open topic, for anything cycling related.
My morning ride was severley cut short this AM after riding over a sizable rock and ripping a large hole through the sidewall of my newish Continental Gatorskin rear tire.
I though I had enough light power with my current cheapie light to see these details on the track in the dark but, was clearly not enough.
Another $70 tire was bought today and I am now in the market for another, better light.
So, I am wanting a light that illuminates the night light of the track so much that I can see every little bit of crap on the track - just like daytime.
Give me the good oil on what type of lights that would help achieve my aim.
I think you need to learn about such shops as Wiggle CRC etc etc where said tyre is $34
Masi Speciale CX 2008 - Brooks B17 special saddle, Garmin Edge 810
Yes, I use CRC frequently and have spent over $2k with them so far and also well aware that the said tire is $34 at CRC or Wiggle, etc..
So, yes I am aware of the huge cost savings on offer when shopping online.
I did not have a spare tire, and will not wait 2 weeks before I receive another tire from OS (and stop riding while I wait).
So, I am happy to fork out the extra $40 for this tire to get me back riding right now.
I will be ordering 5 new tires from CRC tomorrow, along with some more goodies....
If your ordering from crc have a look at exposure lights. Very good build quality. Reliable, weather-proof and bright as you like (up to 1800 lumen). They also clip on and off from a very sturdy bracket; no cables, no batteries. Been running the 'toro' on and off road for over a year now and am very happy with it.
"A dessert without cheese is like a beautiful woman with only one eye."
Jean Anthelme Brillat-Savarin
Some days you are a big, strutting rooster, some days you are a bit chicken and some days you are just a complete cocque. Roger Ramjet: 2009 Giant CRX3 Spockette: 2009 Trek FX 7.3 (WSD, property of Mrs Monsoon) Lady Penelope: 2011 Avanti Cadent 1.0 TdF
I second this. Been using the Diablo for over a year. Bright, light, and the three power settings give the right amount of flexibility.
I've been looking into getting lights and out of all options the Exposure Lights are coming out as the best option, although I'm yet to decide.
The earlier post about buying from Deal Extreme as they are cheap has been discussed on other threads and I believe they are cheap for a reason. From what I read they run extremely hot, don't always comply with Aus standards and often stop working after a year or so...I have never owned one so I can only pass on what I have been told but it does raise some questions about the quality and trustworthiness/safety of chargers and the old adage that 'if its too good to be true' etc etc.
Everyone is different and I has different needs but I've looked at many types and the Exposure Lights seem to suit me because they are easily removed, minimal hassle, bright, well made with a good warranty and from what I hear, work very well! Price wise they compare to all the other big names like Ay Up, Dinotte, Nitelights etc
Never underestimate the power of ignorance
I don't want to sound like a cracked record, but I can personally recommend Exposure lights as I've been using them for over 4 years now. I've upgraded once, but not due to finding the previous model inadequate. (upgradeitus)
The little Joystick is enough for road use & makes a great helmet light coupled with their larger bar mounted light for MTB use. Their new "6 pack" looks a bit too much light at a claimed 1800 lumens, but I'm tempted even though I find my 720 lumen triple led quite sufficient.
Gas propulsion.......it's natural don't fight it.
I'm sure I mentioned something about getting a decent light about 3 months ago ...
I've been using the Exposure Lights Strada and very pleased with it. The new model (Strada II) is 600 lumens so not over the top but more than enough to illuminate the road and paths. Dual beam gives you good spread and depth of light. The flashing mode is very good since the light stays on and pulses unlike other lights which flick between on and off. A few people I know have purchases thsi light on my recommendation and they are very happ with it.
I've got the same bars on my roadie.
If your stem has a normal sized clamping area, there should be enough round bar either side of the stem to mount your lights. I have speedo on one side, light on the other. Its extremely unlikely that it will mount in the middle of the shaped area.
This is about the 5th dig you've had at me about my decision process for buying lights. Not sure Say What your problem is but I wish it would just go away...
On a different note...CRC seems to have Exposure lights at good prices (I'd prefer to buy from an Aussie supplier if its not massively more expensive) but I'd like to know where are people buying theirs from?
Never underestimate the power of ignorance
I thought we had enough threads about bike lights already so instead of starting another I thought iwould just add my question to this thread. Why are bike lights generally LEDs and measured in Lumens where automotive lights are generally a quartz halogen bulb and measured in watts? it would seem that the bike ones are more high-tech with brands like AYUP putting out very bright lights.
Leds produce more light per watt than halogen, its a better sales tool to describe the light instead of the watts.
When bicycle lights were mostly halogen (the set I bought 6 years ago was halogen/nimh batteries), manufacturers usually described them by the watts they dissipated.
That's because Quartz halogen technology is now very generic and most brands will output similar levels for an accepted wattage consumption. Lumens = output, Watts = energy consumption.
With LEDs we are seeing rapid advances, for instance the standard LEDs that came in the Ay-Ups I had were I think 400mA current draw (energy consumption) for a stated output. I've since replaced them with Power LEDs which have the same current draw yet are 4 times brighter (ie 4 x Lumens), so we need to consider the the energy consumption along with brightness to make any comparisons. I used one of the left over Ay-Up LEDs in my Basta Egg White front light, so it dropped in power consumption but jumped in light output, a brighter light that last 3 times longer.
I could agree with you, but then we would both be wrong.
Same wattage, much greater lumens. Both powered by the same 6V3W dynamo. Technology is a-changing, and rapidly.
Riding bikes in traffic - what seems dangerous is usually safe; what seems safe is often more dangerous.
Let me see...you started a light thread when there were heaps already on the forum. The people here were helpful enough so you got responses to that on your thread. Yet here you are still posting on someone else's light thread stating you still can't decide. No one else is going to decide but you over your light dilemma. How many more posts and responses do you require? CRC has light reviews too. The web has plenty of light reviews.
In short, just buy some freaking lights man. And it would be good if lighting threads can be stemmed. How many lighting threads does this forum need per day?
Amateur oenologist and green-friendly commuter.
Who is online