Vintage, yesteryear and retro biking
Time for me to make an entry into this thread. A couple of months ago I decided it was time to get an old clunker as the ride to and leave out front of the shops kind of bike. Found a Shogun 500 on ebay that seamed to fit the bill and was the right size so I made the bid and won it.
I've made a few changes in the month of owning it, with the focus on comfort and function. First the chain needed replacing and the pedals got swapped to some SPDs, a second bidon cage added. A bit of riding convinced me to add an extra layer of tape the bars to make them closer to fatter bars I'd grown used to. A rack and trunk bag where fitted and lights mounted. My first hour plus ride convinced me that the saddle had to go and thankfully the friend I was riding with on that ride happened to have one he didn't want.The 700c conversion was because the tyres needed replacing and having an old set of wheels and spare tyres sitting in the shed a new cassette was a quicker and easier option than working out what 27" tyres would suit me.
Oh, somewhere in there I got a longer stem off ebay, swapped the bell for one that fit better and mounted the Garmin. Only other change planned is to fit some guards then it'll just be a case of replacing things that wear out or brake. It may also find itself with some different tyres on it at some stage and the guards removed to tackle an Audax Tar n Dirt ride.
Clocked up over 500 km on it so far and have been quite happy with it. Sure it's harder work to haul up the hills than the carbon roadie but a lot better for carrying the groceries home and being the 'slow' bike hasn't stopped it from taking a couple of PBs on strava segments.
Anyway, enough writing, here's a pic
I don't have the guards yet.. that's the next thing I want to get. The taking them off reference was to possibly doing a mixed terrain Audax ride, they would go back on, along with the road tyres after the ride though.
Hi everyone, just joined up (finally) and this is my first post. In around 1993 I purchased an army green Shogun Prairie Break Team Expert as in the previous poster's photo. I loved this bike but only had it a very short while and then sold it. Been searching online and seems that this particular model/colour scheme is quite rare. Would be very interested in picking one up sometime (18" or so) so if anyone should hear of one going with as close to possible original specs (would love the original XT thumb shifters!), could they please let me know?
Previous bikes owned (the ones I remember):
Apollo III road (c1984)
Genini Club 105 road (c1987)
Specialized Stump Jumper MTB (c1990)
Raliegh Technium MTB (c1991)
GT Avalanche (1997)
Scott Scale 50 MTB (2010)
GT Rukus dirt jump bike (2012)
Currently.. none but perhaps on the lookout for a tasty old retro MTB!
Fantastic! Looking forward to it. What would be ideal would be direct, side on pics and a length/height dimensions across the text generally so I can scale it.
A friend's Shogun Samurai was terminally damaged in a head on collision on the Yarra trails this past week. Rider was unharmed, but he probably would rather have damaged his body.
Poor little guy. Off to the great big scrap metal furnace in the sky...
bummer, dude. same as my old blue one. they're a nice ride.
I haven't logged in here in awhile but that is pretty. Thanks for sharing.
Time for some updated pics from my rides over the last couple of days. A couple of changes since the last ones, Lugnut should be happy to see the guards on it now. The stand is gone though as it snapped and the front light has been replaced with a dealextreme one with better spread than the old one.
I figure someone in this thread might know what is the correct size seatpost for a 1990(or maybe 1991) trailbreaker. Its currently got a 25.4 post with 0.3mm thickness shim - a total of 26.0 , but the seat post slowly slips. When I measure the inside diameter of the seatpost It does seem bigger than 26.0 but not 26.2. I suspect the clamps been done up on a too small a diameter post so its squashed in a bit. Any one know this or can measure one? Of course I cant find a 26.0 or 26.2 seatpost in my pile of junk, but I bet I just chucked one in the last hard rubbish!
For some actual Shogun content, here's the bike in question...
1.370" x 24 tpi - what sort of stupid standard is that?
If you've figured out the seatpost size I'd love to know too
Just picked up a Shogun Trail Blazer that my neighbour threw out in hard rubbish. Missing seat + seatpost
new to this forum, so be gentle.....
my last project....road bike by stealth....
purchased a shogun team issue ultegra frame an fork on fleabay, migrated parts from a giant crx1 with the addition of 105 brakes.
stage 2 was acquiring some sti levers and completing the project with some bling....I think the frame is about 2004 or 2005 in 6061
doing service as a flatbar road.....with the appropriate refreshments
with added drop bar goodness, and 6700 sti levers
Blinged with some token anodised parts
have been looking throught the forum posts, awsome bikes
have been restoring some shoguns too, lately,
and riding too...
noticed that Dimitrizee said he had a 90's catalog a while back
i'm looking for years 97,98,
have got 92 96 99 & 2000
need to complete the 90's range
otherwise i mght have to petser some LBS's
Too..... many bikes, something has to give
Welcome harro - love to see scans of the catalogs you do have
... or a Hyundai. Sad to see an old steelie die in that way. An unharmed rider can look to replace, though.
Well, no, it's not a pushbike, otherwise I'd be pushing it...
90s welded cro-mo Samurai running a mix of 105, 400ex, RX100, Cyclone. Reliable commuter
it's not a commuter without ugly flat pedals
1990 Peugeot Tourmalet
199x Rod Martin custom
1988 Shogun Celeste Beau
Who is online
Users browsing this forum: Bing [Bot], Clintoo