Hi guys
I'm extremely new to this game, but highly interested and keen to build my own mens fixed gear. I just went to my local recycling depot and found a Graecross 'Courier' but i don't have much of an idea on what a good frame is. I was wondering if anyone could enlighten me on this bicycle and give me some direction on whether i should pay the $10 to buy the bike and get tinkering or just keep digging around.
I do have a photo of it but a little unsure on how to upload it ????
Graecross 'Courier'
-
- Posts: 5
- Joined: Wed Jul 20, 2011 4:56 pm
- scrubnbash
- Posts: 36
- Joined: Tue Apr 12, 2011 8:26 pm
- Location: Brisbane
Re: Graecross 'Courier'
Postby scrubnbash » Fri Jul 22, 2011 5:16 pm
By the looks of things that kind of bike is fine for a fixie conversion. Make sure it fits you first.
Things to be wary of:
The frame will probably take 27" wheels. Modern wheels are 700c (8 mm smaller in diameter), with a few fairly cost prohibitive exceptions. Result = if you put modern wheels on the frame then modern brake calipers are unlikely to reach the rim. This can be got around if you don't mid using the brake calipers that are already on the bike, they'll usually reach - you just wont stop terribly well. Or you can get long reach brake (not all of them will reach). Or you can make a drop bolt > http://www.bikesmoveus.com.au/showthread.php?t=4557, then you can mount whatever brake you want.
It's likely to have a older / cheaper style crankset. The largest chainring will be permanently attached to the drive-side crank. This isn't a terribly bad thing just means you may have to buy a huge rear sprocket to lower the gear. Or buy a new / different crankset.
Things to be wary of:
The frame will probably take 27" wheels. Modern wheels are 700c (8 mm smaller in diameter), with a few fairly cost prohibitive exceptions. Result = if you put modern wheels on the frame then modern brake calipers are unlikely to reach the rim. This can be got around if you don't mid using the brake calipers that are already on the bike, they'll usually reach - you just wont stop terribly well. Or you can get long reach brake (not all of them will reach). Or you can make a drop bolt > http://www.bikesmoveus.com.au/showthread.php?t=4557, then you can mount whatever brake you want.
It's likely to have a older / cheaper style crankset. The largest chainring will be permanently attached to the drive-side crank. This isn't a terribly bad thing just means you may have to buy a huge rear sprocket to lower the gear. Or buy a new / different crankset.
- Mugglechops
- Posts: 3037
- Joined: Mon Jan 10, 2011 6:51 pm
- Location: Wagga
Re: Graecross 'Courier'
Postby Mugglechops » Fri Jul 22, 2011 7:16 pm
That was the first bike I ever bought with my own money. From memory it had 27inch wheels and a Hi-tensile steel frame. For $10 you can't go wrong, I did 2 Great Victorian Bike Rides on mine.
-
- Posts: 5
- Joined: Wed Jul 20, 2011 4:56 pm
Re: Graecross 'Courier'
Postby Tozzie » Sat Jul 23, 2011 1:21 pm
Thankyou for your help..
I've heard this frame is made from Hi Tensile steel...but is this a good thing or bad thing? by the sounds of things everyone wants a light bike? for me personally i'd only be cruising ...using my bike to ride a 10km return trip to my local shops and its all flat cycle way so no need for speed..
I'm thinking the plan would be to buy a set of 700c and a new crank set. and then once i discover more about this new hobby i can upgrade my frame..
I also saw an apollo 2 bike at the local recycling depot.. would this be a better frame?
how do i measure a frame to my body size with out pulling out a tape measure? does it have to reach a certain point on my body?
I'm sorry for all the crappy questions but i'm from a small coastal town and no one knows much about bicycles here, but i'm interested in tinkering.
I've heard this frame is made from Hi Tensile steel...but is this a good thing or bad thing? by the sounds of things everyone wants a light bike? for me personally i'd only be cruising ...using my bike to ride a 10km return trip to my local shops and its all flat cycle way so no need for speed..
I'm thinking the plan would be to buy a set of 700c and a new crank set. and then once i discover more about this new hobby i can upgrade my frame..
I also saw an apollo 2 bike at the local recycling depot.. would this be a better frame?
how do i measure a frame to my body size with out pulling out a tape measure? does it have to reach a certain point on my body?
I'm sorry for all the crappy questions but i'm from a small coastal town and no one knows much about bicycles here, but i'm interested in tinkering.
- hartleymartin
- Posts: 5153
- Joined: Thu Feb 19, 2009 6:56 pm
- Location: Fairfield, NSW
Re: Graecross 'Courier'
Postby hartleymartin » Sat Jul 23, 2011 1:59 pm
All other things equal, the frame weight doesn't make a huge difference. You'll make greater weight savings with quality wheels, alloy stem, alloy seat-post, etc. Don't get sucked into the weight fetish.
Martin Christopher Hartley
http://raleightwenty.webs.com - the top web resource for the Raleigh Twenty
http://raleightwenty.webs.com - the top web resource for the Raleigh Twenty
- scrubnbash
- Posts: 36
- Joined: Tue Apr 12, 2011 8:26 pm
- Location: Brisbane
Re: Graecross 'Courier'
Postby scrubnbash » Sat Jul 23, 2011 6:10 pm
Couldn't find much about apollo 2s. The few pics I found had forged rather than stamped drops - usually a good sign.
I have a fixie that's a high ten repco traveller and a 12 speed that's nicer italian columbus steel. They end up weighing about the same because of all the extra running gear on the 12 speed. For single speeds weight doesn't seem to be a big deal.
I have a fixie that's a high ten repco traveller and a 12 speed that's nicer italian columbus steel. They end up weighing about the same because of all the extra running gear on the 12 speed. For single speeds weight doesn't seem to be a big deal.
-
- Moderator
- Posts: 1265
- Joined: Wed Sep 16, 2009 9:07 am
- Location: Toongabbie NSW
- Contact:
Re: Graecross 'Courier'
Postby thomashouseman » Sat Jul 23, 2011 8:14 pm
I've an Apollo II. Done at least 100000Km's on it in the last 23 years. Replaced everything on the frame, sometimes several times but the frame's still going strong!
Sent from my Stream using Tapatalk
Sent from my Stream using Tapatalk
- vaeske
- Posts: 1013
- Joined: Thu May 05, 2011 9:22 am
- Location: Brisbane
- Contact:
Re: Graecross 'Courier'
Postby vaeske » Wed Aug 10, 2011 3:28 pm
i'm actually thinking of restoring my graecross courier as it has the bolts on the down tube for gear changing. still. doesn't look too shabby at all after a powdercoat!
Return to “Fixed Gear/ Single Speed”
Jump to
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+10:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
Brought to you by Bicycles Network Australia | © 1999 - 2024 | Powered by phpBB ®
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.