21 posts • Page 1 of 1
Without trying to start an argument, how do you define Steep and Rolling hills? I went out today up the old freeway across Mt Lofty and then across through Lenswood and Cudlee Creek to Campbelltown (Gorge Rd is very average by the way). Great ride and perfect weather despite remembering to bring a wind jacket, but now trying to update my ride type I hit the dilemma - steep or rolling?
I vote steep, because now I am sore so they must have been big hills.
For me a steep hill is one where I absolutely have to stand up to get up it. A rolling hill is one where I can sit on the saddle.
a steep hill is well, steep. maybe long. Rollings hills are easier to define: they're short enough so that you can power over them without necessarily changing down in gears, like the pitch and climb gradients above the Kangaroo Creek lookout on Gorge Road. In theory. Of course, string five or six of them together and the way of getting over them changes somewhat.
I would define Tiers Road - climbing to Lenswood from the South as mofo steep.
Rolling hills aren't considered to be climbs. They are short and can be powered over quickly. But it's the repetitive ups and downs that'll sag one's legs.
Steep hill to me is anything 10% and over. Ones that'll really put the huffs and puffs in. But as for a hill, it can be powered over quickly.
Bianchi, Ridley, Montague, GT, Garmin and All things Apple
or turn left on the way up the Gorge once you are past the dam - Torrens Hill Rd. Unlike the Corkscrew, this road just goes straight up the side of the hill (ie no switchbacks). The corkscrew is probably a steeper gradient but I don't know for sure...but I know Torrens Hill Rd hurts!
2011 S-Works Tarmac
2013 Specialized Carve Pro 29er
1996 Giant ATX 890 MTB
I would consider the ride rolling more than steep, as whilst a lot of the hills are longer than what others describe as "rolling", they aren't steep. They are sods though and would test the legs, but aren't steep over any appreciable distance.
Greenhill Rd is an average of about 7%, and Eagle on the Hill to Mt Lofty is about 6.5%. I think Corkscrew is a tad over 10%, and Fox Creek Rd (the steep bit) was 10.5% avg.
Sounds like a nice ride though.
rusty chisel tiers road aint that steep try stentiford rd out the back of lenswood turn right at the rainwater tank on swamp road now thats steep 16+% in parts according to map my ride. thats a b?*&h i can hardly ride up that
White, Orbea Aspin, 2009
Red, Pinarello Sestriere, 2000
Trek 1500 ultegra gear, 2005
given the choice, would you rather share the roads with a woman texting in her four-wheel-drive, a manic truckie, a boy in a grey-import turbo, or a cyclist?
Map My Ride's gradients cannot be relied upon as the base data is overextended in being used in this way.
here is my data from my ride up Fox Creek and then onto Stentiford Rd logged with a Garmin 705.
The steep bit of Fox Creek begins at the start of the highlighted section (14.76km into the ride) and the gradient peaks at around the 12% then down hill and then the big climb up Stentiford Rd, where the gradient peaks marginally less, but goes on a little longer.
I do not consider these to be rolling hills. I even get out of the big chainring for them.
In my opinion, Fox Creek rd has nothing on corkscrew. It could be that corkscrew is longer or has a steepish buildup, but fox creek during the TDU was resonably easy. Yeah I was blowing, but nothing to severe by any means.
Oh and Im no mountain goat either
Those graphs are pretty cool as well
Whats the starting point for the ride on the chart Clydesdale? Assume you come along Fox Creek Rd / Coldstore then through Lenswood onto Swamp Rd?
How do you read the Garmin output - for example, from the 15km to 20km mark what is the gradient (the grade scale on the right is throwing me with the negative numbers, so it looks like the climb is a 14% one). Agree that the graphs look pretty cool.
I am not sure why it is, but the hardest part of all of the climbs was the first 1km or so at the start of Cross Rd and Freeway (may be riding up Cross Rd before hand?). Everything else I can handle but for whatever reason the path hits me like a punch in the head, then by the boarding kennel I am ok.
Corkscrew Rd is much steeper than Fox Creek.
the start has been thrown out as I have previously split the ride up into various sections for closer analysis (it was a training ride prior to the 2010 TDU Challenge ride)
The start for this leg was the drink stop near the Kangaroo Creek dam.
the grade scale has negative numbers for when you go downhill, and the steepest section is around the 13% grade
the data available with the Garmin is excellent, and coupled with SportsTracks software it allows for a good post ride examination of the ride.
For my hill work I pace myself using my HR, and after 5 years of HR monitors I know what I can do and for how long.
Like all online mapping tools, the MapMyRide data uses a 90 metre grid extrapolated, which is rubbish when the terrain is steep and variable.
Really ? Going on the averages for the total climb and distance travelled, the overall average % is similar. But Corkscrew Rd is longer ?
The Fox Creek climb is a bees gnat over 1km in length, but not sure how long Corkscrew is. Haven't been up there yet, but in my lighter state with a bit more fitness, may make it up there
If you don't consider youyrself a mountain goat, and seemingly 'just' get out of the big chainring , then I must be a major lardass, because I couldn't even contemplate getting near those hills without the 36T front
Chapeau to you
fox creek road is waaaaay easier than corkscrew
corkscrew road i feel like i want to stop pretty much the whole way up
if i get killed while out on my bike i dont want a 'memorial ride' by random punters i have never met.
A rolling hill is when you are hurting but I am fine (or covering the pain well).
A steep hill is when I am hurting.
When you are fine and I am hurting, it is 'overtraining' or 'stomach flu'.
05 Azzuri Primo (bought in 08)
10 BMC Team Machine
+1. Id gladly do fox creek 2 or 3 times to corkscrew once. Really like to see it in the TDU
hangs head in shame:
the reason why you don't see a graph from me for the Corkscrew is that I only ride down it. I can ride up Fox Creek, but I walk up Corkscrew!
The Corkscrew has some very steep switchbacks, so average gradients mask the cruelty of that one.
The Clydesdale is a reference to my weight.
no hard bit, head from the Cudlee Creek direction [click on map for route and elevation profile]. The ride up Gorge Rd will have you warmed up ready for the climbs
Is there a generally held perception that going in one direction is more difficult? For example, I go up the old freeway path to Mount Lofty then across Greenhill rd / deviation rd to cudlee creek and down gorge rd to campbelltown and then the city. If I went the reverse direction, is it harder climbing or about the same?
21 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users