Ultegra 6700 shifter on 6600 groupset

For Roadies

Ultegra 6700 shifter on 6600 groupset

Postby scratcher33 » Thu Oct 04, 2012 5:03 pm

Has anyone had experience using ultegra 6700 shifters on the 6600 groupset - any issues or concerns ???
scratcher33
 
Posts: 11
Joined: Thu Sep 27, 2012 1:27 pm

by BNA » Thu Oct 04, 2012 6:40 pm

BNA
 

Re: Ultegra 6700 shifter on 6600 groupset

Postby warthog1 » Thu Oct 04, 2012 6:40 pm

I have recently done that with my old trainer/commuter. No issues with the shifting at all front or rear. The braking needs a touch more lever pressure as the 6700 levers have a different pull ratio to the 6600 ones, still pulls up fine though.
It's a very worth while upgrade to get rid of those bloody cables flapping around at the front. The 6700 shifters are more comfortable IMO as the are a larger diameter body and and feel firmer to hang onto.
User avatar
warthog1
 
Posts: 3100
Joined: Wed Jul 25, 2012 4:40 pm

Re: Ultegra 6700 shifter on 6600 groupset

Postby scirocco » Thu Oct 04, 2012 8:29 pm

+1 to all warthog1's comments. It really is worthwhile to upgrade the brake calipers from 6600 to 6700. The difference is amazing, not that there's too much wrong with the 6700 shifters / 6600 brakes combo.

If you have small hands you may find the larger diameter hoods a little strange to get used to, but you do adapt.

The cable routing under the bar tape is nice, but don't clamp the cable down too tight with the tape as it can make the shifting a little bit sluggish compared to 6600. Be prepared for a much more solid mechanical feel with 6700 compared to light action Swiss watch feel with 6600 shifting.
scirocco
 
Posts: 320
Joined: Thu Sep 29, 2011 7:34 pm


Return to Road Biking

Who is online

Users browsing this forum: No registered users



Popular Bike Shops
Wiggle Wiggle UK
Ground Effect Ground Effect NZ
Ebay Ebay AU
Chain Reaction Cycles CRC UK

“Bicycles BNA Twitter
“Bicycles BNA Facebook
“Google+ BNA Google+
“Bicycles BNA Newsletter

> FREE BNA Stickers