Viner Campagnolo build

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Viner Campagnolo build

Postby Dan » Wed Sep 12, 2012 6:55 am

So, here's the thread for my current Viner build. Picked up a frame from fellow user vaeske - discussion on vintage/spec of the frame can be found here, so I won't repeat.

First off, this is not intended to be a perfect or full restoration - more, my first foray into bikes with gears. I briefly considered sourcing used elements, however I found a great deal on a 2011 Veloce groupset through Bike24, so that's what it's getting.

Frame is straight and neat - first job was to degrease, clean and clear coat to prevent any further surface rusting until such time as I can get it painted.

Picked up some Khamsins from Munga, and various other bits and pieces via the ebays, interwebs, etc.

Hope you enjoy - photos to be added shortly.

Dan

EDIT: updated link

BRLVR.v2
Posts: 725
Joined: Sat Jul 09, 2011 8:33 pm

Re: Viner Campagnolo build

Postby BRLVR.v2 » Wed Sep 12, 2012 9:25 am

Good starter for your first roadie build.

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner Campagnolo build

Postby Dan » Wed Sep 12, 2012 11:21 am

BRLVR.v2 wrote:Good starter for your first roadie build.
Hey thanks - I should post an update to the single speed from a few years back - still going strong!

BRLVR.v2
Posts: 725
Joined: Sat Jul 09, 2011 8:33 pm

Re: Viner Campagnolo build

Postby BRLVR.v2 » Wed Sep 12, 2012 12:53 pm

Not buying from poland then?

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner Campagnolo build

Postby Dan » Wed Sep 12, 2012 1:07 pm

Perhaps a Cilo - I haven't discounted it just yet.
I'm off to Germany in about 12 weeks though, so might see what I can pick up in person.

User avatar
pentlandexile
Posts: 473
Joined: Sat Jan 02, 2010 9:48 am
Location: Brisbane

Re: Viner Campagnolo build

Postby pentlandexile » Wed Sep 12, 2012 6:30 pm

Got any pictures?
Long day's journey into alt-bars

User avatar
munga
Posts: 7023
Joined: Mon Jan 28, 2008 3:17 pm
Location: wowe
Contact:

Re: Viner Campagnolo build

Postby munga » Wed Sep 12, 2012 8:54 pm

dan, i've got a couple of saddles for you to try:

san marco rolls
Image

selle italia turbo
Image

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner Campagnolo build

Postby Dan » Wed Sep 12, 2012 9:34 pm

Here's some photos from earlier this evening.

Image

Image

Image

And one mocked up with a very tall seat post, stem and the Khamsins

Image

Just enough clearance at the rear for 25s ;)

BRLVR.v2
Posts: 725
Joined: Sat Jul 09, 2011 8:33 pm

Re: Viner Campagnolo build

Postby BRLVR.v2 » Wed Sep 12, 2012 10:02 pm

diggerdantheman wrote: Just enough clearance at the rear for 25s ;)
Looking at those pics you could go 28's with those clearances.

I managed em on to the Vetta

Image

Image

Ride is sublime

User avatar
munga
Posts: 7023
Joined: Mon Jan 28, 2008 3:17 pm
Location: wowe
Contact:

Re: Viner Campagnolo build

Postby munga » Thu Sep 13, 2012 6:17 am

what pressure do you run on the 28mm duranos?

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner Campagnolo build

Postby Dan » Thu Sep 13, 2012 11:20 am

munga wrote:dan, i've got a couple of saddles for you to try:
hey, that's great! Wal's octavia wasn't super for me unfortunately, but perhaps I'm a bit partial to my san marco fase or whatever it is :)

Can I give one a blast on Raturday?

User avatar
munga
Posts: 7023
Joined: Mon Jan 28, 2008 3:17 pm
Location: wowe
Contact:

Re: Viner Campagnolo build

Postby munga » Thu Sep 13, 2012 11:53 am

i'll be bringing them then, so you can if you like.

BRLVR.v2
Posts: 725
Joined: Sat Jul 09, 2011 8:33 pm

Re: Viner Campagnolo build

Postby BRLVR.v2 » Thu Sep 13, 2012 1:04 pm

munga wrote:what pressure do you run on the 28mm duranos?
85 psi.

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner Campagnolo build

Postby Dan » Thu Sep 13, 2012 3:15 pm

So - thinking gun metal grey.

Like this, but with black decals (yellow border)....
Image

Image

Or perhaps white decals...

All photos via Caale

User avatar
munga
Posts: 7023
Joined: Mon Jan 28, 2008 3:17 pm
Location: wowe
Contact:

Re: Viner Campagnolo build

Postby munga » Fri Sep 14, 2012 2:01 pm

run it how it is until you find out exactly what it is.

cant wait to see this on the saturday riverloop.

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner Campagnolo build

Postby Dan » Fri Sep 14, 2012 3:02 pm

Well if I get the group on tonight - maybe tomorrow morning? 8 day bike24 delivery - customs must be slow.

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner Campagnolo build

Postby Dan » Fri Sep 14, 2012 6:13 pm

So, look what arrived this afternoon...

Image

Short of a seatpost bolt and some tyres, this could be on the road tomorrow morning.

Yes, that's a poppy tablecloth - what about it?

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner Campagnolo build

Postby Dan » Mon Sep 17, 2012 10:19 am

Some more photos from over the weekend....

Cassette on. I initially thought the ramping/alignment looked off, but then realised the cassette can only mount to the freehub in one specific rotational alignment.

Image


Rear Derailleur on. Glory work.

Image


BB Cups in. Chased the threads lightly with an old BB shell - went in smoothly. Yes, that's an apprentice in the background :D

Image


Crankset in. Some improv required - see below.

Image


I need to improvise a 14mm hex bit for setting the crank bolt - an M10 Hi tensile bolt is slightly over that, so some filing down of each face will give a nice crank setter.
As the cranks are hollow, this will also provide (with appropriately sized washers) a pad against which the gear/crank puller can press for removal of the crank.

Having patience and resisting the urge to rush it all together is difficult, but sensible. Previously I'd have had gear and brake cables hanging all over the place already, and no good can come of that.

Wazza
Posts: 785
Joined: Tue Feb 14, 2006 10:22 pm
Location: Clontarf, Qld

Re: Viner Campagnolo build

Postby Wazza » Mon Sep 17, 2012 9:12 pm

Do we get a squiz this Raturday?
Waz
Wazza
Image

User avatar
munga
Posts: 7023
Joined: Mon Jan 28, 2008 3:17 pm
Location: wowe
Contact:

Re: Viner Campagnolo build

Postby munga » Mon Sep 17, 2012 10:26 pm

looking awesome! don't know why, but i expected to see a silver groupset. black group with black wheels on a nice old frame really works!

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner Campagnolo build

Postby Dan » Tue Sep 18, 2012 2:55 am

Wazza wrote:Do we get a squiz this Raturday?
Waz
Hope so ;)

Munga re: the group, I considered the silver for a second but then went for stealth instead - the black cranks I got for the single speed confirmed this for me.

It's less bumblebee than I first thought, thankfully - no stealing wazza's Geoff Scott thunder o_O

User avatar
vaeske
Posts: 1013
Joined: Thu May 05, 2011 9:22 am
Location: Brisbane
Contact:

Re: Viner Campagnolo build

Postby vaeske » Tue Sep 18, 2012 6:37 am

too late... wazza's project will take longer to do but you have the potential to get this bad boy on the road this raturday. git going.

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner Campagnolo build

Postby Dan » Tue Sep 18, 2012 6:50 am

vaeske wrote:git going.
righto.

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner Campagnolo build

Postby Dan » Wed Sep 19, 2012 6:37 am

Some more...


Setting the hood/bar levels

Image


Sorting cable routing

Image


Almost there - resisted the urge to denude the Superlite of it's Contis, as some Rubino Pros should arrive today or tomorrow.

Image

In any case, the Viner will be out and about for Rad Retro Raturday Riverloop.

User avatar
vaeske
Posts: 1013
Joined: Thu May 05, 2011 9:22 am
Location: Brisbane
Contact:

Re: Viner Campagnolo build

Postby vaeske » Wed Sep 19, 2012 12:10 pm

noice!!!!!

Who is online

Users browsing this forum: MechHorse