80's Chainwheels Compatable with 10sp Chains

Vintage, yesteryear and retro biking

80's Chainwheels Compatable with 10sp Chains

Postby GiantAnt » Fri Mar 21, 2008 4:47 pm

I have a couple of road bikes that are late 80's vintage and i am considering upgrading at least one with some newer components. They run 7 speed rear clusters. I am wondering whether the front chainrings (cranksets are Shimano 600 and Suntour Superbe Pro) will be compatable with 10 speed chains. A 9 speed chain seems to physically sit OK on the chainwheels.

Has anyone else had experience with this situation?
GiantAnt
 
Posts: 13
Joined: Fri Mar 21, 2008 4:18 pm

by BNA » Fri Mar 21, 2008 6:40 pm

BNA
 

Postby mikesbytes » Fri Mar 21, 2008 6:40 pm

I would of said probably not, as 7 speed has wider rollers, however 9 speed has the same roller width as 10 speed, the difference is that the rivets are narrower.

As you say a 9 speed seems to sit on it, do you mean that you can ride the bike with the 9 speed chain on it?

OK, assuming that the 9 speed chain does work, the only risks are that the 10 speed chain could possibly fall between the chain rings, and/or there are changing problems.
Fixie riders never freewheel
User avatar
mikesbytes
Super Mod
Super Mod
 
Posts: 14523
Joined: Thu Dec 01, 2005 10:42 pm
Location: Tempe, Sydney

Postby GiantAnt » Tue Mar 25, 2008 10:14 pm

No i haven't ridden the bike with a 9 speed chain. It just appeared to physically sit on the chainring without any problems.
GiantAnt
 
Posts: 13
Joined: Fri Mar 21, 2008 4:18 pm


Return to Retro biking

Who is online

Users browsing this forum: Exabot [Bot], MSNbot Media



Top Bikes & Gear
Torpedo 7 Torpedo7 AU
Cell Bikes Cell Bikes AU
Ground Effect Ground Effect NZ
Ebay Ebay AU
Chain Reaction Cycles CRC UK
Wiggle Wiggle UK
ProBikeKit ProBikeKit UK
Evans Cycles Evans Cycles UK
JensonUSA Jenson USA
JensonUSA Competitive Cyclist