DISC BRAKE HELP
-
- Posts: 15
- Joined: Wed Sep 26, 2007 3:42 pm
- Location: Caulfield,Melbourne
DISC BRAKE HELP
Postby croat4ever » Tue Oct 02, 2007 10:49 am
i got the TEKTRO brake system on my bike and i was just wandering is it normal if i cant get my back brakes to lock up?Also why would that be the case if i cant lock them up if it isnt normal...?
Thanks
Hope to hear your responses
- Bnej
- Posts: 2880
- Joined: Fri Jun 30, 2006 11:43 pm
- Location: Katoomba, NSW
Postby Bnej » Tue Oct 02, 2007 11:24 am
With cable disc brakes, you need to wind the inside pad out so it is only just clear of the rotor, then adjust the outside pad and cable tension so it is also just clear. When you pull the lever it should flex the rotor very slightly into the inside pad and further pull on the lever will grab the disc harder.
If you are not confident setting up your brakes yourself then take it to a bike shop and ask them to help you.
If you look around on the web you might be able to find a service manual for the brakes you have, which would show specifically which parts you need to adjust.
-
- Posts: 15
- Joined: Wed Sep 26, 2007 3:42 pm
- Location: Caulfield,Melbourne
Postby croat4ever » Tue Oct 02, 2007 11:30 am
- Mulger bill
- Super Mod
- Posts: 29060
- Joined: Sun Sep 24, 2006 2:41 pm
- Location: Sunbury Vic
Postby Mulger bill » Tue Oct 02, 2007 11:30 am
I'm pretty sure you run cable discs, it sounds like it could be a cable stretch issue.
Your bike is still very new, maybe try the dealer?
If you want to do it yourself...
First up you should be able to download a manual that'll show you what's what, then check out sheldonbrown.com or park tools.com for lots of handy maintenance tips. Have a go and let us know.
Shaun
London Boy 29/12/2011
- Bnej
- Posts: 2880
- Joined: Fri Jun 30, 2006 11:43 pm
- Location: Katoomba, NSW
Postby Bnej » Tue Oct 02, 2007 12:13 pm
It's not weather you can stop in normal circumstances or flat ground, it's when you're on a downhill and you find yourself still picking up speed with the lever pulled all the way to the bar. If you can pull the lever all the way to the bar, then it's not braking as hard as it could be.croat4ever wrote:liek i can stop in time,like straight away but they are just not locking up and i have adjusted the lever....
If you're on road you mainly need the front brake, off road you definitely need both.
If you look at the rotor when you put the rear brake on, does it move much before it contacts the inner pad?
-
- Posts: 15
- Joined: Wed Sep 26, 2007 3:42 pm
- Location: Caulfield,Melbourne
Postby croat4ever » Tue Oct 02, 2007 1:05 pm
- Bnej
- Posts: 2880
- Joined: Fri Jun 30, 2006 11:43 pm
- Location: Katoomba, NSW
- Kalgrm
- Super Mod
- Posts: 9653
- Joined: Fri May 25, 2007 5:21 pm
- Location: Success, WA
- Contact:
Postby Kalgrm » Tue Oct 02, 2007 1:51 pm
Can you describe exactly what happens when you pull the lever? Does it go all the way to the bar? Does it come up solid but still not lock up? If it doesn't lock, they are not set up properly: there is no escape from that fact.
It could be oil on the brakes as Bnej said (good call Bnej), but it could also be a "feature" of Tecktro levers - they have a system where the amount of cable movement when you squeeze the levers can be varied. If you have a little knob on the levers it could be that you have the pull set inappropriately and it needs adjusting there. If you can post a pic of your lever and your callipers it might help us help you.
MountGower, he would also need a new wheel-set to fit V brakes (disc rims don't have a braking surface) and he may not have the V-brake lugs on the frame and forks. Maybe it's also just as good to have discs and know how to use them .....
Cheers,
Graeme
---------------------
Music was better when ugly people were allowed to make it ....
-
- Posts: 15
- Joined: Wed Sep 26, 2007 3:42 pm
- Location: Caulfield,Melbourne
Postby croat4ever » Tue Oct 02, 2007 2:23 pm
when i tried to skid on the grass the brakes sort of skidded liek it was just grabbing...if that helps...whether the bike shop put some lub o nit and it just has to settle in but i am not sure i will get some pics up now....
- Bnej
- Posts: 2880
- Joined: Fri Jun 30, 2006 11:43 pm
- Location: Katoomba, NSW
Postby Bnej » Tue Oct 02, 2007 2:28 pm
There are plenty of advantages to disc brakes. Some are indeed more fiddly, but not that much more. When they're properly set up you get a nice light touch, easily modulated braking action. They can get hotter without degrading performance as much, and you can't puncture your tube by overheating your rim. The rotor is generally out of the crud more too.MountGower wrote:Time after time I see people with disc brakes too scared to use them, sliding through corners with their back wheel locked and the complete loss of steering that goes with them. Better to have V brakes and know how to use them than to have discs and be too scared to use them.
They are a constant maintenance hassle. As if virtually pulling the bike down, cleaning and reassembling it after a morning out isn't bad enough. How much more of a pain in the arse to have to worry about these things aswell.
That said, many bikes have poor quality disc brakes now just for the bling factor - Giant are especially guilty of this, as they don't make any bike above the entry level with V brakes.
-
- Posts: 15
- Joined: Wed Sep 26, 2007 3:42 pm
- Location: Caulfield,Melbourne
Postby croat4ever » Tue Oct 02, 2007 2:31 pm
- Kalgrm
- Super Mod
- Posts: 9653
- Joined: Fri May 25, 2007 5:21 pm
- Location: Success, WA
- Contact:
Postby Kalgrm » Tue Oct 02, 2007 2:32 pm
Cheers,
Graeme
---------------------
Music was better when ugly people were allowed to make it ....
- Kalgrm
- Super Mod
- Posts: 9653
- Joined: Fri May 25, 2007 5:21 pm
- Location: Success, WA
- Contact:
Postby Kalgrm » Tue Oct 02, 2007 2:34 pm
Email them to me and I'll sort it out for you: graeme.hird at gmail dot com. You do need a place to drop them on the net.croat4ever wrote:hw od oyu add photos???do oyu need to have oyur own ftp site??[/img]
---------------------
Music was better when ugly people were allowed to make it ....
-
- Posts: 15
- Joined: Wed Sep 26, 2007 3:42 pm
- Location: Caulfield,Melbourne
Postby croat4ever » Tue Oct 02, 2007 2:34 pm
- Kalgrm
- Super Mod
- Posts: 9653
- Joined: Fri May 25, 2007 5:21 pm
- Location: Success, WA
- Contact:
Postby Kalgrm » Tue Oct 02, 2007 2:56 pm
The levers aren't Tektro, so the knob I was referring to is not there. Can you send us a close-up of the gap between the pads and the rotor please? It might be hard to capture with your camera. When the callipers are set up properly, there should only be enough room for one or two sheets of paper to slip through the gap. If there is more than that, the LBS has not done the job properly.
What they may have done to satisfy your request is to wind the knob on the brake lever (1st photo) back so that it supplies lots of slack in the cable. If that's the case, it's an easy fix - just wind that knob back out until you're happy with the feel of the brakes. This may well be what they have done, since both the knobs controlling cable slack (on the lever and the calliper) are in the extreme slack position.
Cheers,
Graeme
---------------------
Music was better when ugly people were allowed to make it ....
-
- Posts: 15
- Joined: Wed Sep 26, 2007 3:42 pm
- Location: Caulfield,Melbourne
Postby croat4ever » Tue Oct 02, 2007 7:26 pm
- Mulger bill
- Super Mod
- Posts: 29060
- Joined: Sun Sep 24, 2006 2:41 pm
- Location: Sunbury Vic
Postby Mulger bill » Fri Oct 05, 2007 12:30 am
Shaun?
London Boy 29/12/2011
-
- Posts: 15
- Joined: Wed Sep 26, 2007 3:42 pm
- Location: Caulfield,Melbourne
Postby croat4ever » Fri Oct 05, 2007 12:41 am
thansk for askign anyways....
Return to “Buying a bike / parts”
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+11:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.