FIXIE: Build Thread
-
- Posts: 7
- Joined: Thu Sep 12, 2013 2:32 pm
FIXIE: Build Thread
Postby starkey » Tue Sep 17, 2013 10:02 pm
I started out with this absolute bargain from ebay! A Malvern Star Silhouette '94. It's a super clean frame with no rust and in really good order! Hardly any cosmetic damage! I managed to get the cranks and a set of dropped bars with the frame so I was practically only short of a seat, chain and wheels!
I managed to get a wheelset for a fixie surprisingly cheap off a guy from Facebook. After tweeking the dropouts, I managed to get a few extra mils movement, crucial for gear selection!
As you can see, I got a chain and a C-Unit seat so that the bike is rideable. While I had the angle grinder out from adjusting the dropout, I managed to clean the frame up a bit by knocking all the unnecessary cable and shifter stays off the frame. I dropped the gooseneck down a bit more and set it on a 16/40 ratio using the original crank.
At this stage I'm using this bike to learn how to ride a fixie. I have intentions to do a fair bit more work on this bike so stay tuned!
-
- Posts: 308
- Joined: Mon Feb 21, 2011 8:07 pm
Re: FIXIE: Build Thread
Postby slidetaker » Wed Sep 18, 2013 1:11 pm
Perhaps bartape, foot retention and removal of downtube shifter? more comfy, better control and looks cleaner.
- Jangari
- Posts: 290
- Joined: Mon Jul 20, 2009 2:14 pm
- Location: Sydney
Re: FIXIE: Build Thread
Postby Jangari » Wed Sep 18, 2013 1:28 pm
Also perhaps a front brake.slidetaker wrote:Looks like a solid ride.
Perhaps bartape, foot retention and removal of downtube shifter? more comfy, better control and looks cleaner.
-
- Posts: 7
- Joined: Thu Sep 12, 2013 2:32 pm
Re: FIXIE: Build Thread
Postby starkey » Fri Sep 20, 2013 9:45 am
Not sure how I what colour scheme I want on the bike but if you guys have any suggestions on how to strip the paint that'd be appreciated!
-
- Posts: 82
- Joined: Mon Feb 04, 2013 12:28 pm
Re: FIXIE: Build Thread
Postby apollocreed » Fri Sep 20, 2013 11:05 am
- Mulger bill
- Super Mod
- Posts: 29060
- Joined: Sun Sep 24, 2006 2:41 pm
- Location: Sunbury Vic
Re: FIXIE: Build Thread
Postby Mulger bill » Fri Sep 20, 2013 7:14 pm
Or will once some better bar tape comes along
London Boy 29/12/2011
- The 2nd Womble
- Posts: 3058
- Joined: Wed Jul 27, 2011 1:21 pm
- Location: Brisbane
- Contact:
Re: FIXIE: Build Thread
Postby The 2nd Womble » Fri Sep 20, 2013 7:48 pm
Huge fan of booted RGers who just can't help themselves
- schroeds
- Posts: 879
- Joined: Tue Jul 14, 2009 9:58 pm
Re: FIXIE: Build Thread
Postby schroeds » Fri Sep 20, 2013 11:52 pm
Sent from my HTC Desire S using Tapatalk 2
-
- Posts: 7
- Joined: Thu Sep 12, 2013 2:32 pm
Re: FIXIE: Build Thread
Postby starkey » Sat Sep 21, 2013 4:01 pm
apollocreed: I think I may end up doing that, I guess I'll way up the options and see which is best. I really like the look of the frame, small headtube etc but if it's going to be cheaper to get a better quality frame than paint it then I guess I'll take that route!
Mulger bill: Thanks! It kinda was luck of the draw but when I put the rims on it actually looked really smart! The green on the bike along with the white walls on the tires really finish it off!
The 2nd Wombie: Only worry is keeping all my fingers and toes! Not affecting any of the structural components of the bike! I hope..
schroeds: Chain is so tight, almost too tight if there is such a thing! Next to no play! It was only a cheap chain but once I get new cranks and front cog, I'll invest in some more exy running gear! Who knows, might even start with a new frame depending on everything.
- Jangari
- Posts: 290
- Joined: Mon Jul 20, 2009 2:14 pm
- Location: Sydney
Re: FIXIE: Build Thread
Postby Jangari » Sat Sep 21, 2013 4:04 pm
-
- Posts: 7
- Joined: Thu Sep 12, 2013 2:32 pm
Re: FIXIE: Build Thread
Postby starkey » Sun Sep 22, 2013 3:05 am
- HLC
- Posts: 722
- Joined: Sun Mar 04, 2012 11:23 pm
- Location: Sydney.
Re: FIXIE: Build Thread
Postby HLC » Mon Sep 23, 2013 12:20 pm
the smaller ring will be biopace too, and they do work with a fixed gear.starkey wrote:I had a look, the larger cog is defiantly biopace however, the difference in radius is only pretty marginal, only like 5mm between the widest and thinnest points. The smaller cog on the other hand appears to be circular, I could be wrong as the scaling down in the size might make the variation really small. Regardless, it still all works so I'll probably just leave it as it is for the meantime!
-
- Posts: 7
- Joined: Thu Sep 12, 2013 2:32 pm
Re: FIXIE: Build Thread
Postby starkey » Sat Dec 07, 2013 3:56 pm
I'd initially intended to sand the Silhouette frame down to raw for a grey on black colour scheme, which would've been pretty cool! But halfway through sanding back the frame, I found an old Puch Mistrel A frame that someone was throwing out just up the road from me. For anyone else, this frame wouldn't mean much but for myself it was quite impressive! My dad had bought a Mistrel A back in the 80's as his bike to commute to and from work when he first started his career. Since getting into riding, I've loved the old tubed frame over the new fancy deep carbon frames, they just have a bit more style to them, despite all looking the same.. So I've had dad's old Mistrel as my road bike. Which just so happens to have the exact same paint scheme and size as the Puch that I found! The odd thing is though, I'm not sure whether or not they are actually from the same era. The fact that they have the same paint scheme made me think that they were but my discovered one has a different head tube size to dad's and had better derailers on it..
Back to the build..
This is how she sits right now
I resprayed the fluro green rims to matte black, although I will probably replace these with lighter, powder coated black rims when I get the cash. I've chucked some track style bars on it, which are a lot more curvy and I'm really liking them despite having no area to hold up high. Took the single speed cranks off of the other frame and chucked them on. And to finish the deal, put a spare black wheel on the back to go with the blue and black theme (the front will get a nice new black tire sooner or later) along with a set of brakes for the meantime while I get more comfortable going down hills and stopping, although despite having them, I'm finding I hardly really use them..
Since finishing her off I've been getting around a fair bit on it! Finding the strength back in my legs to climb hills fixed and getting comfortable riding around on the road. I have pretty much done this build as a mode of transport to get to and from uni next year, decent 20k ride with some larger hills on the way. Really looking forward to clocking up some miles on it!
Return to “Fixed Gear/ Single Speed”
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+10:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.