My first fixie - Project MBK SS

User avatar
dodgiebros
Posts: 294
Joined: Tue Jan 26, 2010 5:51 am
Location: Penriff NSW

My first fixie - Project MBK SS

Postby dodgiebros » Sat Jan 30, 2010 11:24 pm

G'day all,

I've caught the bug and started my first fixie. The bike is an MBK Super Sprint that I rescued from
the dump a couple of years ago. She was in a bad way but starting to look healthier now :)
As soon as I can post pics, I will (still got a few days to go).
I have some pics here.

Troy

User avatar
Scuba23
Posts: 487
Joined: Sun Aug 09, 2009 11:40 pm
Location: Bunbury - WA

Re: My first fixie - Project MBK SS

Postby Scuba23 » Tue Feb 02, 2010 4:39 pm

Looking good! liking the blue finish you've chosen! Couple of quick questions if I may (i'm still trying to find a decent frame for my fixie project)

* what size gearing are you running? Are you sticking with the double chainring up front? or looking to add a single?
* A couple of guys i ride with here have added a front brake, your thoughts?
* Did you add a clear gloss top coat to your paint job or stick with the finish you got from the spray cans?

Keep up the good work, hope to see more photos when she is all finished.
I have to ride early in the morning, before my brain figures out what I'm doing...

LOUDERPLEASE
Posts: 25
Joined: Fri Jan 29, 2010 9:21 pm

Re: My first fixie - Project MBK SS

Postby LOUDERPLEASE » Tue Feb 02, 2010 7:14 pm

Nice work - good to see someone put in a whole lot of elbow grease instead of just slapping a bunch of new parts together.

User avatar
dodgiebros
Posts: 294
Joined: Tue Jan 26, 2010 5:51 am
Location: Penriff NSW

Re: My first fixie - Project MBK SS

Postby dodgiebros » Tue Feb 02, 2010 11:05 pm

thanks Scuba and LP for comments.

Scuba, I've set up the gearing at 42/16 to start with and see how I go when I take it for a decent ride.
I wanted to keep the bike as original as I can and luckily the inner chainring is only a couple of mm out of line.
I didn't like the look of the outer ring but it's part of the crank, so I'm in the process filing the teeth off. ( I hope
it'll look better)
I bought the back wheel just to get on the road, my LBS didn't have any 36 hole flip flops. When
I get one I'll lace up the original rim. But I do like the look of the black in the new one though ... 8)
Front brake is coming next (before decent ride) :wink: , bar tape, pedals and a better seat.
The paint.... I'm never gonna 'rattle can' again :!: :lol: especially hard to paint metalic and get an even coating.
About 5 coats of cyan metalic and 5 of clear then a good No.2 polish a week later. I'd already had bleeding fingers
from heaps of wet sanding / polishing and pressing the can nozzle was a killer :cry:

Troy

User avatar
dodgiebros
Posts: 294
Joined: Tue Jan 26, 2010 5:51 am
Location: Penriff NSW

Re: My first fixie - Project MBK SS

Postby dodgiebros » Wed Feb 03, 2010 12:22 am

Cool 8) I can insert pics now :D

Before

Image

current unfinished

Image

LOUDERPLEASE
Posts: 25
Joined: Fri Jan 29, 2010 9:21 pm

Re: My first fixie - Project MBK SS

Postby LOUDERPLEASE » Wed Feb 03, 2010 8:30 am

Dodgy - rather than taking the teeth off the outer ring, I reckon you could be better off removing the inner one as it is prob too small anyhow. I cut mine with a grinder, undid the bolts and chucked it. Chain alignment turned out perfect.

I've now got 48/18 which is perfect for me.

Cheers

User avatar
dodgiebros
Posts: 294
Joined: Tue Jan 26, 2010 5:51 am
Location: Penriff NSW

Re: My first fixie - Project MBK SS

Postby dodgiebros » Wed Feb 03, 2010 3:16 pm

LP yeah I would but the outer ring is too far out of line. 42/16 = 69", your 48/18 = 70.1", mine slightly shorter.
I had to have a ride and see.... bad mistake :( ie. still no brake :roll: Went for a cruise into town and
all was going well, smooth ride, comfortable, thinking a longer gear could be the go etc...
then the old 'car door' opening in front of me :shock: I don't know if a brake would have helped much, but
over I went. Laying on the road under my bike and a fella with the look of shock and panic on his face :oops:
Anyways, damage report: Bike:
front wheel buckled (hopefully not beyond repair)
forks bent and twisted a bit
bar tape (only 1/2 hr old) ripped :cry:
unbelievably duco is ok :)

Me:
left forearm, elbow and palms... still in the bitumen :cry:

Troy

User avatar
familyguy
Posts: 8354
Joined: Wed Apr 16, 2008 2:30 pm
Location: Willoughby, NSW

Re: My first fixie - Project MBK SS

Postby familyguy » Wed Feb 03, 2010 3:33 pm

Let me be the first to say: sh****************************************t, what incredibly bad luck!!

I see why brakes are good. At least the guy didnt drive off. Hope the pain goes so you can fix the bike. I was just thinking 'how good did those hubs polish up!'

Jim

User avatar
Verbs & Nouns
Posts: 778
Joined: Wed Jul 23, 2008 9:13 am
Location: Australia, South

Re: My first fixie - Project MBK SS

Postby Verbs & Nouns » Wed Feb 03, 2010 3:47 pm

If you know how to stop a brakeless fixed, it helps.

Clips and straps help this.
Ten Grand wrote:Goddamnit baby, this is soul... What's wrong with you?

User avatar
dodgiebros
Posts: 294
Joined: Tue Jan 26, 2010 5:51 am
Location: Penriff NSW

Re: My first fixie - Project MBK SS

Postby dodgiebros » Wed Feb 03, 2010 5:37 pm

thanks for concern Jim :) thinking about it now, it was kinda fun in a weird way 8)
Reminded me of being a kid having a stack, only mum ain't here with the Dettol
and Mecurochrome :lol:

Verbs.. I see what ya mean, If I was strapped in, I'd have more controlled back pressure
and could have locked the wheel yeah?
Not strapped in it just through me over the bars.

LOUDERPLEASE
Posts: 25
Joined: Fri Jan 29, 2010 9:21 pm

Re: My first fixie - Project MBK SS

Postby LOUDERPLEASE » Wed Feb 03, 2010 10:17 pm

Ohh dude - I'm sorry to hear this. Has to be one of my biggest fears when riding. Glad nothing too savage seems to have happened.

User avatar
Verbs & Nouns
Posts: 778
Joined: Wed Jul 23, 2008 9:13 am
Location: Australia, South

Re: My first fixie - Project MBK SS

Postby Verbs & Nouns » Thu Feb 04, 2010 10:48 am

dodgiebros wrote: Verbs.. I see what ya mean, If I was strapped in, I'd have more controlled back pressure
and could have locked the wheel yeah?
Not strapped in it just through me over the bars.
Yeah, kinda. You can resist your legs, pulling up with your front foot into the straps, pushing with your back foot, therefore skidding.
Ten Grand wrote:Goddamnit baby, this is soul... What's wrong with you?

User avatar
hartleymartin
Posts: 5153
Joined: Thu Feb 19, 2009 6:56 pm
Location: Fairfield, NSW

Re: My first fixie - Project MBK SS

Postby hartleymartin » Thu Feb 04, 2010 6:28 pm

So, I surmise that today's lesson is that brakes are a good idea?

Sorry to hear you crashed your new steed. If your 48T chainring is too far out for good chainline, why not get a new bottom bracket with a shorter spindle? They only cost about $20 to $30.
Martin Christopher Hartley

http://raleightwenty.webs.com - the top web resource for the Raleigh Twenty

User avatar
dodgiebros
Posts: 294
Joined: Tue Jan 26, 2010 5:51 am
Location: Penriff NSW

Re: My first fixie - Project MBK SS

Postby dodgiebros » Fri Feb 05, 2010 9:01 pm

cheers fella's LP & Hartley for concerns :wink: I'm gettin there.... the body not as resilient
these days :( see how I go tomorrow on a ride with the local cycling club :| (on geared bike 8) )

Hartley, good idea but I've already started filing the teeth down (52 btw) and the hassle of chasing down a BB to suit... nah.
I couldn't get the BB out to start with anyway :x broke a couple of teeth of BB tool then I gave up. (had to mask it for painting)
I think 42T will be ok. I'll keep the freewheel at 16T (69") and try a 15T (73.7") for the fixed side.

Anyone know where I can get a 36H flip-flop reliably online? Been searching but have only seen 32H hubs.

User avatar
hartleymartin
Posts: 5153
Joined: Thu Feb 19, 2009 6:56 pm
Location: Fairfield, NSW

Re: My first fixie - Project MBK SS

Postby hartleymartin » Fri Feb 05, 2010 10:55 pm

Yeah - grind off the teeth and at least you have a good bash-guard for your chainring - it'll also help keep your shoe-laces out of the chain.
Martin Christopher Hartley

http://raleightwenty.webs.com - the top web resource for the Raleigh Twenty

User avatar
dodgiebros
Posts: 294
Joined: Tue Jan 26, 2010 5:51 am
Location: Penriff NSW

Safety update - Project MBK SS

Postby dodgiebros » Mon Feb 08, 2010 12:11 pm

SAFETY UPDATE :mrgreen: Yes, I've learnt the hard way and fitted the front brake and
clipless pedals. Went for a ride up town with some confidence of stopping today. 8)

I've filed the chainring teeth down and as Hartley said, I've got a chain guard. I had to pull
the front wheel apart to get it straight(ish) again. It's not perfect but it survived the stack. :)
For now I've taped up the bar tape that ripped until I get another one. I don't know if I like
the colour of it... was thinking just black... any thoughts????
Image

LOUDERPLEASE
Posts: 25
Joined: Fri Jan 29, 2010 9:21 pm

Re: My first fixie - Project MBK SS

Postby LOUDERPLEASE » Mon Feb 08, 2010 4:47 pm

Looks grouse - the bar tape suits it.

On a somewhat unrelated note - turning right on to city rd just before a brakeless fixie rider (brown colored frame) almost had himself wiped out running a red light in front of me......brakes kids, brakes. I do not want my car scratched or spattered with teeth and blood.

User avatar
Mulger bill
Super Mod
Super Mod
Posts: 29060
Joined: Sun Sep 24, 2006 2:41 pm
Location: Sunbury Vic

Re: My first fixie - Project MBK SS

Postby Mulger bill » Mon Feb 08, 2010 10:22 pm

Get more of the black/blue tape Dodgy, works very well.

Shaun
...whatever the road rules, self-preservation is the absolute priority for a cyclist when mixing it with motorised traffic.
London Boy 29/12/2011

User avatar
SeanB
Posts: 233
Joined: Sun Jan 17, 2010 5:40 pm
Location: S Adelaide, SA

Re: My first fixie - Project MBK SS

Postby SeanB » Tue Feb 09, 2010 9:47 pm

looking sweet.

User avatar
hartleymartin
Posts: 5153
Joined: Thu Feb 19, 2009 6:56 pm
Location: Fairfield, NSW

Re: My first fixie - Project MBK SS

Postby hartleymartin » Wed Feb 10, 2010 2:32 pm

I wouldn't touch the colour scheme - looks fantastic.
Martin Christopher Hartley

http://raleightwenty.webs.com - the top web resource for the Raleigh Twenty

User avatar
dodgiebros
Posts: 294
Joined: Tue Jan 26, 2010 5:51 am
Location: Penriff NSW

Re: My first fixie - Project MBK SS

Postby dodgiebros » Wed Feb 10, 2010 8:44 pm

cheers lads on the bar tape, I know it's cosmetic but thought the colours might go against the age/retro style thingy.... ya know?....

I did have thought about gearing though.... I'm using the inner chainring which is 42T and it's bolted to the outer chainring (now chain guard)... So, am
I able to swap it for maybe a 44T or higher? Measuring the radius to the 5 spoke bolts = approx 60mm. But on my roadie (old school Shimano RSX)
it's aprox 55mm. Is there a standard? Has standards changed over the years?

Troy

User avatar
hartleymartin
Posts: 5153
Joined: Thu Feb 19, 2009 6:56 pm
Location: Fairfield, NSW

Re: My first fixie - Project MBK SS

Postby hartleymartin » Thu Feb 11, 2010 11:11 am

Chances are you're going to have to replace the crankset. 10-speed bicycles mostly came with one of the three following combinations: 42/52 - 40/52 - 40/48. Very occasionally you might see a 36/48.

The closest fitting chainrings to suit that 60mm radius would be either 122mm or 118mm (from Sheldon's website), the former is the obsolete Stronglight 93, and the latter is Ofmega, SR - also obsolete.
Martin Christopher Hartley

http://raleightwenty.webs.com - the top web resource for the Raleigh Twenty

User avatar
Verbs & Nouns
Posts: 778
Joined: Wed Jul 23, 2008 9:13 am
Location: Australia, South

Re: My first fixie - Project MBK SS

Postby Verbs & Nouns » Thu Feb 11, 2010 4:49 pm

To measure the bolt circle diameter (BCD), try this link.

http://www.sheldonbrown.com/gloss_bo-z.html
Ten Grand wrote:Goddamnit baby, this is soul... What's wrong with you?

User avatar
dodgiebros
Posts: 294
Joined: Tue Jan 26, 2010 5:51 am
Location: Penriff NSW

Re: My first fixie - Project MBK SS

Postby dodgiebros » Thu Feb 11, 2010 10:05 pm

thanks for tips Marty and Verbs :wink: looks like I have 122mm BCD (obsolete :( ) so
I reckon it's gonna stay the way it is :mrgreen:

;Heners
Posts: 11
Joined: Thu Feb 25, 2010 12:58 pm
Location: Daglish, Perth.

Re: My first fixie - Project MBK SS

Postby ;Heners » Thu Feb 25, 2010 9:01 pm

Looking really good mate, maybe try a different crank ?
It's a thing called a fixieee; and I'm telling you why.

Who is online

Users browsing this forum: No registered users