tri bars

[Mulger bill]

I've got one of those 'puters stated, the mounting bracket is adaptable for bar or stem mounting

Shaun

[thomas_cho]

I noticed before a lot of people have mounted their Sigma 1606L on the stem. I have a question, is it now pointing to the side? if not how to make it point straight?
Sorry for going off topic.

Hi there, the mounting plate for the computer can be unscrewed from the base. You can then rotate the mounting plate.

Let me know if you need a pic.

[stated]

Hi there, the mounting plate for the computer can be unscrewed from the base. You can then rotate the mounting plate.

Let me know if you need a pic.[/quote]

I've looked at those screws before, problem is they are in rectangular shape, so I don't see how I can turn it 90degrees, only 180degrees..

[thomas_cho]

Hi there, the mounting plate for the computer can be unscrewed from the base. You can then rotate the mounting plate.

Let me know if you need a pic.

I've looked at those screws before, problem is they are in rectangular shape, so I don't see how I can turn it 90degrees, only 180degrees.. [/quote]

I guess a picture would be clearer, you may not have noticed the additional screw holes on the computer mount.



The picture shows the base unscrewed from the computer mount, you can rotate the base 90 degrees.

[Mulger bill]

It does work Stated, here's my unit...


I'll check the manual when I get home.

Shaun

[stated]

I guess a picture would be clearer, you may not have noticed the additional screw holes on the computer mount. [quote]

thanks for that champ its all clear now