Gell Inserts for the Handlebars
- europa
- Posts: 7334
- Joined: Sun Jul 16, 2006 10:51 am
- Location: southern end of Adelaide - home of hills, fixies and drop bears
Gell Inserts for the Handlebars
Postby europa » Sat Jan 27, 2007 12:30 am
This week, I've added tyre liners (because sharp things let all the air out of my rear tyre) and gell hand grips.
Gell inserts?
Well, like everything with me, there is a story. Tuco can now go to the end of this yarn and read the result Everyone else can suffer through the full story
Nah.
I suffer from numb hands. A large part of this is from a motorcycle accident about three months before my son was born which has trapped a nerve in my right shoulder and which saw me sell my beloved GSXR1100 for a more sensible bike (a ruddy BMW ... oh the shame, the shame). But now, fourteen years later, riding bicycles rather than the motorised equivalent, I still suffer from a very numb right hand within the first half hour of riding out of my driveway.
Last night, I installed a set of gell inserts to the Black Beast (my Trek520). These required the removal of my bar tape, settling a set of 2mm thick strips of gell onto the 'pressure points' of the bars, and redoing the bar tape.
I don't think it's worth giving the brand name ... apart from the fact that the box is now in the bin, I'm sure there are other products that do the same thing.
Today I went for ride with my son that took an hour and a half and covered 35 km. The bars with their new gell inserts and new bar tape felt a lot fatter and a lot more comfortable than the old bare bars and tape. More imporantly, I didn't have any real numbness in my right arm until well after the one hour mark where it normally is a problem within the first half hour and even then, I had none of the total lack of feeling I normally suffer within the first hour. I suffered no discomfort on the left arm at all.
Conclusion?
Gell inserts under your bar tape are well worth the messing about installing them ... not to mention the (largely minimal) cost.
Richard
-
- Posts: 981
- Joined: Mon Nov 20, 2006 7:25 pm
- Location: Riding a real steel bike - somewhere!
- tuco
- Posts: 2016
- Joined: Wed Oct 11, 2006 3:36 pm
Postby tuco » Thu Feb 01, 2007 2:53 pm
Yep, I got a laugh out of that and boy, do I need it. We've had just under 500mm of rain in 12 days, it's still pissing down, there's a cyclone watch out for the Gulf, the possibility of one forming in the Coral Sea and the BOM don't know what's happening with the low on the cape causing all this rain.europa wrote: Tuco can now go to the end of this yarn and read the result Everyone else can suffer through the full story
Richard
I think I can kiss goodbye to my second race on Sunday with this weather.
Doesn't matter if it's canceled, the juniors have a senior ride behind them (for safety - it's a big circuit) and it'll be my daughters first race so I was going to sacrifice my race to ride around behind her.
Anyway, back on topic, I might give that a go myself. I get numb hands and at times and I've put the brakes on, my hand has slipped off the lever and I didn't realise!!
I actually read all this post for a change and you stated you redid the bar tape, did you use the old tape or use new tape? I'm new to bar tape, does it have a sticky back and if so could it lose it's stick if reused?
Bloody hell, I feel like going home because it's so dark outside but it's not even 2pm.
- mikesbytes
- Super Mod
- Posts: 22183
- Joined: Thu Dec 01, 2005 11:42 pm
- Location: Tempe, Sydney
- Contact:
Postby mikesbytes » Thu Feb 01, 2007 3:55 pm
I had the problem with my left hand going numb for years and then it just disappeared. I don't know why it disappeared.tuco wrote:Anyway, back on topic, I might give that a go myself. I get numb hands and at times and I've put the brakes on, my hand has slipped off the lever and I didn't realise!!
- tuco
- Posts: 2016
- Joined: Wed Oct 11, 2006 3:36 pm
Postby tuco » Thu Feb 01, 2007 4:02 pm
Your left hand or the numbness?mikesbytes wrote:I had the problem with my left hand going numb for years and then it just disappeared. I don't know why it disappeared.tuco wrote:Anyway, back on topic, I might give that a go myself. I get numb hands and at times and I've put the brakes on, my hand has slipped off the lever and I didn't realise!!
- sogood
- Posts: 17168
- Joined: Thu Aug 31, 2006 7:31 am
- Location: Sydney AU
Postby sogood » Thu Feb 01, 2007 4:31 pm
RK wrote:And that is Wikipedia - I can write my own definition.
- Bnej
- Posts: 2880
- Joined: Fri Jun 30, 2006 11:43 pm
- Location: Katoomba, NSW
Postby Bnej » Thu Feb 01, 2007 10:19 pm
I have spoken to one older bloke (45ish) who said that front suspension resolved it for him - i.e, it was being caused by shocks and vibration.
I find sometimes using Gel gloves, it actually can make it worse - it's more comfortable to leave my hands in the same spot for longer so I don't shift around on the bars so much. I still use them for long trips though.
Without gloves, I find I get sweaty hands quicker than tired hands, so I move position around the curves any time they get sweaty.
- europa
- Posts: 7334
- Joined: Sun Jul 16, 2006 10:51 am
- Location: southern end of Adelaide - home of hills, fixies and drop bears
Postby europa » Thu Feb 01, 2007 10:27 pm
On a related note, my Europa still wears the foam bar covers I put on in the eighties and they are just as good today as 12 months after fitting them. That has to be some sort of record for a manufacturing miscalculation
Tuco, I did put new tape on, but that's only because I got careless carrying two bikes on the car one day and rubbed through the tape on one of my bars. It finally broke and while I was replacing it, put in the gel strips. It doesn't have a sticky back but seems to have worked pretty well.
Richard
-
- Super Mod
- Posts: 1381
- Joined: Tue Sep 27, 2005 5:32 pm
Postby heavymetal » Fri Feb 09, 2007 3:25 pm
Since I stopped touring on a MTB and riding a touring bike with drop bars, I ride on the hoods and have not had any problems since.
-
- Super Mod
- Posts: 1381
- Joined: Tue Sep 27, 2005 5:32 pm
Postby heavymetal » Fri Feb 09, 2007 3:38 pm
This might sound like strange advice, but try getting a harder seat. I had problems with numbness in the rump, and wear padded shy shorts. I had a fairly well padded seat with gel inserts.pospete wrote:The only numbness i have is in my rump, I might have to go to Bunnings and replace the saddle with a wide plank of wood.
I then got an even more padded seat, with even more gel and the problem got worse. Someone suggested a harder seat, so I got a narrower, harder seat, and can now ride for twice the time, than I used to.
See if you can borrow someone's old hard seat and give it a try.
- sogood
- Posts: 17168
- Joined: Thu Aug 31, 2006 7:31 am
- Location: Sydney AU
Postby sogood » Fri Feb 09, 2007 3:40 pm
Try to stand more often to relieve pressure down there. Plonking your full weight on the saddle and use it as a regular seat is a sure way to get a numb bottom.pospete wrote:The only numbness i have is in my rump, I might have to go to Bunnings and replace the saddle with a wide plank of wood.
RK wrote:And that is Wikipedia - I can write my own definition.
- LuckyPierre
- Posts: 1432
- Joined: Fri Jul 14, 2006 4:37 pm
- Location: Canberra, ACT
Postby LuckyPierre » Fri Feb 09, 2007 4:55 pm
The 'original' Brook's leather saddle still sells and there's no padding on them.bicyclewa wrote:This might sound like strange advice, but try getting a harder seat.
I have a similar one (I think it's a Mafac) on my 1970's Peugeot tourer, The bike is squirrelled away, but I haven't ridden it for years.
- mikesbytes
- Super Mod
- Posts: 22183
- Joined: Thu Dec 01, 2005 11:42 pm
- Location: Tempe, Sydney
- Contact:
Postby mikesbytes » Fri Feb 09, 2007 5:00 pm
I personally wouldn't go back to the leather saddles, had too much trouble with them stretching because they got wet.peterrjleach wrote:The 'original' Brook's leather saddle still sells and there's no padding on them.bicyclewa wrote:This might sound like strange advice, but try getting a harder seat.
I have a similar one (I think it's a Mafac) on my 1970's Peugeot tourer, The bike is squirrelled away, but I haven't ridden it for years.
Return to “General Cycling Discussion”
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: Google [Bot], Google Feedfetcher
- All times are UTC+10:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.