So how bad is a Big W bike, really?
-
- Posts: 109
- Joined: Wed Mar 21, 2012 6:31 pm
- Location: St Lucia, Brisbane
Re: So how bad is a Big W bike, really?
Postby slarv » Fri Jun 29, 2012 8:21 am
-
- Posts: 8
- Joined: Sat Apr 28, 2012 8:33 am
Re: So how bad is a Big W bike, really?
Postby diga » Fri Jul 06, 2012 7:00 pm
- ldrcycles
- Posts: 9593
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: So how bad is a Big W bike, really?
Postby ldrcycles » Sat Jul 07, 2012 8:37 am
-
- Posts: 8
- Joined: Sat Apr 28, 2012 8:33 am
Re: So how bad is a Big W bike, really?
Postby diga » Sat Jul 07, 2012 9:21 pm
-
- Posts: 922
- Joined: Sat Aug 18, 2007 4:55 pm
- Location: SOR.perth.au
Re: So how bad is a Big W bike, really?
Postby cray- » Mon Jul 09, 2012 12:49 am
Quite understandable if people feel they should be sold ready to ride, but it seems that's not the case. With a bit of effort they seem... serviceable, for lack of a better word. Waiting for a report from one of my commuter buddies after he puts some decent kms on his.
-
- Posts: 8
- Joined: Sat Apr 28, 2012 8:33 am
Re: So how bad is a Big W bike, really?
Postby diga » Sat Jul 21, 2012 5:58 pm
- ldrcycles
- Posts: 9593
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: So how bad is a Big W bike, really?
Postby ldrcycles » Sat Jul 21, 2012 8:07 pm
From the first post on the first page. The freewheel is the only weakness, if it breaks replace it (say $10 for a Dicta or $20-30 for Shimano) and you're all good to go again.ldrcycles wrote: the freewheel feels very light and tinny.
-
- Posts: 52
- Joined: Sun Apr 15, 2012 7:12 pm
Re: So how bad is a Big W bike, really?
Postby Backdoorboss » Wed Jul 25, 2012 1:08 am
I havent really done any real maintenance to it either. I only lubed up the chain once and that was today.
Although I did gradually replace most of the parts including the wheels, hence the freewheel as well.
When I was riding the repco stock for the first couple of weeks, especially in the first few days, a lot of things did come loose.
You really do need to check all parts and peices, grease them and re-tighten, not only for a better riding experience but for your peace of mind.
Hey Idrcycles, tonight I just changed my bullhorn bars and put on drop bars instead, got the stem and bars for a bargain price of $15!ldrcycles wrote:I've decided to change my Preset to drops (and maybe buy another one down the track). I'm going to change the cranks, probably to Shun and not least to get some higher gearing, pop on some old bars and stem, add a couple of links to the chain and job done. Well down on the to do list which is jolly long atm so probably won't happen for at least a month or 3.
Here it is installed
- ldrcycles
- Posts: 9593
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: So how bad is a Big W bike, really?
Postby ldrcycles » Wed Jul 25, 2012 8:53 am
- ldrcycles
- Posts: 9593
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: So how bad is a Big W bike, really?
Postby ldrcycles » Mon Jul 30, 2012 8:31 pm
I had some steel 41cm drop bars lying around (suitably they are off the god awful $250 Schwinn Prelude road bike i got from K Mart a few years back) and put them together with an old Sakae stem (because it was black and i couldn't use the stock stem with drops, that's just wrong).
I had wanted to use the original brake levers (just for appearances sake) but they wouldn't fit, i dug up some plastic bodied levers from a Huffy or something that i could stretch a bit to fit but they looked and felt rubbish. So it has ended up with some Lee Chi branded drop bar levers, they don't look great but they're good enough (they may also be left overs from that Schwinn).
Some bar tape from the LBS, and a new saddle (which is white and has Apollo emblazoned across it, but it's comfy and was only $15) and she's back in business.
Just did a 41k ride on it this evening and she goes very well. It's been ages since i rode her so my memory of riding with the riser bars is not too fresh but i can say with the drops it is very comfortable. The change to the cockpit hasn't done anything to help that mild twitchiness/vagueness but it still gets along well enough, and i was able to avoid a halfwitted car that made a solid attempt at smearing me all over the road (thanks to that i can also report that the brakes are working exceptionally well).
I proposed to my girlfriend last weekend and will be moving in with her shortly, so my commute will be much shorter and should suit the Preset well (singlespeed being a great thing for a commuting bike). After a very painful crash on another bike last week due to the chain coming off while i was out of the saddle i am keen to replace the freewheel on the Preset soon, i haven't had any sort of issue with it yet but it's the one obvious weak link on the bike and cheap insurance to replace it.
- ILMB
- Posts: 161
- Joined: Fri Jun 22, 2012 8:15 pm
- Location: Sydney
Re: So how bad is a Big W bike, really?
Postby ILMB » Mon Jul 30, 2012 11:55 pm
Congratulations, and happy lifeldrcycles wrote: I proposed to my girlfriend last weekend ...
- ldrcycles
- Posts: 9593
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: So how bad is a Big W bike, really?
Postby ldrcycles » Tue Jul 31, 2012 8:46 am
Got the pics up, and yes those are 105 pedals on the $98 bike .
Before
After
For the moment i am keeping the stock cranks, the 44-16 should be a good gear for commuting when i want to take it a little bit easier.
- ldrcycles
- Posts: 9593
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: So how bad is a Big W bike, really?
Postby ldrcycles » Thu Aug 02, 2012 10:37 am
- ldrcycles
- Posts: 9593
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: So how bad is a Big W bike, really?
Postby ldrcycles » Thu Aug 02, 2012 7:47 pm
The fit is really good, the adjuster actually feels alright to use (i had a cheap helmet when i first started riding that had a rubbish adjuster, very flimsy) and above all else, it has the AS sticker.
In spite of the lack of vents at the back i haven't noticed any difference between it and my previous helmet, but the 2 rides i've done so far were both quite cool.
Oh and in case anyone thinks i'm on Big W's payroll, i bought a plastic mini pump a couple of weeks ago when i couldn't find my Lezyne pump and wanted to have one with me on a ride, it didn't work AT ALL. At least they refunded it no worries.
- bychosis
- Posts: 7244
- Joined: Sat Jan 14, 2012 1:10 pm
- Location: Lake Macquarie
Re: So how bad is a Big W bike, really?
Postby bychosis » Thu Aug 02, 2012 9:07 pm
- hazmat5765
- Posts: 195
- Joined: Sun Mar 15, 2009 11:29 pm
- Location: Coffs Harbour NSW
Re: So how bad is a Big W bike, really?
Postby hazmat5765 » Fri Aug 03, 2012 12:09 am
Cheers, Rob.
- ldrcycles
- Posts: 9593
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: So how bad is a Big W bike, really?
Postby ldrcycles » Fri Aug 03, 2012 9:46 am
If you're looking at buying one, remember the 2 rules of Preset ownership-
1) Strip it down and reassemble all bearings before riding.
And 2) Replace the freewheel asap. (Following on from diga's experience and my impression of it, a new reputable freewheel is cheaper than new teeth).
- hazmat5765
- Posts: 195
- Joined: Sun Mar 15, 2009 11:29 pm
- Location: Coffs Harbour NSW
Re: So how bad is a Big W bike, really?
Postby hazmat5765 » Fri Aug 03, 2012 10:28 am
Thanks mate, I've been following and enjoying this thread and have built up a collection of bits and pieces including an ACS and Dicta freewheel ready for fitting. Rob.ldrcycles wrote: 1) Strip it down and reassemble all bearings before riding.
2) Replace the freewheel asap.
- twizzle
- Posts: 6402
- Joined: Wed Aug 13, 2008 11:45 am
- Location: Highlands of Wales.
Re: So how bad is a Big W bike, really?
Postby twizzle » Fri Aug 24, 2012 11:30 pm
Then I started looking more closely after I'd gotten it home. After 2.5 hours in the shed, the only moving parts not touched were the pedals and brake levers. Some bearings had grease, some had none... wheel and BB bearings were overtightened, the headset was loose. It actually qualifies as a 'bike' now, but it was worse than expected. The coaster brake rear hub still drags, not much more I could do about that other than gut it, and I couldn't work out how to do that. Besides which, the front/rear brakes are crap.
The big disappointment was that my spare Tektro dual-pivot long-reach calipers were about 3mm too short to fit. They looked awesome for a dummy fit.
And it's lucky I have all the tools, most households would have been screwed trying to make a bike like this rideable.
Sent from my iThingy...
...real cyclists don't have squeaky chains...
- ldrcycles
- Posts: 9593
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: So how bad is a Big W bike, really?
Postby ldrcycles » Sat Aug 25, 2012 9:13 am
-
- Posts: 15
- Joined: Tue Sep 11, 2012 6:51 pm
Re: So how bad is a Big W bike, really?
Postby cameroncyc » Tue Sep 11, 2012 6:59 pm
Had the same issues with the brakes that squeal..but has anyone had the issue with the shudder in the front wheel at speed (it feels like the bike is going to slide out from under me). Any ideas on a fix?
Considering I am new to this, and don't have a lot of the requisite tools for cranks etc, may I be better to start with more aesthetic issues such as bars, or is this for naught if the cranks aren't right?
Sure there will be plenty of questions.
- ldrcycles
- Posts: 9593
- Joined: Thu Oct 28, 2010 3:19 pm
- Location: Kin Kin, Queensland
Re: So how bad is a Big W bike, really?
Postby ldrcycles » Wed Sep 12, 2012 7:29 pm
Changing the cranks is cheap and will lop off a HEAP of weight, and if you have a set of vice grips all you need to work on the cranks is a crank extractor (about $15 from your local bike shop). Now yes vice grips are not perfect but when i've been caught out they will do the job. If you need any guidance with the process i can take some pics the next time i strip a bike.cameroncyc wrote:Just came across this, bought a Preset a little while back and have been riding it stock since. Seeing the pics has inspired me to do what I bought the bike for, to modify it. Looks like the crank will be first to change and then bars, but slowly slowly, last bike I worked on when I was 10, which is decades ago...
Had the same issues with the brakes that squeal..but has anyone had the issue with the shudder in the front wheel at speed (it feels like the bike is going to slide out from under me). Any ideas on a fix?
Considering I am new to this, and don't have a lot of the requisite tools for cranks etc, may I be better to start with more aesthetic issues such as bars, or is this for naught if the cranks aren't right?
Sure there will be plenty of questions.
If you read back through the thread, i think on the second page, i noticed the shimmy on my first ride, i don't think it's anything actually wrong, just maybe a steep head angle. When i'm getting into the 50s or more i have found it a bit twitchy, other than swapping the forks for some that are longer, i don't there's much to be done about it (besides staying under 50 ish).
There's nothing wrong with the cranks, they're just very heavy. It depends on what your area is like, if you have a bit of climbing then dropping weight will make a difference, in which case swap out the cranks, but if you're not going flat knacker i would just pretty it up, make it what you want.
-
- Posts: 536
- Joined: Fri Apr 17, 2009 5:18 pm
- Location: Northcote
Re: So how bad is a Big W bike, really?
Postby misterhorsey » Wed Sep 12, 2012 8:28 pm
I guess you're supplying the quality that has been stripped out of the supply chain with cheap chinese manufacturing and silly Australian retail pricing.
-
- Posts: 15
- Joined: Tue Sep 11, 2012 6:51 pm
Re: So how bad is a Big W bike, really?
Postby cameroncyc » Wed Sep 12, 2012 9:33 pm
Changing the cranks is cheap and will lop off a HEAP of weight, and if you have a set of vice grips all you need to work on the cranks is a crank extractor (about $15 from your local bike shop). Now yes vice grips are not perfect but when i've been caught out they will do the job. If you need any guidance with the process i can take some pics the next time i strip a bike.
If you read back through the thread, i think on the second page, i noticed the shimmy on my first ride, i don't think it's anything actually wrong, just maybe a steep head angle. When i'm getting into the 50s or more i have found it a bit twitchy, other than swapping the forks for some that are longer, i don't there's much to be done about it (besides staying under 50 ish).
There's nothing wrong with the cranks, they're just very heavy. It depends on what your area is like, if you have a bit of climbing then dropping weight will make a difference, in which case swap out the cranks, but if you're not going flat knacker i would just pretty it up, make it what you want.[/quote]
Yeah, thanks for that. I have a few hills around here so the weight will probably be the issue that I tackle first (after a good grease fest), will have to look around and find some good light cranks, whilst sticking to a budget, the Lasco ones from earlier in the thread still look like they are there so I might grab some of them.
I have been really surprised by this bike, out of the box it has been comfortable and really I am only changing it to suit personal preference, rather than any real issue with it.
Return to “Buying a bike / parts”
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Cycling Brands
- Cannondale
- Garmin
- Giant
- Shimano
- Trek
Who is online
Users browsing this forum: No registered users
- All times are UTC+11:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.