Yeah...need to do that ride every day for a monthmikesbytes wrote:Must of been those extra K's to West Head last Saturday weektoolonglegs wrote:maybee thats why no one could catch me when I bridge across to the break
Tubeless Road Trial
- toolonglegs
- Posts: 15463
- Joined: Fri Jun 29, 2007 7:49 pm
- Location: Somewhere with padded walls and really big hills!
Postby toolonglegs » Sun Jan 13, 2008 3:27 pm
- toolonglegs
- Posts: 15463
- Joined: Fri Jun 29, 2007 7:49 pm
- Location: Somewhere with padded walls and really big hills!
Postby toolonglegs » Sun Jan 13, 2008 5:51 pm
I would still be riding singles on the track...cant beat 220 psi on a good set of track wheels.But on the road they aint bad...so far I have done 4 races on the front and 2 on the rear...only problem is I have cut my Sunday ride in half as I used to ride to race on the M7 and race then go back same way..but now I drive to the track as I dont want to trash my tires as they wernt cheap.snailman wrote:haha let me know how these go, im interested in goin towards singles... more mainly for track though...
- toolonglegs
- Posts: 15463
- Joined: Fri Jun 29, 2007 7:49 pm
- Location: Somewhere with padded walls and really big hills!
Postby toolonglegs » Mon Jan 14, 2008 6:15 pm
I got them from LBS...$115 -120 for each tyre.$12 per valve,$20 roll of rim sealing tape,not sure on the sealant.About $300 all up.ggundersen wrote:How much did you pay for the tires, valves and sealant?
- toolonglegs
- Posts: 15463
- Joined: Fri Jun 29, 2007 7:49 pm
- Location: Somewhere with padded walls and really big hills!
Postby toolonglegs » Mon Jan 14, 2008 8:34 pm
Yeah about the same,plus I had 3 valves in total and I got the largest sealant as I want to do my mtb as well.Let us know how you go
-
- Posts: 259
- Joined: Sun Jan 06, 2008 9:58 am
Postby singletracking » Mon Jan 14, 2008 8:47 pm
It hasn't happened to me, but my physio (and Australian MTB champion) described what happened when she had a tubeless tyre blow up (read: explode).
Basically, her husband was inflating it to mountain-bike pressure only (I think they were going to 40psi for a quick ride on the road or so) and the tyre gave way and exploded. Loudly. It smashed out all the windows, left her husband deafened for a day and coated the room with Stans No Tubes...
They now always wear eyewear when tinkering with tubeless.
And now that tubeless is coming to road tyres, this thread made me wonder what effect a road tyre exploding at 120psi would have?
Basically, her husband was inflating it to mountain-bike pressure only (I think they were going to 40psi for a quick ride on the road or so) and the tyre gave way and exploded. Loudly. It smashed out all the windows, left her husband deafened for a day and coated the room with Stans No Tubes...
They now always wear eyewear when tinkering with tubeless.
And now that tubeless is coming to road tyres, this thread made me wonder what effect a road tyre exploding at 120psi would have?
Last edited by singletracking on Mon Jan 14, 2008 9:59 pm, edited 1 time in total.
- toolonglegs
- Posts: 15463
- Joined: Fri Jun 29, 2007 7:49 pm
- Location: Somewhere with padded walls and really big hills!
- toolonglegs
- Posts: 15463
- Joined: Fri Jun 29, 2007 7:49 pm
- Location: Somewhere with padded walls and really big hills!
Postby toolonglegs » Mon Jan 14, 2008 9:22 pm
I had one at the drag strip a few weeks back...front blew of rim coming out of the corner onto straight...manage to hold it.Nearly as good as when I snapped my crank
- toolonglegs
- Posts: 15463
- Joined: Fri Jun 29, 2007 7:49 pm
- Location: Somewhere with padded walls and really big hills!
Postby toolonglegs » Thu Apr 17, 2008 8:45 pm
Well I have only had one puncture on my tubeless set up and that was slow enough that I could finish my race.But the rear DuraAce rim had a problem with the valve hole being butchered by previous owner.The problem being that the tubeless valve would pull thru into the rim because the hole was too big.So first time I filled the hole up with silicon and let it go hard and re drilled the hole.It lasted 10 weeks or so but eventually the silicon compressed and the valve pulled thru.So this time I used putty metal to shove into the hole and then redrill but i think it has put too much weight into that part of the rim.Combined with the tubeless valve it looks like it might put the wheel way out of balance....If I flip the bike upside down,then spin the wheel up to full speed it shakes the bike uncontrollably and even a hard hold on the frame wont stop it.
Cant even be bothered riding it...going to bite the bullit and buy a new rim!.Ouch!!!.
Cant even be bothered riding it...going to bite the bullit and buy a new rim!.Ouch!!!.
- toolonglegs
- Posts: 15463
- Joined: Fri Jun 29, 2007 7:49 pm
- Location: Somewhere with padded walls and really big hills!
Postby toolonglegs » Fri Apr 18, 2008 7:28 am
yeah i am loving the ride on these tyres....huge difference in rolling resistance and snap out of corners.Less pressure makes bike handle better too.I wont be going back to tubes.
- mikesbytes
- Super Mod
- Posts: 22177
- Joined: Thu Dec 01, 2005 11:42 pm
- Location: Tempe, Sydney
- Contact:
Postby mikesbytes » Fri Apr 18, 2008 9:39 am
Are you going to fit the new rim yourself?
If the R-1 rule is broken, what happens to N+1?
- toolonglegs
- Posts: 15463
- Joined: Fri Jun 29, 2007 7:49 pm
- Location: Somewhere with padded walls and really big hills!
Postby toolonglegs » Fri Apr 18, 2008 12:27 pm
Just took my bike into the LBS...they said dont worry about it.Not convinced...I had it trued and will give it a go on a smooth descent...might be OK as it is the rear wheel.Would be fine with a tube so if I am not happy it will go on ebay.Not really worth a new rim when I can get a 2008 Tubeless DuraAce wheel for $380 from c r c.
Jump to
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+10:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
Brought to you by Bicycles Network Australia | © 1999 - 2024 | Powered by phpBB ®
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.