Spoke length

For Roadies

Spoke length

Postby md » Mon Sep 05, 2011 6:58 am

Hi all,
I have a set of DA 7800 hubs I am putting to a set of wheels.
Being 16H front I am using a Ritchey WCS Deep Section front rim and a 20H DT Swiss RR585 for the rear.
I plan on using brass with double butted spokes...but what I dont know is spoke length.
I still have the original DA spokes but no idea whether they are suitable. Anyone got any clues?
Cheers
Michael
md
 
Posts: 3
Joined: Mon Sep 05, 2011 6:52 am

by BNA » Tue Sep 06, 2011 6:59 am

BNA
 

Re: Spoke length

Postby Oldbikerider » Tue Sep 06, 2011 6:59 am

Michael,

The DT Swiss website has a spoke calculator tool. There is a help file which explains how to use it.

Also, Sheldon Brown's site links to some more spoke calculator tools.

Graham.
Oldbikerider
 
Posts: 5
Joined: Mon Feb 16, 2009 7:45 am
Location: Sydney

Re: Spoke length

Postby Crawf » Tue Sep 06, 2011 8:26 pm

Get the hub specs along with the rim specs and simply enter them into a spokecalc... then check all the measurements again.
If your original spokes are greater than 1mm than what the spokecalc recommends, then it is not recommended to use them.

http://www.wheelpro.co.uk/spokecalc/
Crawf
 
Posts: 1687
Joined: Wed Jan 09, 2008 8:20 pm

Re: Spoke length

Postby md » Wed Sep 07, 2011 11:42 am

Great, thanks for the help guys.
regards
Michael
md
 
Posts: 3
Joined: Mon Sep 05, 2011 6:52 am


Return to Road Biking

Who is online

Users browsing this forum: No registered users



Popular Bike Shops
Torpedo 7 Torpedo7 AU
Ground Effect Ground Effect NZ
Chain Reaction Cycles CRC UK
Wiggle Wiggle UK
Ebay Ebay AU

“Bicycles BNA Twitter
“Bicycles BNA Facebook
“Google+ BNA Google+
“Bicycles BNA Newsletter

> FREE BNA Stickers
> BNA Cycling Kit