SRAM compatible gear and brake cables

User avatar
Posts: 4094
Joined: Fri Mar 19, 2010 11:18 am
Location: Sydney

SRAM compatible gear and brake cables

Postby hannos » Tue Aug 28, 2012 1:58 pm

What cables / housings are recommended for SRAM Red brakes and derailleurs? Is Yokozuna still the bees knees?
2010 BMC SLC01

User avatar
Posts: 2237
Joined: Fri Apr 09, 2010 9:52 am
Location: Somewhere flat...

Re: SRAM compatible gear and brake cables

Postby silentbutdeadly » Wed Aug 29, 2012 8:57 am

Yokozuna seems to be the preference though I run the Jagwire Racer and/or Gore Low Friction (not the sealed) with no worries and they are both much cheaper...
Ours is not to reason why...merely to point and giggle

User avatar
Posts: 2653
Joined: Tue Apr 21, 2009 2:00 pm
Location: Perth

Re: SRAM compatible gear and brake cables

Postby jaseyjase » Thu Dec 20, 2012 12:08 am

Yokozuna for me too :mrgreen:


Posts: 831
Joined: Thu Jan 05, 2012 11:30 am
Location: Melbourne

Re: SRAM compatible gear and brake cables

Postby __PG__ » Tue Apr 16, 2013 10:52 am

I just got some new SRAM Force shifters and pulled the SRAM cables out and replaced them with Yokozuna cables. I'm a bit concerned that the left shifter (10-speed ratchet) doesn't seat the cable end properly. SRAM instructions say to give the cable a good 'yank' to ensure the cable end is correctly seated in the red housing attached to the ratchety. I've given the cable a good pull, yet if I run up and down the ratchet the cable end can come loose.

Has anyone observed this with Yokozuna cables? (Or any other cables for that matter?) Is it a problem once the cable is clamped to the rear derailleur?
1994 Cecil Walker (now retired)
2013 Baum Corretto
2014 Cell Awaba 1.0

Who is online

Users browsing this forum: No registered users