Chappelli Single/Fixed Speed

Wild Goose
Posts: 3
Joined: Fri Dec 25, 2009 3:55 pm

Chappelli Single/Fixed Speed

Postby Wild Goose » Fri Dec 25, 2009 4:04 pm

PLEASE NOTE: This thread is now archived.
You can refer to the newer discussion thread on Bicycles Network Australia about Chappelli bikes here >


-----

Hi all,

Am after some advice as im in the process of researching for a new bike. Looking at a single speed for getting around, nothing too serious at this stage as my knowledge is limited and id like to work my way up to something more substantial in the future. Have looked at a few bikes online but im not always sure what i should be checking for so if youre able to give me any pointers or recommendations that would be greatly appreciated. i like the look of the bikes on the below link but not sure if these are cheap/bad quality?? hoping to spend in the vicinity of $500-700 if possible. any advice would be great, cheers

http://www.chappelli.com/products.html

Key Features:

* Deep silver, painted alloy rims
* Sealed bottom bracket
* Flip/Flop hub to convert to fixie
* Front hub 46T, Rear hub 16T
* Steel frame, 13kg total weight

Fletcher
Posts: 1122
Joined: Fri Jul 24, 2009 5:50 pm
Location: Melba, ACT

Re: Chappelli Single/Fixed Speed

Postby Fletcher » Fri Dec 25, 2009 7:23 pm

Sorry, I grew up with Greg Chappell as the Australian cricket captain, his elder brother occupying the position before him. These guys pop into my head whenever I hear the name Chapelli. The name has forever been tainted for me. Sorry for the hijack, I just had to put that out there. Carry on folks.

User avatar
ghettro
Posts: 960
Joined: Mon Mar 02, 2009 9:38 am
Location: London, UK

Re: Chappelli Single/Fixed Speed

Postby ghettro » Fri Dec 25, 2009 10:15 pm

I would guess that the Chapellis are about the same standard as the $99 industrie bikes, cheap, lowish quality mostly to catch onto the fixie fad (quite late now). Probably fine for a beater or just to get around on though.

User avatar
Mulger bill
Super Mod
Super Mod
Posts: 29060
Joined: Sun Sep 24, 2006 2:41 pm
Location: Sunbury Vic

Re: Chappelli Single/Fixed Speed

Postby Mulger bill » Fri Dec 25, 2009 11:35 pm

Heavy little buggers.
...whatever the road rules, self-preservation is the absolute priority for a cyclist when mixing it with motorised traffic.
London Boy 29/12/2011

brauluver
Posts: 3646
Joined: Thu Sep 11, 2008 10:23 pm
Location: Adelaide N/E

Re: Chappelli Single/Fixed Speed

Postby brauluver » Sat Dec 26, 2009 9:27 am

Drop into bike exchange www.bikeexchange.com.au

Type in you state and search.

In your price range you'd be better to with a Fuji track classic or an SE lager for value.Cro Mo frame etc....
Aluminium frame then Giant Bowery is a well priced choice.

User avatar
nickobec
Posts: 2271
Joined: Fri Mar 27, 2009 12:51 am
Location: Perth or 42km south as the singlespeed flies
Contact:

Re: Chappelli Single/Fixed Speed

Postby nickobec » Sat Dec 26, 2009 4:49 pm

Wild Goose wrote:Steel frame, 13kg total weight
That is more than 3kg heavier than my steel single speed (converted 1990 road bike - note cost about the same for donor bike, parts and painting excluding labour)

I have not seen a Chappelli in the flesh, but the extra 3kg and those old style single pivot brakes are a warning signs to me.

Still if the finish was good and I did not want to ride more than 5km, It might be an option.

For $200 more, ie $600 you can get a Maurice Cro-Mo, Cell Mallet or Fuji Classic Track (and front brake)

For $800 a Gaint Bowery or Felt Brougham.

Personally I like the looks of the Mallet, plus I am a steel fan.

User avatar
rearviewmirror
Posts: 197
Joined: Sat Nov 21, 2009 10:10 am
Location: Williamstown, Victoria
Contact:

Re: Chappelli Single/Fixed Speed

Postby rearviewmirror » Mon Dec 28, 2009 12:13 pm

A Giant Bowery is in your price range, hell my used Bianchi Pista is too. These bikes, Chapelli and Industrie are the bottom of the barrel, don't waste your time.

Wild Goose
Posts: 3
Joined: Fri Dec 25, 2009 3:55 pm

Re: Chappelli Single/Fixed Speed

Postby Wild Goose » Mon Dec 28, 2009 4:33 pm

thanks all, will continue to research.

Wild Goose
Posts: 3
Joined: Fri Dec 25, 2009 3:55 pm

Re: Chappelli Single/Fixed Speed

Postby Wild Goose » Mon Dec 28, 2009 5:18 pm

thanks for the suggestions, quite like the fuji feather too. any similar suggestions would be great! have a friend that works at a bike shop so might run these options past him, just didnt want to take too much of his time up when i should be doing the research!

brauluver
Posts: 3646
Joined: Thu Sep 11, 2008 10:23 pm
Location: Adelaide N/E

Re: Chappelli Single/Fixed Speed

Postby brauluver » Mon Dec 28, 2009 8:08 pm

oops wrong post :oops:

removed it now.
Last edited by brauluver on Wed Dec 30, 2009 7:04 am, edited 1 time in total.

User avatar
hartleymartin
Posts: 5153
Joined: Thu Feb 19, 2009 6:56 pm
Location: Fairfield, NSW

Re: Chappelli Single/Fixed Speed

Postby hartleymartin » Wed Dec 30, 2009 12:23 am

It is a lot cheaper to find a suitable old road bicycle that you like and kit it out with a set of flip-flop wheels. It'll probably end up with better components too.
Martin Christopher Hartley

http://raleightwenty.webs.com - the top web resource for the Raleigh Twenty

531db
Posts: 981
Joined: Mon Nov 20, 2006 7:25 pm
Location: Riding a real steel bike - somewhere!

Re: Chappelli Single/Fixed Speed

Postby 531db » Thu Dec 31, 2009 12:26 pm

Fairly low spec SS/FG, you could definitely do better.

Gotta love the BS connecting a young Roberto Chappelli riding a UK time trial in 1960 (which would have only been associated with the Tour de France by vitue of the time of year) to the current goods on offer.

Some will be suckered though.......

User avatar
munga
Posts: 7023
Joined: Mon Jan 28, 2008 3:17 pm
Location: wowe
Contact:

Re: Chappelli Single/Fixed Speed

Postby munga » Tue Jan 05, 2010 8:57 am

wow they are almost like stepping back in time. so similar to a 1960's tt bike.. :roll:

the fixed gear apocalypse is nigh!

the fixed gear apocalypse is nigh!

Tom@Chappelli
Posts: 5
Joined: Tue Jan 05, 2010 12:43 pm

Re: Chappelli Single/Fixed Speed

Postby Tom@Chappelli » Tue Jan 05, 2010 1:23 pm

Hi,

I'm one of the two guys behind Chappelli Cycles and have been following your posts with interest. Thanks to all those who have shown an interest in what we are doing. My business partner Pablo and I launched Chappelli with a view to creating a quality online bicycle retailer in Australia, offering good looking bicycles direct to the public and passing on the savings, as our view is that bicycles in Australa are too expensive. Our first range of bicycles is a single speed bicycle that is fairly simple and as pointed out not spec'd out to the highest level as we didn't want to over spec the bike and make it too expensive for many people. We have taken care to use the best possible parts and made several revisions to our original spec including better quality pivot brakes and an closed bracket hub. Our manufacturer currently produces bicycles for a couple of well known and reputable brands in the US and Europe so the quality of the bicycles is good. I've been riding mine around Bondi and eastern suburbs to test it for about 6 months without any issues. For a special launch price $399 I think our single speeds offer great value for money.

However we can always improve and so value all the comments and input. We are currently working on our next range of single speeds and so appreciate all the feedback. We will look at different brakes, how to make it lighter and also perhaps have a better cog ratio for Sydneys notorious hills. Incidentally the 54cm bikes are 11.6kg and the 56cm are 11.8kg not 13kg, which is the boxed weight.

We are also looking at how best to expand the range but we wanted to launch with something simple which we understood to start the brand and understand the market better. Please tom@chappelli.com with any comments ideas or comments you don't want to post.

Cheers
Tom

PS. Roberto Chappelli is my business partners dad - he has been over here from the UK helping us launch the business and assembling the bicycles and he still rides a single speed bike, although not as fast as he used to. :)
Last edited by Tom@Chappelli on Tue Jan 05, 2010 6:32 pm, edited 1 time in total.

brauluver
Posts: 3646
Joined: Thu Sep 11, 2008 10:23 pm
Location: Adelaide N/E

Re: Chappelli Single/Fixed Speed

Postby brauluver » Tue Jan 05, 2010 2:30 pm

Tom@Chappelli wrote:Hi,
Incidentally the 54cm bikes are 11.6kg and the 56cm are 11.8kg not 13kg, which is the boxed weight.
Crikeys that's heavy, comparable to a SE draft(anchor).

User avatar
Lark2004
Posts: 1455
Joined: Sat Aug 09, 2008 3:02 pm
Location: Lawnton, 25k north of Brisbane

Re: Chappelli Single/Fixed Speed

Postby Lark2004 » Tue Jan 05, 2010 3:04 pm

Have to agree with Brauluver here.... 11+ kgs for a single speed is a bit on the heavy side.

My S/S is only a converted Repco Superlight, so only the main tubes of the frame are Cr-Mo, and straight guage too, not butted (although I do have a nice set of Pinny forks on it, but they are only 300g lighter than the originals), the stays are just Hi-Ten steel. The whole bike comes in at 9.5 kgs... and it's not really made with light weight parts either (the Kalloy Uno seatpost for example, is still 300mm long, about 2/3 of it is in the frame, and the Kenda Koncept tyre's are certainly not a light option).

Maybe you could reduce some weight through a different wheelset?
Andrew

User avatar
Verbs & Nouns
Posts: 778
Joined: Wed Jul 23, 2008 9:13 am
Location: Australia, South

Re: Chappelli Single/Fixed Speed

Postby Verbs & Nouns » Tue Jan 05, 2010 3:44 pm

Image

Those red rims are going to a) look like crap once you start braking on them and b) probably not provide the best stopping ability.

Maybe google "unipack" and see what happened in London with cheap complete bikes.
Ten Grand wrote:Goddamnit baby, this is soul... What's wrong with you?

brauluver
Posts: 3646
Joined: Thu Sep 11, 2008 10:23 pm
Location: Adelaide N/E

Re: Chappelli Single/Fixed Speed

Postby brauluver » Tue Jan 05, 2010 4:50 pm

Tom@Chappelli wrote:


We are also looking at doing a womens bike as well as multiple speed internal hub bikes to expand the range but we wanted to launch with something simple which we understood to start the brand and understand the market better.
Cheers
Tom
I know this is from the Market place, but I'm wondering if your post matter doesn't breach some of these guidelines? viewtopic.php?f=25&t=1116
Last edited by brauluver on Tue Jan 05, 2010 9:59 pm, edited 1 time in total.

Tom@Chappelli
Posts: 5
Joined: Tue Jan 05, 2010 12:43 pm

Re: Chappelli Single/Fixed Speed

Postby Tom@Chappelli » Tue Jan 05, 2010 6:42 pm

(AT) Brauluver - Thanks - Hopefully I've removed the offending parts.

Regarding the rims - I've been riding a bike with white rims for six months and it has very minor markings on the rims left by the black brake pads. Every two weeks I give it a wipe with a wet cloth and remove the build up and they are still in pretty good condition. I've been trying to find someone to supply colored brake pads but to no avail. The photos of the bikes were taken using the sample bikes that we have been riding around on so the wear and tear on the rims from the brakes is minimal. As to brakeability - obviously the brakability is reduced slightly as the rims aren't flat and so the pads don't grip as well as on machined rims. Its something that we considered but it removes from the aesthetic of the rims and there didn't seem to be much demand for it. But happy to look at that if its a big deal. For those that will ride it as a fixed wheel it shouldn't be a problem.
Last edited by Tom@Chappelli on Mon Jan 11, 2010 6:04 pm, edited 1 time in total.

rustychisel
Posts: 3493
Joined: Thu Jan 10, 2008 1:39 pm

Re: Chappelli Single/Fixed Speed

Postby rustychisel » Tue Jan 05, 2010 10:09 pm

I'd have thought you ran the response past a moderator first, but...

Re: Brake pads. Colour of pads doesn't matter. It's the material and the fact they'll wear or scuff the rim anyway.

I'll disagree on one point, if you're riding fixed gear it's critical brakes work as well as possible, and to my mind that means a machined rim on the front. I say again; critical.

[brakes and fixed gear are a necessity, not a dictate of fashion. Said with the experience of 7 years riding and commuting on fixed gear bikes, always with one brake - the front].

hot
Posts: 2
Joined: Fri Feb 05, 2010 12:19 pm

Re: Chappelli Single/Fixed Speed

Postby hot » Fri Feb 05, 2010 12:39 pm

Saw one of these in the flesh the other day. No new comments other than what's been said. Really heavy. Welds looked pretty rough. Bake set up was really wierd. Like they were from the 70's, contacted about halway down the rim. The guy said the cranks or bottom bracket was all loose or stuffed after only one ride. I guess you get what you pay for, looked like a kmart bike with some nice colours. I'd be looking at something else.

LOUDERPLEASE
Posts: 25
Joined: Fri Jan 29, 2010 9:21 pm

Re: Chappelli Single/Fixed Speed

Postby LOUDERPLEASE » Fri Feb 05, 2010 2:10 pm

hot wrote:Saw one of these in the flesh the other day. Really heavy.
You can weight things by looking at them?

rustychisel
Posts: 3493
Joined: Thu Jan 10, 2008 1:39 pm

Re: Chappelli Single/Fixed Speed

Postby rustychisel » Fri Feb 05, 2010 4:56 pm

I can, can't you?

Often during summer I'll be at the beach and say to myself 'don't get many of those to the pound'. :wink: :wink:

brauluver
Posts: 3646
Joined: Thu Sep 11, 2008 10:23 pm
Location: Adelaide N/E

Re: Chappelli Single/Fixed Speed

Postby brauluver » Fri Feb 05, 2010 5:59 pm

rustychisel wrote:I can, can't you?

Often during summer I'll be at the beach and say to myself 'don't get many of those to the pound'. :wink: :wink:
You old scoundrel you! :lol:

LOUDERPLEASE
Posts: 25
Joined: Fri Jan 29, 2010 9:21 pm

Re: Chappelli Single/Fixed Speed

Postby LOUDERPLEASE » Sat Feb 06, 2010 12:10 am

We can all see a fat chick and have a stab at the poundage.....but a bike? I dunno - maybe I'm not hipsta enough to care.?

Edit: Besides - unless you're a jockey (or silly fat man from Brighton in spandex......) can you really feel the diff between a couple of kilo's either way?

If the answer is "yes" - man up.....or ride back from the bottle-o with a 6 pack to compensate.

Who is online

Users browsing this forum: Amazon [Bot]