Thu Sep 05, 2013 4:16 pm

Hi all,

It's recently come to my attention and into my possesion some very old photos of a relative of mine and his cycling history, of which I did not know existed.

I've attached some photos of him with his bike from back around 1913-15 I believe.

It's now my cycling/restoration dream/goal to find an old racing bike/frame from this time periodand restore it back to it's glory days and add a small homage to him by having his name and club possibly hand painted on the bike.

Of course this is all pipe dreams until I can actually locate a bike to make it all happen.

So it i'm reaching out to the fantastic retro cycling community here to see if anyone has or knows of a bike from this area that would be avaialable to undertake such a project with.

I expect it won't be an easy task to track down what I need. However when one has an attachment like this to past cycling history it would be wasteful not to try and connect the past with today.

Regards

Jason

Image

Image

Image

Image

dayne
Posts: 651
Joined: Fri Dec 10, 2010 1:51 pm

Re: Help needed - Early 1900's Road Bike

Postby dayne » Thu Sep 05, 2013 5:21 pm

When you say "restore" do you mean a full repaint and all period correct parts?
Do you want to do the work your self?
and where are you located?
O and whats the budget? up to $500, $500-$1000 or $1000+

Tinker
Posts: 452
Joined: Tue Feb 21, 2012 8:30 pm

Re: Help needed - Early 1900's Road Bike

Postby Tinker » Thu Sep 05, 2013 5:40 pm

Hi Dayne,

My plan is to do a full repaint and use as many period correct pieces on the bike as I can.

I'd most likely be getting others to do the work on this kind of project though.

I'm in Geelong, The GWCC lettering on his club jersey is for Geelong West Cycling Club.

Budget I've not really sat down to think about. Given it could take years to find a frame and all the parts i'd just spend what I needed to spend to get it done right.

dayne
Posts: 651
Joined: Fri Dec 10, 2010 1:51 pm

Re: Help needed - Early 1900's Road Bike

Postby dayne » Thu Sep 05, 2013 6:04 pm

i have sent you a pm

ironhanglider
Posts: 2842
Joined: Fri Apr 17, 2009 9:44 pm
Location: Middle East, Melbourne

Re: Help needed - Early 1900's Road Bike

Postby ironhanglider » Thu Sep 05, 2013 7:42 pm

Hmmm I don't know anything about them pros. I was a GACC man.

Good luck though.

Cheers,

Cameron.

User avatar
GaryF
Posts: 1201
Joined: Wed Dec 27, 2006 1:38 am
Location: Near Bundaberg, Queensland.

Re: Help needed - Early 1900's Road Bike

Postby GaryF » Fri Sep 06, 2013 8:33 am

It might be possible to talk with Shane DeGrandi of DeGrandi Cycles - he might be able to point you in the direction of bike collectors in the Geelong area.

Tinker
Posts: 452
Joined: Tue Feb 21, 2012 8:30 pm

Re: Help needed - Early 1900's Road Bike

Postby Tinker » Fri Sep 06, 2013 9:45 am

Thanks for the advice Gary.

Will be exploring every option I can to track one down.

Torana68
Posts: 1518
Joined: Sat Nov 11, 2006 11:40 am
Location: NSW/ACT
Contact:

Re: Help needed - Early 1900's Road Bike

Postby Torana68 » Fri Sep 06, 2013 10:45 am

look for the "Harvey racer retro old rare... " etc :( on EBAY its had a poor restoration, is too expensive at the moment and might be a little earlier than you want but it would clean into a nice early path bike. No guaranty who made it either unless there are before photos.
Ozpushies! for ALL Australian made bikes.
"It's only original once"

Tinker
Posts: 452
Joined: Tue Feb 21, 2012 8:30 pm

Re: Help needed - Early 1900's Road Bike

Postby Tinker » Fri Sep 06, 2013 11:09 am

Good spot there Torana!

Can't say I'd ever have spotted that given its in the gardening section. :shock:

It certainly seems to tick all of the boxes for what I need in a frame. Shame it's so pricey though.

Might need to contact him about the size given i'm only an avg 5'10.

Thanks for the heads up.

dayne
Posts: 651
Joined: Fri Dec 10, 2010 1:51 pm

Re: Help needed - Early 1900's Road Bike

Postby dayne » Fri Sep 06, 2013 1:46 pm

That poor bike,
What some people do to this is just crazy

Tinker
Posts: 452
Joined: Tue Feb 21, 2012 8:30 pm

Re: Help needed - Early 1900's Road Bike

Postby Tinker » Fri Sep 06, 2013 6:16 pm

There's a great old bike under what they have done to it. :mrgreen:

Who is online

Users browsing this forum: No registered users