Is that because the "repairman" still goes to high school during the week?ldrcycles wrote: ...snip... The response "The bike repair man is in this weekend, if you can drop it off on friday with a copy of the receipt and your details he can have a look at it". ...snip....
So how bad is a Big W bike, really?
-
- Posts: 1916
- Joined: Mon Jan 21, 2008 11:21 am
- Location: Perth
Re: So how bad is a Big W bike, really?
Postby mitzikatzi » Wed Apr 18, 2012 3:01 pm
- ldrcycles
- Posts: 9594
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: So how bad is a Big W bike, really?
Postby ldrcycles » Wed Apr 18, 2012 4:22 pm
LOL, i did find it amusing that they referred to a 'bike repair man', guess i'll have to wait and see.mitzikatzi wrote:Is that because the "repairman" still goes to high school during the week?ldrcycles wrote: ...snip... The response "The bike repair man is in this weekend, if you can drop it off on friday with a copy of the receipt and your details he can have a look at it". ...snip....
It is definitely a manufacturing defect, i didn't know about that so i will bear that in mind, thanks .rudeboy wrote: If in fact it is a manafacturing defect, you have the right to choose, repair, replace or refund.
Usually with good reason, IME the Preset is the exception to the rule (which isn't really that hard when it only has one gear).Backdoorboss wrote:Now I know, people say to stay away from these type of bikes here on the forum..
My thoughts exactly. So let's work it out then, worst case scenario, ie someone who has no tools so needs a bike shop to do stuff for them.Backdoorboss wrote: When I was looking to purchase a bike there weren't many single speed bikes under $100 brand new.
The next cheapest bike on my list would jump to $250 brand new.
Now I get to spend approx $150-$200 on a bike, learn a few things about bikes and also have fun.
I think thats a win.
So far on my Preset I have spent.
Lasco Crankset: $35
Wellgo pedals: $15
Shimano Bottom Bracket: $12
Total: $62
Lets see if I can keep this under $200.00 I still need a comfy saddle and bling bling wheels.
Bike $98.
Service to get all the bearings adjusted properly $60 (maybe a bit more or less depending on the shop).
New saddle (assuming the stock one is uncomfortable) $30? http://www.ebay.com.au/itm/SCHWINN-Moun ... 231b612590 something like that would do.
'Bling bling' wheels- Say $100, http://www.ebay.com.au/itm/Stars-Cirle- ... 27c4a2474c
and
http://www.ebay.com.au/itm/DEEP-V-FIXIE ... 27c08d4760
as examples, neither would be the best quality i'm guessing but this is a fixie remember, it's all about looks .
Crank, pedals, bb- $62.
Smaller 28c tyres- $45ish http://www.ebay.com.au/itm/CST-Sensamo- ... 2ebca195cc
Fitting new parts- $40-50?
So that's a total of $445. So still $4 cheaper than the Cell fixie. And if you can do the spanner work yourself it would be $335.
Remembering that it's still a good ride stock.
-
- Posts: 1916
- Joined: Mon Jan 21, 2008 11:21 am
- Location: Perth
Re: So how bad is a Big W bike, really?
Postby mitzikatzi » Wed Apr 18, 2012 4:41 pm
http://www.youtube.com/watch?v=U01xasUtlvw
A search on bike exchange for "fixie" $300 to $500 brings up some nice bikes.
- ldrcycles
- Posts: 9594
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: So how bad is a Big W bike, really?
Postby ldrcycles » Wed Apr 18, 2012 7:41 pm
-
- Posts: 77
- Joined: Wed Jun 29, 2011 12:54 pm
Re: So how bad is a Big W bike, really?
Postby rudeboy » Wed Apr 18, 2012 8:16 pm
http://www.accc.gov.au/content/index.ph ... lia-gov-auldrcycles wrote:It is definitely a manufacturing defect, i didn't know about that so i will bear that in mind, thanks .rudeboy wrote: If in fact it is a manafacturing defect, you have the right to choose, repair, replace or refund.
-
- Posts: 9
- Joined: Mon Apr 16, 2012 1:39 pm
Re: So how bad is a Big W bike, really?
Postby ekwj » Wed Apr 18, 2012 9:40 pm
Lol, that's probably it.mitzikatzi wrote:Is that because the repairman" still goes to high school during the week?
Yupp and yupp, my thoughts exactlyBackdoorboss wrote:So now im thinking I have about $150 to spend on parts. Only thing is I didnt know buying this kind of stuff could be so addictive, Im probably going to end up spending more than $150.
Now I get to spend approx $150-$200 on a bike, learn a few things about bikes and also have fun.
I think thats a win.
Thanks for the links =]mitzikatzi wrote:Cheap fixie parts here
or or
I'm now in a dilemma. Ordered a bullhorn bar + quill stem off eBay but the sizes are a mismatch although the listing stated that they were both 26mm. I'm not stuck with a 25.4mm quill and a 26mm bar. Anyone have any idea where I can get either one of them cheap? Either a 26mm quill stem or a 25.4mm bullhorn? Thanks =]
-
- Posts: 52
- Joined: Sun Apr 15, 2012 7:12 pm
Re: So how bad is a Big W bike, really?
Postby Backdoorboss » Thu Apr 19, 2012 11:44 pm
That sucks, I wouldnt pay or perhaps obtain a refund? If it was listed incorrectly I would think its justified to ask for one.ekwj wrote:
I'm now in a dilemma. Ordered a bullhorn bar + quill stem off <a href="http://www.ebay.com/" rel="nofollow" target="_blank" title="Link added by VigLink" class="vglnk">eBay</a> but the sizes are a mismatch although the listing stated that they were both 26mm. I'm not stuck with a 25.4mm quill and a 26mm bar. Anyone have any idea where I can get either one of them cheap? Either a 26mm quill stem or a 25.4mm bullhorn? Thanks =]
Found this on velogear http://www.velogear.com.au/products/Hos ... 0-141.html $35
I was going to stick with the flat bar, but these bullhorn bars are growing on me.
Out of curiosity what is this size of the of stock quill stem? couldn't you use that instead?
Im going to check these wheels out tomorrow, straight after work going to pop into their shop, I could probably even ride there. Any excuse to ride really, the daily commute is a bit too short for me now.ldrcycles wrote:
'Bling bling' wheels- Say $100, http://www.ebay.com.au/itm/DEEP-V-FIXIE
as examples, neither would be the best quality i'm guessing but this is a fixie remember, it's all about looks
I wonder if they could even put them on for me for no charge, green or blue, decisions decisions.
Well if all goes to plan, bottom bracket: $12, crank: $35, Pedal: $15, wheels: $99, saddle: $30
Total: $191
Still under $300 for the bike.
-
- Posts: 9
- Joined: Mon Apr 16, 2012 1:39 pm
Re: So how bad is a Big W bike, really?
Postby ekwj » Fri Apr 20, 2012 8:16 am
Told the seller about it and he's happy to offer me a refund/store credit. Told me I could keep the stem and do whatever I want with it so that's fine =]Backdoorboss wrote:That sucks, I wouldnt pay or perhaps obtain a refund? If it was listed incorrectly I would think its justified to ask for one.
This is the guy I bought it off, don't trust the 25.4mm bar size. I asked him about it and he said unfortunately it's 26mm. The listing is incorrect.Backdoorboss wrote:Found this on velogear http://www.velogear.com.au/products/Hos ... 0-141.html $35
Check out pumpdoctor11 as an eBay seller, the stuff is cheaper off his eBay store. Has free shipping every once in awhile. Looks like it's back to regular shipping costs.
I may just have to go with the $45 version 26mm clamp quill stem.
- ldrcycles
- Posts: 9594
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: So how bad is a Big W bike, really?
Postby ldrcycles » Sat Apr 21, 2012 10:42 am
-
- Posts: 1916
- Joined: Mon Jan 21, 2008 11:21 am
- Location: Perth
Re: So how bad is a Big W bike, really?
Postby mitzikatzi » Sun Apr 22, 2012 9:01 pm
- HLC
- Posts: 722
- Joined: Sun Mar 04, 2012 11:23 pm
- Location: Sydney.
Re: So how bad is a Big W bike, really?
Postby HLC » Mon Apr 23, 2012 10:49 am
Remembering ultimately, that you have just spent an extra 200+ dollars and a whole heap of your time on a BIg W bike.ldrcycles wrote:
So that's a total of $445. So still $4 cheaper than the Cell fixie. And if you can do the spanner work yourself it would be $335.
Remembering that it's still a good ride stock.
For 299, you can get at Hasa 'fixie' off cycling deal in Vic, usually with free shipping which is a far superior bike and Better than the cell offerings. The Hasa bike is the best of the sub 500 completes!
- ldrcycles
- Posts: 9594
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: So how bad is a Big W bike, really?
Postby ldrcycles » Mon Apr 23, 2012 11:51 am
Fixed that for you .HLC wrote: Remembering ultimately, that you have just spent an extra 200+ dollars and a whole heap of your time on an attractive, smooth, fast singlespeed..
- ldrcycles
- Posts: 9594
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: So how bad is a Big W bike, really?
Postby ldrcycles » Mon Apr 23, 2012 1:56 pm
- ldrcycles
- Posts: 9594
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: So how bad is a Big W bike, really?
Postby ldrcycles » Mon Apr 23, 2012 7:12 pm
That i'm fine with, it works. I'm not a militant consumer advocate so i'm not going to take it back and say 'this lever still sticks out 3mm, i want it replaced'.
The thing that bothered me is that for whatever reason, 'bicycle repair man' decided to 'adjust' the front wheel bearings. They were spot on when it went in, and it has come back so tight it can barely move. Lifting the bars and spinning the front wheel, it won't even make a full revolution, that tight!
So my conclusion there is, buy a Preset cos it's great fun, but open the box and have a bit of a check before you take it out the door. Exactly what i'll be doing when/if i buy my next one.
-
- Posts: 52
- Joined: Sun Apr 15, 2012 7:12 pm
Re: So how bad is a Big W bike, really?
Postby Backdoorboss » Tue May 01, 2012 12:07 am
Went from this:
(Commuted on it for 3 weeks everyday, with a couple of long rides on the weekend.)
To this:
(Have not used it to commute yet, will let everyone know how it goes after awhile.)
I'm pretty happy on how it turned out. I still need to get another saddle though, perhaps a nice comfy white or green one, still undecided.
I did go over my budget of $200.00 which was mostly due to buying various tools to remove this pain in the ass bottom bracket fixed cup.
Even my local bike shop couldn't remove it (but I think the guy was just trying to get rid of me because I wasn't buying a bike)
Thanks to ldrcycles and the Sheldon Brown website I managed to remove that nasty thing off and replace it with the new bottom bracket.
There is nothing like doing it yourself and that feeling of achievement. I think the whole street heard me scream for joy when it came off.
Anyway I also went and got bullhorn bars ($25) and bar tape ($15) which put me over. I had to also replace the brake levers ($25) because the old ones wouldn't fit on the bullhorn bar.
Still, I am happy with how it turned out and the knowledge I gained from the experience of it all, I also have a few extra tools that I will probably use again some day.
All in all, excellent bike for $98, commute to work, relaxing rides on the weekend and get fit on.
Also a good bike to learn a few things on and not spend a huge fortune doing so.
I now have the confidence to build another Fixie/SS from complete scratch now, probably my next project.
- ldrcycles
- Posts: 9594
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: So how bad is a Big W bike, really?
Postby ldrcycles » Tue May 01, 2012 9:14 am
That sounds great, i know that feeling haha. The finished product looks brilliant, great work .Backdoorboss wrote:
To this:
There is nothing like doing it yourself and that feeling of achievement. I think the whole street heard me scream for joy when it came off.
Anyway I also went and got bullhorn bars ($25) and bar tape ($15) which put me over. I had to also replace the brake levers ($25) because the old ones wouldn't fit on the bullhorn bar.
Still, I am happy with how it turned out and the knowledge I gained from the experience of it all, I also have a few extra tools that I will probably use again some day.
All in all, excellent bike for $98, commute to work, relaxing rides on the weekend and get fit on.
Also a good bike to learn a few things on and not spend a huge fortune doing so.
- hazmat5765
- Posts: 195
- Joined: Sun Mar 15, 2009 11:29 pm
- Location: Coffs Harbour NSW
Re: So how bad is a Big W bike, really?
Postby hazmat5765 » Tue May 01, 2012 4:16 pm
Rob
-
- Posts: 9
- Joined: Mon Apr 16, 2012 1:39 pm
Re: So how bad is a Big W bike, really?
Postby ekwj » Wed May 02, 2012 9:59 am
Just curious on how you went with replacing the bottom bracket as I'm about to do it myself soon. You mentioned having problems with replacing it. Was the 36-piece toolkit from cycling deal insufficient? What extra parts did you have to buy?
P.S. Awesome transformation on your bike. The bullhorns are great aren't they? =D
-
- Posts: 52
- Joined: Sun Apr 15, 2012 7:12 pm
Re: So how bad is a Big W bike, really?
Postby Backdoorboss » Wed May 02, 2012 8:39 pm
A friend of mine tried carrying the bike and said he could really notice the bike was much lighter then it was before.
The (right) drive side fixed cup of the bottom bracket was the hardest piece to remove. That sucker is on really tight, even my local bike shop mechanic couldn't get it off with a proper fixed cup tool. (weak)ekwj wrote:Just curious on how you went with replacing the bottom bracket as I'm about to do it myself soon. You mentioned having problems with replacing it. Was the 36-piece toolkit from cycling deal insufficient? What extra parts did you have to buy?
I purchased the 8 piece tool set here because the 13 piece one was not available yet. I'm glad I did because I didn't really need the bigger ones.
I only used the Allen keys, bottom bracket tool, the crank puller tool and chain rivet extractor from the tool set.
The rest of the stuff you can just use an adjustable wrench, which I previously had. You will however need a bigger Allen key to put on the cranks, the ones that came with the toolkit were all too small, lucky I had one around the house(8mm I think).
I had to buy a socket wrench plus a socket wrench extension from Bunnings to get the fixed cup removed. You also need a Hex bolt, a nut and some flat washers ($4), I used 3 washers myself.
I used the socket extension to tighten the bolt and nut from inside the bottom bracket, as the adjustable wrench is too big to fit through.
Here is Sheldon Browns link for the BB Tool, You basically tighten the bolt and nut as much as you can until it fuses together with the fixed cup so that when you keep tightening it eventually comes off.
Best to use the socket wrench and hammer at the wrench handle a bit to loosen it a little. Then use all your strength until you see a few stars. After a few manly yells and shouts it will eventually come off.
Oh yeah, remember it is CLOCKWISE to loosen the right hand side fixed cup.
Any questions just let me know.
Cheers,
Backdoorboss
-
- Posts: 9
- Joined: Mon Apr 16, 2012 1:39 pm
Re: So how bad is a Big W bike, really?
Postby ekwj » Thu May 03, 2012 12:02 am
You're a champ. That information would be invaluable to me.
Now I either jump the gun and pop by cycling deal this weekend to get the gold crankset + gold rim brake combo or wait till next weekend to get the silver crankset + silver rim brake combo.
Black and silver or black and gold.. Hmm.. Gold looks very boss....
- grasshopper
- Posts: 331
- Joined: Mon Nov 02, 2009 8:04 pm
- Location: Melbourne
Re: So how bad is a Big W bike, really?
Postby grasshopper » Thu May 03, 2012 10:10 am
-
- Posts: 2
- Joined: Fri Apr 13, 2012 8:50 am
Re: So how bad is a Big W bike, really?
Postby Phantomrider » Tue May 08, 2012 12:24 pm
Piccies available - haven't figured out how to load them here yet.
- ldrcycles
- Posts: 9594
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: So how bad is a Big W bike, really?
Postby ldrcycles » Mon May 14, 2012 8:27 pm
-
- Posts: 922
- Joined: Sat Aug 18, 2007 4:55 pm
- Location: SOR.perth.au
Re: So how bad is a Big W bike, really?
Postby cray- » Fri Jun 15, 2012 12:29 pm
They're currently on sale at BigW for $78.40 if anyone else is keen:
http://www.bigw.com.au/sports-leisure/b ... muter-bike
- ldrcycles
- Posts: 9594
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: So how bad is a Big W bike, really?
Postby ldrcycles » Fri Jun 15, 2012 1:07 pm
Return to “Buying a bike / parts”
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+11:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.