Popular Bike Shops
Join the Cycling Forums on Strava
Australian Cycling Forums on Strava
Latest Reviews and Articles
Will your next bike be Intelligent? ABS and Smart Bike Tech
Vitus Vitesse EVO Disc Review – Speed Machine indeed!
- Posts: 248
- Joined: Tue Oct 17, 2006 12:49 pm
- Location: Annandale, Sydney
I've managed to convince a frind that it is agood idea that he pulls his bike out and come riding with me (it is a good idea - I don't care what you've heard about me riding style!).
My friends says that he'll need to tension his spokes before he goes because they are ' like spaghetti' which can't be good.
I've got the tool which I will take around tonight and we'll have a crack but:
Q. Are there any tricks to the the process?
Q. Should one alternate opposite sides of the wheel all the way round,or
Q. Should one tighten one side a little (say 1/4 turn each spoke) first?
Q. What's too tight, what's too loose?
Clearly I have no idea.
Thanks for any help.
- Super Mod
- Posts: 19230
- Joined: Thu Dec 01, 2005 11:42 pm
- Location: Tempe, Sydney
- Super Mod
- Posts: 9653
- Joined: Fri May 25, 2007 5:21 pm
- Location: Success, WA
Assuming there are no buckles, mark a spoke with a piece of sticky tape as the starting spoke and progress your way around the wheel, doing each spoke in turn. That tensions both sides at once.
Do only half a turn of the nipples per wheel rotation (leave the wheels on the bike and turn it upside-down.) If the wheels were well built in the first place, you probably only need half a turn per nipple anyway. If not, you may need to go around a second time. Any more than that and you should progress in 1/4 turn increments.
If your work has off-set the rim (ie the dishing has been disturbed), tighten the appropriate side by 1/4 nipple turn, repeating until the rim is centred on the frame again.
How tight? Take your own wheels with you for comparison. The tension will be different on the drive side compared with the non-drive side of the rear wheel, and if your mate as disc brakes, the same will be true for the front.
Keep a clothes peg handy to mark the last spoke tensioned when you drop the spoke spanner.
Use cable ties around the frame or forks as a guide for truing.
Music was better when ugly people were allowed to make it ....
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Fixed Gear/ Single Speed
- Electric Bicycles
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Road Racing
- Road Biking
- Time Trial
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Western Australia
- New South Wales
- South Australia
- Northern Territory
- Country & Regional
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Cycling Brands
- Malvern Star
- Custom Builders
- Generic Carbon
Who is online
Users browsing this forum: No registered users
About the Australian Cycling Forums
The largest cycling discussion forum in Australia for all things bike; from new riders to seasoned bike nuts, the Australian Cycling Forums are a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.