Spoke length

For Roadies

Spoke length

Postby md » Mon Sep 05, 2011 6:58 am

Hi all,
I have a set of DA 7800 hubs I am putting to a set of wheels.
Being 16H front I am using a Ritchey WCS Deep Section front rim and a 20H DT Swiss RR585 for the rear.
I plan on using brass with double butted spokes...but what I dont know is spoke length.
I still have the original DA spokes but no idea whether they are suitable. Anyone got any clues?
Cheers
Michael
md
 
Posts: 3
Joined: Mon Sep 05, 2011 6:52 am

by BNA » Tue Sep 06, 2011 6:59 am

BNA
 

Re: Spoke length

Postby Oldbikerider » Tue Sep 06, 2011 6:59 am

Michael,

The DT Swiss website has a spoke calculator tool. There is a help file which explains how to use it.

Also, Sheldon Brown's site links to some more spoke calculator tools.

Graham.
Oldbikerider
 
Posts: 4
Joined: Mon Feb 16, 2009 7:45 am
Location: Sydney

Re: Spoke length

Postby Crawf » Tue Sep 06, 2011 8:26 pm

Get the hub specs along with the rim specs and simply enter them into a spokecalc... then check all the measurements again.
If your original spokes are greater than 1mm than what the spokecalc recommends, then it is not recommended to use them.

http://www.wheelpro.co.uk/spokecalc/
Crawf
 
Posts: 1599
Joined: Wed Jan 09, 2008 8:20 pm

Re: Spoke length

Postby md » Wed Sep 07, 2011 11:42 am

Great, thanks for the help guys.
regards
Michael
md
 
Posts: 3
Joined: Mon Sep 05, 2011 6:52 am


Return to Road Biking

Who is online

Users browsing this forum: you cannot be sirrus



Support BNA
Click for online shops
Torpedo 7 Torpedo7 AU
Ground Effect Ground Effect NZ
Chain Reaction Cycles CRC UK
Wiggle Wiggle UK
Cycling Express Cycling Express
Ebay Ebay AU
ProBikeKit ProBikeKit UK
Evans Cycles Evans Cycles UK
JensonUSA Jenson USA
JensonUSA Competitive Cyclist