Workshop tales, trials and disasters.
Maintenance tips, techniques and myths.
Technical discussion, description and outright lies
7 posts • Page 1 of 1
ok then i have an ocr with sora gearing on it i was just wondering how u move the frount deralier. I can only use 1 to 5 gears on the middle frount cog. Its really enoying when I have to change up to the big frount cog for a little bit then change back to the middle cog. I have tried before and it didnt make muchof a difference. So dou have the trun the bolts one deralier much??? the rear deralier is easy to do i can do that one fine
Can't be well explained by a few lines in a forum. Check out Park Tool's instructions.
Bianchi, Ridley, Montague, GT, Garmin and All things Apple
Edit: Oops - too slow .....
Try the Park Tools site: lots of useful info on how to adjust your derailleurs (F & R)
Think outside the double triangle.
Music was better when ugly people were allowed to make it ....
I have found Sheldon Browns site to be very useful as well,
Gear adjustment is one of those things which seem like a black art before you learn how, but once learned, is not that hard usually. Hope it all helps unko.
Merida Scultura 904
Bianchi C2C Via Nirone
Specialized Hard Rock
Actually - that's quite normal - you shouldn't be able to go from biggest cog to smallest cog on the cassette in one fell swoop without changing on the chainrings - the chain isn't meant to bend through the extreme angles - if you are you're harming your drivetrain..... that grinding noise as the chain rubs on the dÃ©railleurs and chainring teeth is actually bad and means change gears.
I find on the small chainring (your middle) I can go through the top 5 cogs on the cassette - then it's up to the big chainring, and back up one or two on the casette to be back in a similar ratio with further to go.
That said, adjusting the front dÃ©railleur isn't difficult.
What is it with cycling? 30+ kmh and lycra???!!!
If you have a triple on the front you shoudl be able to get 2 thru 9 or 1 thru 8 no problems from the middle front chainring on a 9-speed rear transmission.
7 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users