Front Deraileur washer/spacer missing

Workshop tales, trials and disasters.
Maintenance tips, techniques and myths.
Technical discussion, description and outright lies

Front Deraileur washer/spacer missing

Postby adrian_d » Thu Aug 23, 2012 8:52 am

Hi all,

I am putting together my bike at the moment and noticed that the bolt that goes through the brazed on plate and into the front deraileur is too long and bottoms out. I have noticed that in pictures online that there is a washer/spacer that goes inbetween the bolt and the brazed on plate to make sure that the bolt doesn't bottom out.

Is this washer/adaptor available at most LBS?

Thanks ya'll
REVISED GOALS FOR THIS/NEXT YEAR
2. Attend 250km Bupa 2014

My Cycling Journey Blog (Needs Updating)
User avatar
adrian_d
 
Posts: 508
Joined: Wed Jun 20, 2012 8:14 am

Return to The Shed

Who is online

Users browsing this forum: No registered users



Support BNA
Click for online shops
Torpedo 7 Torpedo7 AU
Ground Effect Ground Effect NZ
Chain Reaction Cycles CRC UK
Wiggle Wiggle UK
Cycling Express Cycling Express
Ebay Ebay AU
ProBikeKit ProBikeKit UK
Evans Cycles Evans Cycles UK
JensonUSA Jenson USA
JensonUSA Competitive Cyclist