jules21 wrote: i have one of these, with the battery pack (as shown). i can't seem to get the camera to record, when the battery pack is plugged in. is this normal? or am i doing something wrong?
I read somewhere that the charger cable is wired in specific and differing ways between 808/Jumbo camera models, so a battery pack for a 808 #16 doesn't work in a Jumbo (or 808 #11). It could be that, which means wasted money for you (but if it turns out you have a "808 #16" battery pack, I'd be interested). Cant remember where sorry but one ebay seller of these cameras sells chargers specific to each model Link Jumbo, Link #16.
Another possibility is that you may have to do a different key press sequence when recording while charging. GraemeL?
Marto wrote: I read somewhere that the charger cable is wired in specific and differing ways between 808/Jumbo camera models, so a battery pack for a 808 #16 doesn't work in a Jumbo (or 808 #11).
they were sold together so i'm guessing not that. it's an 808 #11
Marto wrote:Another possibility is that you may have to do a different key press sequence when recording while charging. GraemeL?
sounds possible. hitting the big button at the front activates record without the external battery connected. in that case, the orange light is on, but switches off when recording starts. with the external battery connected, the orange light stays on and doesn't go off when hitting the record button - neither does it record. so plugging the external battery in somehow blocks the recording operation?
Just wanted to mention another camera, similar to the GoPro.
It is called the CamOne Infinity - It is similar in size to a GoPro, but has more functionality, and is a bit cheaper too. It comes with an LCD screen as standard.
I bought one for my trip to Hawaii, and used it underwater, as well as ziplining - worked really nicely, and has more buttons than a GoPro.
lump_a_charcoal wrote:Just wanted to mention another camera, similar to the GoPro.
It is called the CamOne Infinity - It is similar in size to a GoPro, but has more functionality, and is a bit cheaper too. It comes with an LCD screen as standard.
I bought one for my trip to Hawaii, and used it underwater, as well as ziplining - worked really nicely, and has more buttons than a GoPro.
Well, getting it all working is quite a lengthy process and I would advise anyone attempting it to READ THE INSTRUCTIONS CAREFULLY.
First, you need to make sure you have the latest version of GoPro Cineform Studio installed on your computer, or update it if not. Then you have to update the GoPro software. Followed by the WiFi BacPac software. And finally, the Remote software.
It's very important to ensure the bacpac and remote are fully charged before attempting the updates. And when updating the remote, take heed of the instructions to disconnect the charging cable (this is why the battery must be fully charged).
I didn't read the instructions properly and didn't disconnect the charging cable from the Remote. It took several retries before I succeeded in establishing the connection and installing the update.
Note that getting the remote to sync with the bacpac takes a few minutes so you just have to be patient.
Lots of complaints on the www from people who have stuffed it up and can't get the remote to connect. But mine is working just fine now...
Well, getting it all working is quite a lengthy process and I would advise anyone attempting it to READ THE INSTRUCTIONS CAREFULLY.
First, you need to make sure you have the latest version of GoPro Cineform Studio installed on your computer, or update it if not. Then you have to update the GoPro software. Followed by the WiFi BacPac software. And finally, the Remote software.
It's very important to ensure the bacpac and remote are fully charged before attempting the updates. And when updating the remote, take heed of the instructions to disconnect the charging cable (this is why the battery must be fully charged).
I didn't read the instructions properly and didn't disconnect the charging cable from the Remote. It took several retries before I succeeded in establishing the connection and installing the update.
Note that getting the remote to sync with the bacpac takes a few minutes so you just have to be patient.
Lots of complaints on the www from people who have stuffed it up and can't get the remote to connect. But mine is working just fine now...
I can vouch for DDM's great service. Spent many a paycheck there...
jules21 wrote: i have one of these, with the battery pack (as shown). i can't seem to get the camera to record, when the battery pack is plugged in. is this normal? or am i doing something wrong?
How are you connecting it and what lights if any are on? Are you only pressing the power button once and the record button once?
When the camera is connected to the battery, the little light on the camera will be a steady red colour, press the power button and an orange light will come on. It may be hard to see because the red light is always on behind it, press the record button and the light will glow red again.
If you look at the light at an angle, you should see the two lights on.
Graeme
***Looking For Information About Bicycle Cameras ***
Part of of my (perhaps ill-advised) k-edge bling cash splash has arrived - the GoPro mount. Will test it out today.
I've finally settled on a handlebar mount right next to the stem. Helmet mount made me feel like I'm on a roller coaster when watching it and the bottom of the drops position had a lot of vibration. So far the next-to-stem mount seems to be good. I'm hoping that replacing 3 plastic components with an alu one will improve things again. Interestingly, the K-Edge handlebar mount screws specify 2Nm max. That's not a lot...
chucknitro wrote:Please tell me you knocked it on something solid...
I couldn't get back sooner. It hasn't failed of its own accord however I didn't feel for that the force of the impact into soft dirt should be enough to fracture a $60 mount. As an aluminium mount it isn't as malleable as steel so will fracture rather than deform, though exactly at the point where it failed is a screw that goes through the middle, so a weak point.
On the roadbike I specifically mounted it under than handlebars once I found a way to get through the cable spagetti and have a clear view.
In short I felt that the knock it did receive was quite light to have this result considering it is a $60 mount however will have to await the verdict and see if the retailer agrees, I did provide a photo and they did ask me to send it in.
I would love to hear from you if you are interested in sharing your story/footage. I am in touch with a PR company who have found this angle interesting, sports cameras used for safety/evidence by cyclists as opposed to just sports. Just send me a PM or email: [email protected] and one or two sentences on your experience.
I have just gone through the process with my GoPro HD Original and trying to connect the remote. I found the following video helpful, it concentrates on the HD2 though watch it as it referes to the original as well.
Here are my tips for Setup/Connecting the Wifi Backpack - Run a firmware update - on the GoPro Original it is done manually by downloading an update and putting it on the SD card. Instructions are on the download page
- I started (after a firmware update) by following the handbook instructions which did not work - I couldn't get the WFI menu, so instead of continuing, spotted the helpful video (posted below).
- The (free) Cineform studio software was required. I don't actually need it for editing though to connect up the wifibackpack and sync thr remote control it was required. Follow the instructions in the video.
- It took a number of times until the wifi backpack successfully updated. I was getting error messages and on the third time it worked.
I have just done simple testing only but the remote is exactly what will make my life easier. On the remote you can see an icon with the mode (film, photo, tripleshot photo, timer) which is incredibly handy AND when filming a red LED flashes on the remote.
Sweet As The remote will turn the camera on and off. Saving battery time is a bit concern when on long trips so in this respect it is a complete solution.
Missing In Action - My budget doesn't stretch as far for a new GoPro Hero 2 and it is a shame to miss out on the smart phone capabilities which for me is to line up the shot (checking the framing)
AUbicycles wrote:Near Misses in traffic or Crashes on Video?
I would love to hear from you if you are interested in sharing your story/footage. I am in touch with a PR company who have found this angle interesting, sports cameras used for safety/evidence by cyclists as opposed to just sports. Just send me a PM or email: [email protected] and one or two sentences on your experience.
Christopher, are you able to give an indication of what the PR company wants it for?
AUbicycles wrote:On the GoPro Wifi backpack, thanks RonK.
I have just gone through the process with my GoPro HD Original and trying to connect the remote. I found the following video helpful, it concentrates on the HD2 though watch it as it referes to the original as well.
Here are my tips for Setup/Connecting the Wifi Backpack - Run a firmware update - on the GoPro Original it is done manually by downloading an update and putting it on the SD card. Instructions are on the download page
- I started (after a firmware update) by following the handbook instructions which did not work - I couldn't get the WFI menu, so instead of continuing, spotted the helpful video (posted below).
- The (free) Cineform studio software was required. I don't actually need it for editing though to connect up the wifibackpack and sync thr remote control it was required. Follow the instructions in the video.
- It took a number of times until the wifi backpack successfully updated. I was getting error messages and on the third time it worked.
I have just done simple testing only but the remote is exactly what will make my life easier. On the remote you can see an icon with the mode (film, photo, tripleshot photo, timer) which is incredibly handy AND when filming a red LED flashes on the remote.
Sweet As The remote will turn the camera on and off. Saving battery time is a bit concern when on long trips so in this respect it is a complete solution.
Missing In Action - My budget doesn't stretch as far for a new GoPro Hero 2 and it is a shame to miss out on the smart phone capabilities which for me is to line up the shot (checking the framing)
Ok this is what I did Already had Cineform Studio installed and had my GoPro firmware upgraded. When I got my wifi backpack tested it and got it connect. Went to ride with it, do you think it would connect.... NOPE So got home and read the manual... YES read the manual!!! OK so need to connect to the computer OK... Do that OH cineform has an update. Update it, OK unplugged wifi backpack and plug it back in, YES picked up. OK Oh it has a default password. Change it!!! Plugged the remote in and it connected it for me. Tested it works, go riding and works and very very handy. Next gotta get my phone hooked up to it.
AUbicycles wrote:Near Misses in traffic or Crashes on Video?
I would love to hear from you if you are interested in sharing your story/footage. I am in touch with a PR company who have found this angle interesting, sports cameras used for safety/evidence by cyclists as opposed to just sports. Just send me a PM or email: [email protected] and one or two sentences on your experience.
Christopher, are you able to give an indication of what the PR company wants it for?
Please tell us it's not someone like ACA doing a cyclist beat up like last week's crap....
For near misses in traffic - just direct them to the moron mororists thread here. I'm sure there are zillions reported...
Just locked the moron motorist thread, it wasn't very nice in there.
Early days yet and for anyone involved I will make sure they are in the know and I have their OK's but the starting point is the review of a sports action camera and on discussion the PR company was interested in the angle of camera's for evidence/security/documentation as opposed to just cool action footage, a new angle and so now is the ground work to get some stories together and see what can be done.
