Dura ace c50 vs zipp 404

User avatar
albertgaleano
Posts: 199
Joined: Sun Nov 20, 2011 9:12 pm
Location: Brisbane

Dura ace c50 vs zipp 404

Postby albertgaleano » Sat Aug 25, 2012 1:05 pm

i got my heart set on some duraace c 50 clinchers and went to my lbs to have a bit of a drool and they have some zipp 404 with alum braking surface they could offer me for a bit cheaper, anyone ride on the zipps and do they think they are better than the duraace?
Image

jcjordan
Posts: 1094
Joined: Sat Nov 08, 2008 3:58 pm

Re: Dura ace c50 vs zipp 404

Postby jcjordan » Sat Aug 25, 2012 6:22 pm

Zipp wheels with the alloy track have q bad rep for cracking around the nipples. I have seen one occassion where the breaking track lifted on a long climb.

Plus zipp hubs are crap.

The C50's are quite abut heavier bur are more durable.

Sent from my HTC Sensation Z710a using Tapatalk 2
James
Veni, Vidi, Vespa -- I Came, I Saw, I Rode Home

marinmomma
Posts: 2039
Joined: Mon Jul 26, 2010 2:12 pm
Location: Southside Brisbane

Re: Dura ace c50 vs zipp 404

Postby marinmomma » Sat Aug 25, 2012 6:38 pm

Mr MM has a set of Zipps which wont get a good review from me sorry to say, however his pair could be a complete pair of lemons as his mate as a set and hasn't had a problem.
Mr MM's on the other hand have had both rims replaced, rear wheel keeps going out of tru even after going back to Zipp for repair...and on todays ride the rear hub failed in an epic way breaking 3 spokes in the process and causing paint damage to his frame :roll:

Zipp have been very good and repaired the past problems however they're going to have to come through in a big way after today :|
Lisa

User avatar
albertgaleano
Posts: 199
Joined: Sun Nov 20, 2011 9:12 pm
Location: Brisbane

Re: Dura ace c50 vs zipp 404

Postby albertgaleano » Sat Aug 25, 2012 8:57 pm

I think i might wait a bit to find out a bit more about the zipp's, How about Fast forward f6r how are these compared to the other wheels????
Image

Dr_Mutley
Posts: 2531
Joined: Fri Jan 11, 2008 2:28 pm
Location: Flagstaff Hill, Adelaide SA 5159

Re: Dura ace c50 vs zipp 404

Postby Dr_Mutley » Sun Aug 26, 2012 12:31 am

Have both... Similar performance, vastly different quality....

I have found the 188 zipp hubs to be total crap... U will find my pics here on the forum of 2 rear 188 hubs which have self destructed... Echelon sports have been just ok with their support...

Conversely the C50s have been good, I did have a problem with the rear rim of my C50s (7850)... Sent them back after 18months and Shimano Aust replaced them no questions asked with a new 7900 set... Can't argue with that...

Another wheelset to consider is some ENVE rims laced to a good hub... Ie Alchemy, Chris King, DT Swiss or the like... Would out perform both the above, for not too much more...

pawnii
Posts: 536
Joined: Wed May 26, 2010 2:54 pm
Location: Macleod, Melbourne
Contact:

Re: Dura ace c50 vs zipp 404

Postby pawnii » Sun Aug 26, 2012 1:04 am

+1 for Enve but they don't make hoops with aluminium brake surface.

I'm guessing the OP wants wheels with aluminium brake surface since both the C50 and 404 clinchers have them.
yes, I'm an overweight weight weenie
2012 Scott Foil Premium

pawnii
Posts: 536
Joined: Wed May 26, 2010 2:54 pm
Location: Macleod, Melbourne
Contact:

Re: Dura ace c50 vs zipp 404

Postby pawnii » Sun Aug 26, 2012 1:09 am

How about Fast forward f6r how are these compared to the other wheels????
Fast Forward are owned by Campagnolo so I would guess quality would be pretty good.
yes, I'm an overweight weight weenie
2012 Scott Foil Premium

marinmomma
Posts: 2039
Joined: Mon Jul 26, 2010 2:12 pm
Location: Southside Brisbane

Re: Dura ace c50 vs zipp 404

Postby marinmomma » Sun Aug 26, 2012 11:49 am

Dr_Mutley wrote:
I have found the 188 zipp hubs to be total crap... U will find my pics here on the forum of 2 rear 188 hubs which have self destructed... Echelon sports have been just ok with their support...

...
Will see how we go, lbs is contacting them on our behalf....both wheels have already had the rims replaced!
Our friends has the same wheel set, rides the same roads at a similar intensity and his haven't had a problem...I think Mr MM's might be the odd pair of lemons!
Lisa

User avatar
albertgaleano
Posts: 199
Joined: Sun Nov 20, 2011 9:12 pm
Location: Brisbane

Re: Dura ace c50 vs zipp 404

Postby albertgaleano » Sun Aug 26, 2012 3:43 pm

Well, iam after something with an alum braking surface and lbs would offer me a great price for the zipps, as i would prefer to buy from them instead of online, just with the mixed review on them just not to sure???? I currently use Mavic Ksyrium Elite and would like to upgrade my road bike so i can put the mavics on my commuter.
Image

User avatar
MarkG
Posts: 2147
Joined: Mon Mar 28, 2011 2:02 pm
Location: Perth, Australia

Re: Dura ace c50 vs zipp 404

Postby MarkG » Sun Aug 26, 2012 3:53 pm

DA are great all round clincher
Heavier but bullet proof.

Sent from my HTC One X using Tapatalk 2
Proudly "a hater of academics with helmet cams"

User avatar
brycerider
Posts: 166
Joined: Thu Aug 20, 2009 8:59 pm

Re: Dura ace c50 vs zipp 404

Postby brycerider » Sun Aug 26, 2012 8:17 pm

pawnii wrote:
How about Fast forward f6r how are these compared to the other wheels????
Fast Forward are owned by Campagnolo so I would guess quality would be pretty good.
As far as I know Fast Forward are a Dutch company not owned by Campag.

My lbs recommended enve over zipps. A wise choice - custom built on tune hubs with 45 mm rims. Been great.

Sent from my A500 using Tapatalk 2

pawnii
Posts: 536
Joined: Wed May 26, 2010 2:54 pm
Location: Macleod, Melbourne
Contact:

Re: Dura ace c50 vs zipp 404

Postby pawnii » Mon Aug 27, 2012 4:33 am

I was told Campy brought out FF a while ago by a bike mechanic so I could be wrong.

I have a set of custom built Edge/Enve 45 clinchers on Tune Mig45/Mag150 hubs also.
At 1239grams with Veloplugs they're very light for clinchers.
After 3yrs of flawless use I'd almost say they're as bombproof as DA wheels.

The 1663grams for the C50 and 1658grams for the 404s puts me off. These are manufacturer claimed weights, real weight would most likely be heavier.
I guess if you want aluminium brake surfaces and deep rims on clinchers there are no lightweight options.
yes, I'm an overweight weight weenie
2012 Scott Foil Premium

toppity
Posts: 998
Joined: Tue Aug 10, 2010 10:08 am
Location: West Gippsland, Victoria

Re: Dura ace c50 vs zipp 404

Postby toppity » Mon Aug 27, 2012 11:58 am

I have a pair of both, but in the tubluar variety. I'm a big bloke and have no trouble with either. If I was told to choose I would go with the Zipps tbh. They seem to roll better and are definately better in a cross wind. Both are very good though.
I ride several bicycles, but not at once.

marinmomma
Posts: 2039
Joined: Mon Jul 26, 2010 2:12 pm
Location: Southside Brisbane

Re: Dura ace c50 vs zipp 404

Postby marinmomma » Tue Aug 28, 2012 5:09 pm

Update re the Zipps...Mr MM took them in to the distributor today, the hubs on both wheels are going to be replaced with the latest version and the spoke nipples are getting an upgrade as well....so far the service has been good, let's hope that is the last problem with these wheels!
Lisa

marinmomma
Posts: 2039
Joined: Mon Jul 26, 2010 2:12 pm
Location: Southside Brisbane

Re: Dura ace c50 vs zipp 404

Postby marinmomma » Tue Sep 04, 2012 8:18 pm

marinmomma wrote:Update re the Zipps...Mr MM took them in to the distributor today, the hubs on both wheels are going to be replaced with the latest version and the spoke nipples are getting an upgrade as well....so far the service has been good, let's hope that is the last problem with these wheels!

Update, the wheels came back today, it looks like they've been completely replaced....Mr MM had a 303/404 set and now both wheels are 404's.

Pretty happy with that! Proof will be if they stay problem free :wink:
Lisa

diga
Posts: 8
Joined: Sat Apr 28, 2012 8:33 am

Re: Dura ace c50 vs zipp 404

Postby diga » Wed Sep 19, 2012 6:05 pm

may i ask how much the lbs was selling the zipps for?

User avatar
albertgaleano
Posts: 199
Joined: Sun Nov 20, 2011 9:12 pm
Location: Brisbane

Re: Dura ace c50 vs zipp 404

Postby albertgaleano » Wed Sep 19, 2012 9:43 pm

diga wrote:may i ask how much the lbs was selling the zipps for?
the 404 clinchers for $1650 here in brissy
Image

diga
Posts: 8
Joined: Sat Apr 28, 2012 8:33 am

Re: Dura ace c50 vs zipp 404

Postby diga » Thu Sep 20, 2012 5:53 am

mmm...what did you end up getting?i am also in brissie which shop is that?im trying to find hed 6 localy

MDL
Posts: 320
Joined: Wed Mar 17, 2010 1:18 am
Location: Toowoomba QLD

Re: Dura ace c50 vs zipp 404

Postby MDL » Fri Sep 21, 2012 6:47 am

diga wrote:mmm...what did you end up getting?i am also in brissie which shop is that?im trying to find hed 6 localy

Tried Cyc'ed?

MDL
Image

User avatar
albertgaleano
Posts: 199
Joined: Sun Nov 20, 2011 9:12 pm
Location: Brisbane

Re: Dura ace c50 vs zipp 404

Postby albertgaleano » Sat Sep 22, 2012 4:08 pm

+1 for cyced for bikes, have a great price for the dura ace wheels as well.
Image

Benny_SL
Posts: 42
Joined: Fri Nov 30, 2012 11:56 am

Re: Dura ace c50 vs zipp 404

Postby Benny_SL » Tue Jan 08, 2013 4:21 pm

I have a set of Dura Ace C50's and cannot complain. I ride them everyday and they're bullet proof.

Next set for me will be the HED JET 5 Express. They're about $1600 a set but have an 88kg weight limit.

Who is online

Users browsing this forum: No registered users