rolandp wrote:I also can't work out how to set the date/time. Luckily the date/time isn't on the footage, but the date of the file produced is from 2010, so makes a little harder when looking later for an item.
1. Create a plain text file (no font formatting) with just a single text line in the format "year-month-day hour:minutes:seconds" in 24 hour format like this: 2010-12-29 13:34:45
2. Save the file with the name "TIMESET.TXT" and copy it to the flash card root directory (the one that first appears when the card is recognized by the computer). This can be done with an external card reader or with the camera connected to the computer as a USB removable drive.
3. With the card in the camera and the camera unplugged from the computer, turn on the camera. The camera will then read the file, set the date and time, and erase the file from the flash card automatically.
Graeme
***Looking For Information About Bicycle Cameras ***
The GoPros in this thread look pretty ugly when mounted to the bike. The form factor of the Contour is better suited to a bike mount. I picked up a second-hand Contour HD on ebay for $150 which I was able to mount unobtrusively, slung under the stem. At a casual glance you would probably think it was a headlight or something.
I made up a mount with a small carved block of wood cable-tied under the stem and a Bunnings metal bracket to take the tripod-mount adaptor for the camera, which lies on its side with the lens then rotated 90 degrees to get the picture correct. A bit of foam from the local craft store seems to give about the right amount of damping and the videos are really smooth.
The tripod adaptor holds the camera via the rails on both sides. I found this was a big improvement over the flat surface camera mount which only holds the camera on one side and is not really steady enough. The camera can be quickly removed from the mount using the knurled nut into the tripod adaptor.
scirocco wrote:I picked up a second-hand Contour HD on ebay for $150 which I was able to mount unobtrusively, slung under the stem. At a casual glance you would probably think it was a headlight or something.
Nice mounting position. Would love to see more photos of your mount.
Aushiker wrote:Nice mounting position. Would love to see more photos of your mount.
No problem. The bracket is screwed into the wooden block at the edges where it's thickest. The block looks quite chunky but in fact most of it is cut away to follow the profile of the stem. I used jarrah, as a first trial using with pine was too weak.
Today was bike day was supposed to be doing 1 hour on mudguards I then thought just do everything... Well 4 hours later... Have not mounted it yet or tested it but pressing the buttons will be interesting if its in a tic tac box or pressing them and putting it in... Hopping it does not press more buttons in the process... Battery will be under the seat jumbo tic tac box will not fit... dont think it will get to wet... Any one tried switching the standard jumbo battery with a phone one?
I've struggled with the 808 #16 mounting. At the moment I have it velcroed to a reflector mount with another strip of onewrap around it to secure it. I realised that sitting right next to it is a rubber torch mount which I'm using for my Ultrafire light: http://dx.com/universal-adjustable-bicy ... 71?item=18
The rubber is very flexible and the sides of it can be pushed almost flat. The 808 #16 can be pressed hard into the groove and then velcro-strapped in place.
I didn't get a chance to try it out this morning but I shall give it a go tonight and take photos
newbikeorupgrade wrote:Today was bike day was supposed to be doing 1 hour on mudguards I then thought just do everything... Well 4 hours later... Have not mounted it yet or tested it but pressing the buttons will be interesting if its in a tic tac box or pressing them and putting it in... Hopping it does not press more buttons in the process... Battery will be under the seat jumbo tic tac box will not fit... dont think it will get to wet... Any one tried switching the standard jumbo battery with a phone one?
is that an 808 in a tic tac box?
what is the cylindrical jigger strapped to the seat stay?
rolandp wrote:I also can't work out how to set the date/time. Luckily the date/time isn't on the footage, but the date of the file produced is from 2010, so makes a little harder when looking later for an item.
1. Create a plain text file (no font formatting) with just a single text line in the format "year-month-day hour:minutes:seconds" in 24 hour format like this: 2010-12-29 13:34:45
2. Save the file with the name "TIMESET.TXT" and copy it to the flash card root directory (the one that first appears when the card is recognized by the computer). This can be done with an external card reader or with the camera connected to the computer as a USB removable drive.
3. With the card in the camera and the camera unplugged from the computer, turn on the camera. The camera will then read the file, set the date and time, and erase the file from the flash card automatically.
If nothing else they'll give me a couple of clamps and tripod screws to work with...
Cheers JM
Let us know what they arelike when you get them.
Graeme
They're rather better than I thought they'd be, I'll get a couple of photos up in a while. A bit chunky, and not really rigid enough to use unmodified with the Otek's rather tall formfactor, but I can see a couple of relatively simple ways to modify to reduce the height and increase the rigidity and support. The biggest downfall is the handlebar clamps don't really adjust that much, about 23 to 25mm is the limit, so the taped bars of the roady are out of range. Couple of good strong rubber bands will sort that tho.
Crittski wrote:I already have a ContourGPS and picked up a ContourRoam second hand for half the new price, so will have front and rear facing cameras for my commute. Just need one on the helmet now (I don't like the weight of the contour on the helmet, it would be great to find a really light camera for the helmet...)
Since I ride with Ayups on my helmet, I find the GoPro with the Chesty chest mount unobtrusive.
"People have a right to their own opinions, but not their own facts. Evidence must be located, not created, and opinions not backed by evidence cannot be given much weight." -- James W Loewen
Just an update on the 16GB SansDisck Ultra micro SDHC card for the ContourGPS - I had feedback from contour tech support that the Ultra model is NOT COMPATIBLE. I purchased it with an standard SD adapter and it was flawless with the GoPro, however having already purchased a 16GB card for this, it turns out to be waste of money. I am pretty annoyed as the manual stated that SDHC 16GB cards are compatible and should have somewhere mentioned that this excludes the SansDisk Ultra model. Although I did everything right, I have to sit on the cost of this card.
For interest, some feedback on the ContourGPS verses GoPro Hero.
As the ContourGPS was on loan and had to be returned in perfect condition, I was reliant on the mounts and couldn't create custom mounts or improve the mounts to elimate vibration. As a result the footage was poor - lots of rolling shutter. I like the physical on/off switch for filming on the Contour, though this also makes it hard to mount well. Also, the on/off switch for the camera make it compatible with the GoPro (operating while riding - long trips to save battery) was tough. On this camera, the wireless card to hookup with an iphone is, I think, a must have - to check out the alignment of the shot.
The GoPro, despite being bulky was actually easier to mount using cable ties, blue tack and gaffe for a really solid mount - as a result the video was excellent and I have a feeling that the video was crisper anyway. I custom drilled one of the fittings so I could use a alan key bolt mounts (eg. water bottle or pannier mount positions) and then use cable ties for a really solid mount. The waterproof case was good for peace of mind while riding and the battery life was great. Operating it, turning on and (if need be) changing modes was annoying. I spotted a wifi remote control due in (US) summer 2012 which is coupled with the BacPac screen and will be a must-have. Not only to easily check what is being filmed, also to start recording remotely.
2013 BNA Ultimate Survey - Now Closed - 775 participants - results out soon
How much are you asking ? Also I'm in Adelaide 
