thinnest road tyre on my MTB?
-
- Posts: 23
- Joined: Tue Nov 04, 2008 12:44 am
- Location: Melbourne VIC
thinnest road tyre on my MTB?
Postby marbs » Mon Nov 17, 2008 1:26 pm
hi all,
i have a malvern star xt3000 mtb which currently has:
Weinmann Zac 19 Double Wall 36H rims/wheelset & Kenda 26x1.95†A/V tyres
just wondering, what would be the thinnest road tyres/slicks i can put on? and also will i have to replace the existing tubes with new ones?
any help would be much appreciated
thanks
i have a malvern star xt3000 mtb which currently has:
Weinmann Zac 19 Double Wall 36H rims/wheelset & Kenda 26x1.95†A/V tyres
just wondering, what would be the thinnest road tyres/slicks i can put on? and also will i have to replace the existing tubes with new ones?
any help would be much appreciated
thanks
- Kalgrm
- Super Mod
- Posts: 9653
- Joined: Fri May 25, 2007 5:21 pm
- Location: Success, WA
- Contact:
-
- Posts: 118
- Joined: Fri Feb 23, 2007 11:27 am
- Location: Sydney
Re: thinnest road tyre on my MTB?
Postby artemidorus » Mon Nov 17, 2008 3:40 pm
Continental make a 25mm Grand Prix tyre for 559mm (26") rims. If your rims are 19 mm wide, however, as is suggested by the name, then technically the smallest tyre that you use should be 28 mm (Sheldon Brown). You will not be able to stuff a tube for a 2" tyre into a 1" or 1 1/8" tyre, not without great heartache anyway.marbs wrote:hi all,
i have a malvern star xt3000 mtb which currently has:
Weinmann Zac 19 Double Wall 36H rims/wheelset & Kenda 26x1.95†A/V tyres
just wondering, what would be the thinnest road tyres/slicks i can put on? and also will i have to replace the existing tubes with new ones?
any help would be much appreciated
thanks
-
- Posts: 118
- Joined: Fri Feb 23, 2007 11:27 am
- Location: Sydney
Postby artemidorus » Mon Nov 17, 2008 5:54 pm
Continental Sport Contact at 32 mm are another good option.
-
- Posts: 23
- Joined: Tue Nov 04, 2008 12:44 am
- Location: Melbourne VIC
Postby marbs » Mon Nov 17, 2008 8:19 pm
i know there will be a huge range in price on the different brands/kinds of tyres/tubes...
just after something half decent, doesnt have to be the best as i have a feeling i'll end up upgrading the bike later down the track (prolly sooner rather than later).. as the few times ive been out so far, im really enjoying it and kinda gettin addicted...
how much would i be roughly looking at for a set of tyres and tubes thats something half decent?
just after something half decent, doesnt have to be the best as i have a feeling i'll end up upgrading the bike later down the track (prolly sooner rather than later).. as the few times ive been out so far, im really enjoying it and kinda gettin addicted...
how much would i be roughly looking at for a set of tyres and tubes thats something half decent?
-
- Posts: 28
- Joined: Mon Sep 22, 2008 8:03 pm
Postby bish » Tue Nov 18, 2008 12:13 pm
I've had success with the Innova slicks
http://www.torpedo7.com.au/products/INTYMNNSL
Used the 1.75s and now the 1.25s and haven't yet got a puncture (but now that I've said that I will haha). Easy on the wallet to try out a slick and they are actually pretty good.
http://www.torpedo7.com.au/products/INTYMNNSL
Used the 1.75s and now the 1.25s and haven't yet got a puncture (but now that I've said that I will haha). Easy on the wallet to try out a slick and they are actually pretty good.
- sittingbison
- Posts: 609
- Joined: Mon Aug 11, 2008 4:44 pm
- Location: Subi, WA
- Contact:
Postby sittingbison » Tue Nov 18, 2008 12:34 pm
conti sport contact 1.3 for me as well
I have a cunning plan, as cunning as a fox who's just been appointed Professor of Cunning at Oxford University
-
- Posts: 23
- Joined: Tue Nov 04, 2008 12:44 am
- Location: Melbourne VIC
Postby marbs » Tue Nov 18, 2008 1:23 pm
awesome thanks...
the innovas seem cheap to try out? anyone know where i can innova tyres n tubes from in melb preferably se suburbs, obviously t7 is in syd?
and also, presta or schrader or doesnt really matter? gonna be pumping the tyres up to aroud 100psi if that matters at all on the type of valve i get
the innovas seem cheap to try out? anyone know where i can innova tyres n tubes from in melb preferably se suburbs, obviously t7 is in syd?
and also, presta or schrader or doesnt really matter? gonna be pumping the tyres up to aroud 100psi if that matters at all on the type of valve i get
- m@
- Posts: 5112
- Joined: Tue Apr 15, 2008 12:20 pm
- Location: Wurundjeri Country
- Contact:
Postby m@ » Tue Nov 18, 2008 2:33 pm
You've gotta get the same valve type as your rims - ie small hole = presta, wide hole = schrader. Torpedo7 are NZ based, but only ever charge $10 freight - so if each tyre and tube is at least $2.50 cheaper than your LBS (which is likely), you'll still come out ahead.
- Nate
- Posts: 3209
- Joined: Mon Oct 20, 2008 8:49 pm
- Contact:
Postby Nate » Wed Nov 19, 2008 8:43 am
I ran ritchey tom slicks - 1"
no issues at all.
There were a few scary reviews & blowouts on MTBR, but i never had a puncture in 1500km+ riding & they were in top condiiton.
I agree with the valves, you MUST get a tube that is for your rim, you can get little nuts that help the fit, but its just better to get the proper valve for the rim.
Also you'll be running higher pressures, so a proper track/floor pump & high pressure (thin barrel) hand pump are a MUST.
no issues at all.
There were a few scary reviews & blowouts on MTBR, but i never had a puncture in 1500km+ riding & they were in top condiiton.
I agree with the valves, you MUST get a tube that is for your rim, you can get little nuts that help the fit, but its just better to get the proper valve for the rim.
Also you'll be running higher pressures, so a proper track/floor pump & high pressure (thin barrel) hand pump are a MUST.
-
- Posts: 23
- Joined: Tue Nov 04, 2008 12:44 am
- Location: Melbourne VIC
Postby marbs » Wed Nov 19, 2008 4:57 pm
fair enuffs thanks... i guess if i go that route ill get the schrader tubes then :}
im saying if cos im now contemplating in investing in a proper road bike.. yes the bug has already bitten and ive only just started out... well i guess it doesnt help that a few work colleagues egging me on/peer pressuring hehe (cos they ride but also compete in triathlons etc and have expensive bikes )
see how we go... whether to spend the money on bar ends, tyres, tubes etc or just save it towards a proper road bike
time will tell
im saying if cos im now contemplating in investing in a proper road bike.. yes the bug has already bitten and ive only just started out... well i guess it doesnt help that a few work colleagues egging me on/peer pressuring hehe (cos they ride but also compete in triathlons etc and have expensive bikes )
see how we go... whether to spend the money on bar ends, tyres, tubes etc or just save it towards a proper road bike
time will tell
- Kalgrm
- Super Mod
- Posts: 9653
- Joined: Fri May 25, 2007 5:21 pm
- Location: Success, WA
- Contact:
Postby Kalgrm » Wed Nov 19, 2008 5:09 pm
G'day marbs,
Find out how real they are about peer group pressure by asking if you can borrow one of their bikes for a 30 minute spin!
Seriously though, if you get to ride one of their decent road bikes, the addiction will well and truly sink it's claws in. You will see a huge difference in ride characteristic between a cheap MTB and a flash road bike.
Cheers,
Graeme
Find out how real they are about peer group pressure by asking if you can borrow one of their bikes for a 30 minute spin!
Seriously though, if you get to ride one of their decent road bikes, the addiction will well and truly sink it's claws in. You will see a huge difference in ride characteristic between a cheap MTB and a flash road bike.
Cheers,
Graeme
Think outside the double triangle.
---------------------
Music was better when ugly people were allowed to make it ....
---------------------
Music was better when ugly people were allowed to make it ....
- sittingbison
- Posts: 609
- Joined: Mon Aug 11, 2008 4:44 pm
- Location: Subi, WA
- Contact:
Postby sittingbison » Wed Nov 19, 2008 6:16 pm
even between a cheap MTB and a flashy MTB
I have a cunning plan, as cunning as a fox who's just been appointed Professor of Cunning at Oxford University
- Andrew69
- Posts: 300
- Joined: Thu Jun 07, 2007 6:36 pm
Jump to
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: The Great Boffo
- All times are UTC+10:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
Brought to you by Bicycles Network Australia | © 1999 - 2024 | Powered by phpBB ®
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.