Workshop tales, trials and disasters.
Maintenance tips, techniques and myths.
Technical discussion, description and outright lies
7 posts • Page 1 of 1
I've recently had a frame powder coating and went to being rebuilding the head unit. and it appears with the power coating one or two parts no longer fit in the head tube. I was thinking about doing some filing, but i don't want to damage the paint work (after already clumisly putting a small ding it with my own handy work).
Is there another potential way to do this?
I though about maybe putting the parts in the freezer for a while to see if they would squeeze in after that
Yes this is frustrating !
But surely if they are the same parts you took out, then it is due to some excess paint that can be scraped off from the inside of the headtube
If it is more than that and there is no urgency, as Twizzle has suggested, go to a framebuilder.
But if you are prepared to take a slight risk, get a metal file, preferably one with a slightly curved face.
But be careful. metal file
Recent Favorite rides:
December -TUMBULGUM to TOMEWIN by some obscure route-can't wait to do it again !!!
Shops with an expert mechanic should have them as well.
Our Website is: http://www.pro-liteoz.com Find us on Facebook by searching for "Pro-Lite Australia"
Yep, if you're worried about filing it yourself then your LBS would be the best place to go. If they're not too busy they'll have the headset in, fitted and set correctly inside half an hour.
Riding bikes in traffic - what seems dangerous is usually safe; what seems safe is often more dangerous.
this is going back away.. moved house so the bike was packed up..
the other day i pulled it back out, fixed the above issue, however now i realise that in the painting the chrome (?) spacer at the top of the forks that separate them from the head tube has been lost.
any idea of how to replace?
Let's make sure we're talking the same bit here...
Thank you Sheldon.
...whatever the road rules, self-preservation is the absolute priority for a cyclist when mixing it with motorised traffic.
London Boy 29/12/2011
7 posts • Page 1 of 1
Who is online
Users browsing this forum: No registered users