new road wheel/cassette question

Workshop tales, trials and disasters.
Maintenance tips, techniques and myths.
Technical discussion, description and outright lies

new road wheel/cassette question

Postby jjcp » Sat Oct 20, 2012 6:16 am

Hi All,

A newbie question.

So after purchasing my first new set of road wheels. I decided to mix the gearing and bought a new cassette aswell. Now here is the question/problem: 1) why is the middle part of the cassette loose? i have tightened it according to the shimano intructions.Do i need spacers? 2) it wont shift to the biggest cog. Do i need to adjust the rear derailleur? 3) there are some noise when shifting up/down. I am pretty sure its the chain rubbing against the cassette.

Here are the specs:

Groupset: Full Ultegra 6700, cassette: 12-25

New cassette: 11-23

thanks all
jjcp
 
Posts: 39
Joined: Wed Dec 21, 2011 5:10 pm

by BNA » Sat Oct 20, 2012 8:41 am

BNA
 

Re: new road wheel/cassette question

Postby Bentnose » Sat Oct 20, 2012 8:41 am

Are you sure you aren't missing some spacers in the middle, I just put a new Ultegra cassette on my bike and it was nearly all loose sprokets with loose spacers in between, can you see a spacer between every cog?
Image
User avatar
Bentnose
 
Posts: 644
Joined: Sun Jan 03, 2010 8:00 am
Location: Watsonia North, Victoria

Re: new road wheel/cassette question

Postby open roader » Sun Oct 21, 2012 2:10 pm

+ 1 spacer placement most likely.

Check, check, double check......?

A 25 tooth cog is not going to create a chain / cage length issue and the rear derailleur should maintain it's alignment if you are switch between like for like cassettes. My guess without seeing the set up is that the biggest cog (25t) is set too far into the hub for the rear derailleur to engage meaning a cog spacing issue..........
3rd class cycling is always better than 1st class walking
User avatar
open roader
 
Posts: 2269
Joined: Tue Jul 28, 2009 7:05 pm
Location: Dueling Banjo Country

Re: new road wheel/cassette question

Postby jjcp » Mon Oct 22, 2012 11:12 am

it looks like I need a mavic spacer instead of the shimano ones.
jjcp
 
Posts: 39
Joined: Wed Dec 21, 2011 5:10 pm

Re: new road wheel/cassette question

Postby biker jk » Mon Oct 22, 2012 7:06 pm

When I changed a cassette on a friend's Mavic rear wheel (some time ago now) I had to use both the Mavic spacer and the Shimano spacer.
User avatar
biker jk
 
Posts: 2174
Joined: Tue Nov 17, 2009 5:18 pm
Location: Sydney


Return to The Shed

Who is online

Users browsing this forum: Google [Bot]



Support BNA
Click for online shops
Torpedo 7 Torpedo7 AU
Ground Effect Ground Effect NZ
Chain Reaction Cycles CRC UK
Wiggle Wiggle UK
Cycling Express Cycling Express
Ebay Ebay AU
ProBikeKit ProBikeKit UK
Evans Cycles Evans Cycles UK
JensonUSA Jenson USA
JensonUSA Competitive Cyclist