Cadence....discuss
- mikesbytes
- Super Mod
- Posts: 22179
- Joined: Thu Dec 01, 2005 11:42 pm
- Location: Tempe, Sydney
- Contact:
Re: Cadence....discuss
Postby mikesbytes » Mon Oct 24, 2011 2:52 pm
- Wayfarer
- Posts: 1225
- Joined: Mon Jun 15, 2009 6:39 pm
- Location: SW Sydney
Re: Cadence....discuss
Postby Wayfarer » Mon Oct 24, 2011 4:12 pm
What a load of rubbish. Everybody knows that pedalling lower RPM gives you a lower breathing rate for the same output. It also doesn't once take into account the fact that, if you're spinning fast and redlining already then get to a big hill, you're not going to get up it without changing to a harder gear. Using 8 'experienced' cyclists, ie ones who already pedal a good 90RPM is a crap way to justify faster pedalling cadences is better. They already spin fast on the road, so their bodies aren't accustomed to mashing the pedals. By comparison, an Ironman or Ironwoman, like Chrissie Wellington or Mirinda Carfrae both use 60RPM cadence, more efficiently than 90RPM. Simply because they train that way. Great article from 1992 though.As it turned out, the athletes' oxygen consumption rates were nearly identical in the two cases, and heart and breathing rates, total rate of power production, and blood lactate levels were also similar.
- Alex Simmons/RST
- Expert
- Posts: 4997
- Joined: Fri May 02, 2008 3:51 pm
- Contact:
Re: Cadence....discuss
Postby Alex Simmons/RST » Mon Oct 24, 2011 5:39 pm
To be fair though, the study was using riders doing a 30-min effort at 85% of VO2max (which is quite hard riding), far harder than an IM athlete would ride.Wayfarer wrote:What a load of rubbish. Everybody knows that pedalling lower RPM gives you a lower breathing rate for the same output. It also doesn't once take into account the fact that, if you're spinning fast and redlining already then get to a big hill, you're not going to get up it without changing to a harder gear. Using 8 'experienced' cyclists, ie ones who already pedal a good 90RPM is a crap way to justify faster pedalling cadences is better. They already spin fast on the road, so their bodies aren't accustomed to mashing the pedals. By comparison, an Ironman or Ironwoman, like Chrissie Wellington or Mirinda Carfrae both use 60RPM cadence, more efficiently than 90RPM. Simply because they train that way. Great article from 1992 though.As it turned out, the athletes' oxygen consumption rates were nearly identical in the two cases, and heart and breathing rates, total rate of power production, and blood lactate levels were also similar.
The lower cadences don't have the same impact when riding at the much lower relative intensities that an IM athlete would use.
Pointing out one or two IM riders doesn't prove anything much. I think you will find a fair spread of cadences in successful IM athletes.
The faster athletes simply pace better, fuel better and have a higher power to aero drag ratio. Their cadence is a red herring.
- mikesbytes
- Super Mod
- Posts: 22179
- Joined: Thu Dec 01, 2005 11:42 pm
- Location: Tempe, Sydney
- Contact:
Re: Cadence....discuss
Postby mikesbytes » Mon Oct 24, 2011 10:17 pm
- Apple
- Posts: 3513
- Joined: Sun Apr 11, 2010 4:00 pm
- Location: sydney
Re: Cadence....discuss
Postby Apple » Mon Oct 24, 2011 10:55 pm
Thats a great article Mike, thanks. I tend to use low cadence on the big gear but I am now training myself to increase the cadence when climbing.
Speak your mind,Those that mind dont matter, Those that matter dont mind!!
-
- Posts: 9810
- Joined: Tue Dec 01, 2009 11:48 am
Re: Cadence....discuss
Postby human909 » Tue Nov 29, 2011 11:58 pm
A good article. And points out what I was arguing at the start of this thread that higher cadences are not about fast twitch muscles, in fact it normally is the opposite. This was despite some people's stubborn refusal to believe otherwise.
brentono wrote:
So to sum up, have talked about pedalers, those who have high ratios of fast-twitch fibers, who can more
easily attain higher cadence levels. Then there are those that have higher ratios of slow-twitch fibers and
are more comfortable with lower cadence, higher gears, and endurance events (sluggers as we used to call them)
- brentono
- Posts: 3698
- Joined: Mon Jul 13, 2009 12:33 pm
- Location: Perth DubyaEh.
Re: Cadence....discuss
Postby brentono » Wed Nov 30, 2011 12:49 pm
it's limited regarding actual competative cycling.
And it would seem, he resents someone who does have actual experience. (by constant personal attack)
Great point
Exactly what I had been saying ALL along.Slow-twitch muscle cells lost comparable amounts of their glycogen at 50 and 100 rpm, but fast-twitch cells lost almost 50 percent of their glycogen at 50 rpm and only 33 percent at 100 rpm, even though the exercise bouts lasted for 30 minutes in each case.
A Track rider (with higher F/T muscle ratio to S/T) who is a good pedaler,
and maintains higher cadence, in competiton (by using lower gears) conserves energy,
thereby having reserves, at the business end of any competition.
Thanks mikesbytes = Article on Cadence
- twizzle
- Posts: 6402
- Joined: Wed Aug 13, 2008 11:45 am
- Location: Highlands of Wales.
Re: Cadence....discuss
Postby twizzle » Wed Nov 30, 2011 12:58 pm
The caveat there is that you have to be using low force, ie. not recruiting fast-twitch muscles, at low cadence. When 'cruising' in a race, I will drop to a cadence of around 60 for energy conservation - although it can be a big disadvantage when there is a sudden attack. But I have stuff-all fast twitch anyway, and if I maintain 'high' cadence (ie. 90 - 100), my heart rate increases.brentono wrote:in competiton (by using lower gears) conserves energy
...real cyclists don't have squeaky chains...
- brentono
- Posts: 3698
- Joined: Mon Jul 13, 2009 12:33 pm
- Location: Perth DubyaEh.
Re: Cadence....discuss
Postby brentono » Wed Nov 30, 2011 1:28 pm
Having been a Track sprinter, I personally found in longer more endurance events on the track,Ultimately, the high pedaling rates also preserve greater amounts of glycogen
in fast-twitch muscle fibers, leading to more explosive "kicks" to the finish line
in closing moments of races.
and in Road Events up to even 160Km, if I maintained higher cadence, I did conserve "energy"
and even survived (didn't blow up, in road events)... to then be able muster a victorius sprint
with an explosive "kick" to the finish line in closing moments of races.
We all have both types of muscle fibres, in different ratios (due to heredity or training methods)
How you develop these types of muscle fibres, will determine what type of rider you become. FME.
And if anone wishes to go over the training methods that I have explained to achieve this,
then I wish them success, they will find the results are well worth the training effort.
Cheers
- mikesbytes
- Super Mod
- Posts: 22179
- Joined: Thu Dec 01, 2005 11:42 pm
- Location: Tempe, Sydney
- Contact:
Re: Cadence....discuss
Postby mikesbytes » Wed Nov 30, 2011 1:40 pm
However there's the case of what's relevant to you
-
- Posts: 9810
- Joined: Tue Dec 01, 2009 11:48 am
Re: Cadence....discuss
Postby human909 » Wed Nov 30, 2011 9:19 pm
High/low cadence is relative and can vary from person to person. Furthermore cadence is actually not the most relevant metric. The most relevant metric the leg force as that is the determining factor on whether the muscle contraction is dominated by fast twitch or slow twitch muscles. However cadence is used as the easily measurable proxy as for a give power level it is inversely proportional to leg force.mikesbytes wrote:I'm a bit puzzled by the definition of high cadence, some of the figures quoted as high is what I see as low.
The to sustained performance is using your slow twitch muscles. At lower power levels a low cadence can suffice. That is why most utility and recreational cyclists cruise at lower cadences. At higher power levels you really need to up your cadence to avoid needing too much of your fast twitch. Thus at higher sustained power levels you need a higher cadence. At peak power you can go into oxygen debt and produce power aerobically, so bring on those fast twitch!
Yet the article totally contradicts what you previously said? Or have you now changed your stance?brentono wrote:Ignoring H909, as it seems, whatever knowledge he has?
it's limited regarding actual competative cycling.
And it would seem, he resents someone who does have actual experience. (by constant personal attack)
Re personal attacks, I think you should read your own posts. And suggesting I resent you is the height of conceitedness. I ride for pleasure and transport and I have done since I was a child. Not every cyclist aspires to compete, in the same way no every drive aspires to drive in the F1.
If you want to know the intricate details the thermodynamics of an F1 car you ask an race engineer rather than the driver. In the same way if I wanted to understand the biomechanics of cycling I would rather consult a bio-mechanist rather than a competitive cyclist.
- Alex Simmons/RST
- Expert
- Posts: 4997
- Joined: Fri May 02, 2008 3:51 pm
- Contact:
Re: Cadence....discuss
Postby Alex Simmons/RST » Wed Nov 30, 2011 9:50 pm
Henneman's Size Principle: As demand increases, the number and size of motor units recruited increases. Slow twitch fibres are smaller than fast twitch fibres and will be preferentially activated at lower power demand.
Fibres are recruited in sequence depending on the intensity of the work performed. I > IIa > IIx.
Individual theories about saving legs by spinning faster or slowing down cadence etc is all very nice but reality is, it's the power /exertion level that determines motor unit recruitment and how well one saves their legs. In a group ride scenario (to conserve energy) you simply have to learn how to draft effectively and avoid surging as much as possible.
Increased cadence reduces forces a little but comes at a slightly higher metabolic cost (slightly reduced efficiency). End of the day, it's swings and roundabouts at the typical band of cadences one rides in road racing, so riding however you find makes you feel good is all that matters, provided you draft well and avoid surging.
- ft_critical
- Posts: 2099
- Joined: Thu Jan 14, 2010 2:06 pm
- Location: watching the 11
- Contact:
Re: Cadence....discuss
Postby ft_critical » Wed Nov 30, 2011 9:59 pm
Some on the forum say cadence is the wrong metric, it is a red herring blah, blah. I am not training a metric I am training a perceived weakness.
I think that people who can spin faster are more efficient. This is my positive hypothesis.
Some of my results are that I can now spin at about 125-127rpm for 5min, where before I could do only one set at 118rpm. The effect of this is, I can climb faster. I can hold the spin pace (some refer to it as staying on top of the gear) on a hill much longer. I can spin a higher rpm at a lower HR (this was a big surprise and is what Brentono is referring to I think.) I can do those little in race sprints you do a million times to close gaps, change position etc with much greater ease. I perceive that I am conserving more at higher cadence than when I drive a higher gear at lower RPM. And there is no getting around it I am a masher. On the flats I can spin a circle. But when I got to a hill I reverted to a more up and down motion (stomping.) I would be isolating my quads. The more I can spin on a hill the more I can keep the distribution of effort even through my muscles, particularly my hamstrings.
So I am firmly in the cadence camp. Concentrating on higher cadence for a masher like me has significant benefits. I think a lot of people brought up on the track discount this because they achieve it naturally. As someone who picked up road riding later in life I don’t have the benefit of having ridden at high cadence week in week out. So I need some specific training to compensate for that and the relatively inefficient technique that resulted from not riding the track.
I have no belief that what I have written will help anyone nor be believed by anyone in this thread.
- foo on patrol
- Posts: 9057
- Joined: Sat Dec 19, 2009 11:12 am
- Location: Sanstone Point QLD
Re: Cadence....discuss
Postby foo on patrol » Wed Nov 30, 2011 10:12 pm
If you had noticed on any of the Tour commentary made by the likes of Phil Liggett he remarks on the riders freshness, by how fast
they are spinning.The more fatigued they get the smaller gear they ride so that means, if you want to ride a big gear, then you need to lift
the rpm level to a point so that you're not taxing yourself! Give me a rider that can spin all day long and up the anti at the end, to someone that sits
and grinds away and can't lift to a higher level when it counts.
Your logic might be fine for Joe Blow that only does 20Klm rides but sure as hell doesn't hold true for competive cyclists!
Foo
Goal 6000km
-
- Posts: 9810
- Joined: Tue Dec 01, 2009 11:48 am
Re: Cadence....discuss
Postby human909 » Wed Nov 30, 2011 11:18 pm
I agree with everything you said except I find this statement odd. Increased cadence reduces forces significantly (for a given power output). Infact the forces will drop exactly inversely proportionally to the cadence. This is an unavoidable physical fact.Alex Simmons/RST wrote:Increased cadence reduces forces a little.
I don't know what you think you read, but it is quite clear to me that you seem to be thinking something different. I agree with what you are saying there (except for the eye roll bit).foo on patrol wrote:Your logic might be fine for Joe Blow that only does 20Klm rides but sure as hell doesn't hold true for competive cyclists!
- Alex Simmons/RST
- Expert
- Posts: 4997
- Joined: Fri May 02, 2008 3:51 pm
- Contact:
Re: Cadence....discuss
Postby Alex Simmons/RST » Thu Dec 01, 2011 8:41 am
I'm not saying otherwise.human909 wrote:I agree with everything you said except I find this statement odd. Increased cadence reduces forces significantly (for a given power output). Infact the forces will drop exactly inversely proportionally to the cadence. This is an unavoidable physical fact.Alex Simmons/RST wrote:Increased cadence reduces forces a little.
But we are talking about people who decide to ride at say 100rpm instead of 92-95rpm while riding along at very modest power outputs. So we have a grand change in cadence (and forces) of a handful of percent, which at sub-threshold power outputs is neither here nor there (i.e. riding below/left of the threshold force-pedal speed curve). IOW, it's the power output one should be concerned with if you want to save yourself, not the cadence.
Pithy Power Proverb: Maximise the power you can produce. Minimise the power you have to produce.
-
- Posts: 10330
- Joined: Thu Sep 18, 2008 12:10 pm
- Location: Sydney
Re: Cadence....discuss
Postby Nobody » Thu Dec 01, 2011 9:24 am
OT, but since you mention it here:ft_critical wrote:On the flats I can spin a circle. But when I got to a hill I reverted to a more up and down motion (stomping.) I would be isolating my quads. The more I can spin on a hill the more I can keep the distribution of effort even through my muscles, particularly my hamstrings.
This may be of benefit to you (or not). Comparing the description in Steve's blog below about ideal saddle height with what you describe above on hills, your saddle may be too high. Just a thought.
http://www.stevehoggbikefitting.com/blo ... can-it-be/
- ft_critical
- Posts: 2099
- Joined: Thu Jan 14, 2010 2:06 pm
- Location: watching the 11
- Contact:
Re: Cadence....discuss
Postby ft_critical » Thu Dec 01, 2011 11:21 am
Thanks Nobody, been fitted by him in person.Nobody wrote:Comparing the description in Steve's blog below about ideal saddle height with what you describe above on hills, your saddle may be too high. Just a thought.
http://www.stevehoggbikefitting.com/blo ... can-it-be/
- brentono
- Posts: 3698
- Joined: Mon Jul 13, 2009 12:33 pm
- Location: Perth DubyaEh.
Re: Cadence....discuss
Postby brentono » Thu Dec 01, 2011 12:33 pm
Since this is the Training for Racing section, it is good to see a positive response
regarding the discussion on Cadence, and it's functional implementation (in any part)
Any points that I may have made about good pedalers, and those who can more
easily attain higher cadence levels, during any of my discussions on training methods
have not waivered. It is a function of the individuals training methods. Do as I did.
Ft_c it sounds like you may be at the beginning of a path, that,
with a lot of determined work, will make you a better pedaler, which will
make you a better cyclist, conserving "power" that in end, will help in any Sprint,
or finish of any cycling event... and will help you get to that end... if that's what your after.
Hills (hated them) were even overcome, by these methods, also!
All the best with your work.
Cheers
- ft_critical
- Posts: 2099
- Joined: Thu Jan 14, 2010 2:06 pm
- Location: watching the 11
- Contact:
Re: Cadence....discuss
Postby ft_critical » Thu Dec 01, 2011 1:06 pm
Hallelujah Brentonobrentono wrote:Ft_c it sounds like you may be at the beginning of a path, that,
with a lot of determined work, will make you a better pedaler, which will
make you a better cyclist, conserving "power" that in end, will help in any Sprint,
or finish of any cycling event... and will help you get to that end... if
Also I haven't been 909ed yet, which is good.
- mikesbytes
- Super Mod
- Posts: 22179
- Joined: Thu Dec 01, 2005 11:42 pm
- Location: Tempe, Sydney
- Contact:
Re: Cadence....discuss
Postby mikesbytes » Thu Dec 01, 2011 2:41 pm
-
- Posts: 9810
- Joined: Tue Dec 01, 2009 11:48 am
Re: Cadence....discuss
Postby human909 » Thu Dec 01, 2011 4:28 pm
Makes total sense.Alex Simmons/RST wrote:I'm not saying otherwise.
But we are talking about people who decide to ride at say 100rpm instead of 92-95rpm while riding along at very modest power outputs. So we have a grand change in cadence (and forces) of a handful of percent, which at sub-threshold power outputs is neither here nor there (i.e. riding below/left of the threshold force-pedal speed curve). IOW, it's the power output one should be concerned with if you want to save yourself, not the cadence.
Pithy Power Proverb: Maximise the power you can produce. Minimise the power you have to produce.
-
- Posts: 1346
- Joined: Thu Jul 28, 2011 12:35 am
- Location: Earlwood
- Contact:
Re: Cadence....discuss
Postby vander » Mon Dec 12, 2011 10:54 pm
The different with everything between 60-100RPM is minimal optimum zone is large (as has been mentioned before) its when you get ridiculous cadences like 40 and 140 that you start to get large differences in performance as its more inefficient. Increasing your power will improve your riding a lot more then increasing you cadence.
-
- Posts: 1252
- Joined: Tue Feb 16, 2010 7:53 am
- Location: Hobart
Re: Cadence....discuss
Postby BarryTas » Thu Dec 15, 2011 12:07 pm
- Marx
- Posts: 321
- Joined: Mon Jun 15, 2009 12:36 pm
- Location: Flemington Melbourne Australia
Re: Cadence....discuss
Postby Marx » Thu Dec 15, 2011 2:16 pm
Which is the best looking cadence?
High cadence looks funny as the legs are a blur & some people bop on their saddles.
Low cadence comes across as 'try-hard' unless you're inching up on Mark Cavendish when he's out of the saddle coming to the end of his ride.
Spinning on rollers looks & sounds alot like the kind of actiivty that would normally get you arrested.
For a real insight, talk to a hipster who rides a fixie. Your ensuing rage will result in doing us all a favour...
A bike and a place to ride.
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: bwdftp
- All times are UTC+10:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.