The swap meet thread

[vaeske]

i think i have one sitting in my ammo box doing nothing but gathering dust...all yours. I'll bring it on sat.

[Wal42]

I'm riding in on Saturday.

I'll talk to you about it then, I may have to pick it up at a later stage, I'm not in a hurry. Got 2 MTB's here that I've got to build, but only 1 needing a fork, so it ain't urgent.

[vaeske]

got rid of quite a few things and the mrs is quite a fair bit happier.

Here's an update.

To Trade:

Apollo Allegro Frame with cane creek headset and drop handlebars
Mavic ma2cd2 tubular rim 32H
Suntour Superbe front brake calliper - nutted

Maillard Front Hub 36H – no skewer
Shimano 105 Rear Hub 32H
GPM Sprint Front Hub 32H

Shimano 105 BL-1050 non aero brake levers
Shimano 105 DT Shifters
Shimano 105 HB-1050 F&R hubs
Shimano 105 RD-1050 rear derailleur
Shimano 105 PD-1056 Look patent pedals X2

Shimano 600 fd-6207 front derailleur
Shimano 600 rd-6208 rear derailleur

25.8mm seat post 300mm length X 2
26.6mm seat post 250mm length (gone to wal)
30.0mm seat post 250mm length - silver with attachment

Campagnolo
Xenon – F&R derailleur
Mirage – Dual pivot brake calipers - recessed
Shamal Road Hubs Front & Rear 16H

Continental Gatorskin 700X25c tyre brand new in box
Avocet RS Saddle
Cronos Gitane Yellow, white and black saddle

Looking for:

Wolber TX Profile clincher rim 32H X2
Velocity Aerohead black clincher rim 32H
Shimano 600 6207 rear hub
Campagnolo triomphe brake levers
1 X Campagnolo Super Record brake lever (retro one with drilled lever) - any condition.
Continental Force 700X23c/24c tyre
Continental GP4000 700X23c tyre

[Kermit TF]

Hi all
Im chasing some suntour downtube aero levers from 82-86 ish prefer clamp on.
I can trade 2 pet rabbits and a breville sandwich maker

[vaeske]

Hi all
Im chasing some suntour downtube aero levers from 82-86 ish prefer clamp on.
I can trade 2 pet rabbits and a breville sandwich maker

If i recall correctly kermit, Wal42 was hoping to get rid of a set of dt suntour shifters. maybe pm him?

[Wal42]

Not entirely correct vaeske, but pretty close.

My stuff is not clamp on so this may sink any ideas BUT,


The plastic Suntour Blaze shifters on my Vertex build are heavier than I'd like, I have set of Al Suntour Edge shifters (thanks wazza) but they are missing the R/H (rear derailleur) tension knob & they are part of a full groupo (so I'm not keen to split it up) BUT (there's always a but isn't there), I purchased a set of Al Suntour shifters from a guy in Bathurst (NSW) today, I'm looking at fitting those to the Vertex, so the Blaze shifters will be surplus. Now you could probably have them but you would have to find a tension knob (the Blaze ones match the Edge ones) & I'm not pulling the shifters off for about a fortnight.

If you are interested & someone can help you out with a R/H plastic tension knob, then give me a yell, I'm sure we can work out getting them to you for a small amount.

[utedeej]

Vaeske, Campy brakes and levers arrived safely thanks. Hope you enjoy the wheels, they'll look cracker polished up . What is the track bike you will put them on?

[utedeej]

Got a bunch of stuff to trade, but it's going to take a while to list it all. Will start with the rims and add to it. Located in Bris-Vegas.
Looking for:
Suntour Superbe Pro rear derailleur - Accushift era
58cm road frame, cro-mo or better
Chromed alloy or polished alluminium road fork, 200mm steerer
Malvern Star Team 86 Funny Bike (yellow/green)

Cheers.

Funnybike, still looking for a 58 cm frame. I've got a couple that i'm looking to part ways with. One is an unknown chromo frame, 26.8 seattube, with unicrown fork, great condition blue paint. The other is a Vicini, italian frame. Not as beautifully made as other Italian frames that i've seen. White frame with yellow highlights in the corners. Paint not as good as other, with a seatpost of 26.6? Utedeej

[munga]

got rid of quite a few things and the mrs is quite a fair bit happier.

Here's an update.


Looking for:


Velocity Aerohead black clincher rim 32H

i think i have a used one of these. its the oldskool rounded profile, rather than the later 'v' profile, if you know what i mean.

[vaeske]

Vaeske, Campy brakes and levers arrived safely thanks. Hope you enjoy the wheels, they'll look cracker polished up . What is the track bike you will put them on?

thanks DJ,

likewise for the levers and brakes. my plan for the parts will be a steel track frame for day to day commuting. still looking for that ever so elusive one. I'm looking to offload the langster and the masi coltello as well but may keep one for the track for later.

got rid of quite a few things and the mrs is quite a fair bit happier.
Here's an update.
Looking for:
Velocity Aerohead black clincher rim 32H

i think i have a used one of these. its the oldskool rounded profile, rather than the later 'v' profile, if you know what i mean.

Well aren't you a nice boy...thanks mang! that would be super fantastic for for DA front hub. bring it on sat when you pick us up

[utedeej]

still looking for that ever so elusive one.

Hi Vaeske, what size frame are you looking for? I've got a Carl Wilson track frame, that i'll be looking to dispose of some time in the future. V nice frame & light, 27.2 seatube, 56 seat tube and 55 top tube i think. Original paint was knackered, so powdercoated in orange. Got a set of road forks done at the same time, so it's got an extra set of forks to use with a front brake for riding around town She has some nice drill work on the bottom bracket and where the stays join on to the seattube, and on the track fork.

Happy to send pics, but i'm heading off on hols on Friday (actually up to Gold Coast then Buderim). So, will be out of action for two weeks.

[vaeske]

^ oh what are you doing to me? now i like it...

[utedeej]

^ oh what are you doing to me? now i like it...

Sorry dude, maybe you can pass on the favour to someone else by doing the same

[spirito]

It's time folks

Taylor Square, Darlinghurst ... near the Art College. Details below ...

[LG]

Help please - I started putting my concorde together and have run into some issues with my shifters. As per the 1st photo, I seem to have 2 left side campag record downtube shift levers. Being slightly offset, the right hits the frame when in the parallel position. As per the second photo, I also have 2 diferent campag washers for the shifters . I would be eternally greatful if somebody could help me out here. If you have a right shift lever, that you don't need it would be most appreciated, and if you have a washer the same as the one on the left you don't need, that would also be fantastic. Happy to swap something if you like.



I have also now realise the campag bottom bracket spindle I have is also rough. Not 100% sure what model it is, but it's for an Italian thread, is about 115mm long and is stamped 70 - SS. Maybe somebody can help for a trade of another item? EDIT: It appears to be a nuovo record BB.

[vaeske]

hey pal, i should have a right shifter on my keyring if you're interested. can't do much about those plastic washers though. i would've thought if you actually have 2 of each washer then then its basically correct.

[LG]

That would be appreciated. The washers above are actually the steel cover plates which sit outside the nylon washer and the tension screw with D ring pushes on these. The one with the round hole appears to be the correct one. The one on the right with rectangular slot works ok, but is just diferent.

[vaeske]

^pm'd u bud.

updated stuff for trade.

Apollo Allegro Frame 54cm with cane creek headset and drop handlebars

SEMI GROUP -
Shimano 105 BL-1050 non aero brake levers
Shimano 105 DT Shifters
Shimano 105 HB-1050 F&R hubs
Shimano 105 RD-1050 rear derailleur
Shimano 105 PD-1056 Look patent pedals

Continental Gatorskin 700X25c tyre brand new in box
Mavic Reflex SUP clincher rim 32H - gold anodised
Avocet RS Saddle very similar to Selle Italia Turbo

Shimano SL-A500 Downtube shifters (grey) 7 speed
Shimano SL-6401 Downtube shifters (right only, silver) 8 speed

Shimano 600 fd-6207 front derailleur 26.8mm clamp
Shimano 600 rd-6208 rear derailleur - capable of index shifting

Carnac Impact Cycling Shoes size 39
vintage look pedals used (red)
vintage Exus E-1 pedals Look patent
Shimano 105 PD-1056 Look patent pedals

17T Freewheel - GHIWEI 1x1/8 - 2 prong gold
18T Freewheel - GHIWEI 1x1/8 - 2 prong gold
18T Freewheel - 1/2 X 1/8 - 4 prong silver

25.6mm seat post 250mm length
25.8mm seat post 300mm length X 2
30.0mm seat post 250mm length - silver with attachment

Ritchey WCS Axis 44 Stem - Wet White 100M 31.8mm 6/84 degree

Belleri Criterium Drop Bars 26.0 - without grooves
Cinelli Touch Drop Bars 26.0 - with grooves for cabling
Black Cinelli Vai Drop Bars 26.0 - with grooves for cabling
Modolo Brevatto Bars with 110mm Kalloy Stem

Maillard Low Flange Front Hub 36H – with Maillard skewer
Shimano 105 Rear Hub 32H - no skewer
Gipiemme Sprint Low Flange Front Hub 32H - no skewer
Shimano MTB Front and Rear Hubs 32H - no skewer (with mtb disc brake adaptor)
Shimano RSX Front and Rear Hubs 36H - with Skewers (Front skewer stuck)

Looking for:

Wolber TX Profile clincher rim 32H X2
Campagnolo omega 19 clincher rim 36H
Shimano 600 6207 rear hub 6 speed
Campagnolo Triomphe brake levers
Campagnolo Super Record brake lever (retro one with drilled lever) - more scratches the better!
Continental Force 700X23c/24c tyre
Continental GP4000 700X23c tyre

[pentlandexile]

Heads up, retro fiends, I'm still chasing a Campy bottom bracket. Post is on the Marketplace forum. Cheers.

[marc2131]

My old 50s Sydney-made Alcone road bicycle can't be ridden
After a long 85km jaunt a couple of weekends ago, one of it's old Mafac 'Racer' brake Eye-bolt assembly (holds the brake shoe to arm) sheared off. Been hunting around for a replacement but with not much luck. Either postage costs from US is ridiculous (Harris Cyclery) or seller on holiday (Bikeville.com).
The bike part is 456E.

[floody]

On offer:

NOS Veloce triple square taper cranks, no rings, late 90s.
HP-7410 JIS 1" Dura-Ace headset, test fitted only, as new
7400 Dura-Ace Hi-Flange 36h front hub, quick release (no skewer)
Pair tidy STX-RC hubs
Black Mirage 9 speed rear hub 36h NEW
26.6 Thomson inline post (will get length and report back)
Pair 700C 32h bronze Campagnolo Omicron rims, one with brake wear (lot of life left), one with little to no visible brake wear.
Early LX 9 speed/Sun Rhynolite 26" rim brake wheelset, VGC, black on rims a little dull but barely ridden on
S-works forged strongarm crankset, square taper 110 rings MTB type. Fitted only, not ridden.
Magura rim brake set, mismatched black/red pair
Manitou Mach 5 SX, base of one damper rod broken, otherwise in reasonable order, some stanchion wear, comes with full cartridge seal kit.
Purple Control Tech flat bars, were NOS,have been fitted for display only, VGC, super bright purple ano and etching.


Chasing:
28h 7400/7500 Dura Ace Hi-Flange FRONT hub
68/109 loose ball BB i.e. Dura-Ace, Hatta, Sugino 75.
26.6 aero post with setback, preferably Japanese, i.e. ax/600/dura-ace, Nitto etc.

120x0 mtb stem 1-1/8" suit early 90s mtb, e.g. Kore, Syncros, Control Tech, in good presentable condition
XT M737 canti brakes
Pair usable, presentable Mavic 121 or 217 SUP ceramic grey, any spoke count.
Pair XT M737 STI levers, cantilever brake, or pair M739 shift pods.

[funnybike]

Hey folks,

I'm looking for a 27.0mm seatpost. (Edit: Got one. Thanks)

[Wal42]

floody, I'm interested in the Omicron wheels, can you post a piccy & what you'd want for them (sent to Brissie) or PM me with details please.

[whitey_182]

On Offer:

Harden Bacon Slicer TrackHubs VGC 32/40hole
Shimano 105 Rear Derailleur 105SC RD-1055
Unknown 56cm road frame, 700c, columbus dropouts, very light!
Yellow Leather Concor Supercorsa (used condition)

Chasing:

Shimano 600 Tri-Colour Brake/shifters (GC)
Shimano 600 Tri-Colour rear derailleur
Vintage 27.2mm seatpost (shimano, nitto, but campagnolo preferred)
100mm quill stem, 25.4mm clamp (cinelli, nitto, shimano)
38cm road drops (cinelli, nitto...)
54cm sq good quality steel lugged road frame

[vaeske]

Whitey,

i've got:
Shimano 600 Tri-Colour Brake/shifters (GC)
Shimano 600 Tri-Colour rear derailleur
Vintage 27.2mm seatpost (Gipiemme with cutouts)
100mm quill stem, 25.4mm clamp (nitto)
38cm road drops (cinelli touch or belleri)

pm me and we can work something out.