All else being equal, what would typically be the fastest wheel size combo?
I'm in the middle of buying a Toscana 20/26 OSS, it's like Europa's but with a 20" front wheel. The interesting thing about it is that the 20/26 and the 26/26 share the same frame, it's the fork and front wheel that changes.
That led me to thinking about different wheel combos. From what I've read in the forums it seems that larger wheels will tend to be faster, so I'm wondering if there will be a benefit in going to a 26/26 or even a 700c/26" setup?....ignoring any necessary frame modding issues to get the 700c size wheel to work in that frame, but from a speed/performance/handling point of view.
Gab.
Fastest wheel size combo?
- Cyclaholic
- Posts: 156
- Joined: Sun May 25, 2008 2:43 pm
- Location: south west Sydney
-
- Posts: 1391
- Joined: Tue Oct 02, 2007 7:12 pm
- Location: Albany. 400km South of Perth
Postby John Lewis » Sun Jun 01, 2008 5:13 pm
Hi Gab,
All else being equal I think the larger dia. rim should be faster. There are a number of articles on the net though that suggest this is not always the case. Eg a small wheel may accelerate quicker. Do a bit of a search.
I think the real determining factor is your leg length. The seat height on my 20/26 is about 680 mm and is just a bit high for vertically challenged me. It is a bit uncomfortable when starting and stopping.
I looked at Kalgrim's bike a few weeks back. He has dual 700's I think and it would have been way too high for me.
From my perspective I need to go with the 20/26 to get a fit as much as I'd like a highracer.
Best advice would be try before you buy if you possibly can.
John Lewis
All else being equal I think the larger dia. rim should be faster. There are a number of articles on the net though that suggest this is not always the case. Eg a small wheel may accelerate quicker. Do a bit of a search.
I think the real determining factor is your leg length. The seat height on my 20/26 is about 680 mm and is just a bit high for vertically challenged me. It is a bit uncomfortable when starting and stopping.
I looked at Kalgrim's bike a few weeks back. He has dual 700's I think and it would have been way too high for me.
From my perspective I need to go with the 20/26 to get a fit as much as I'd like a highracer.
Best advice would be try before you buy if you possibly can.
John Lewis
- Uba Tracker
- Posts: 265
- Joined: Sun Jan 13, 2008 9:50 pm
- Location: Toowoomba, Qld
Postby Uba Tracker » Mon Jun 02, 2008 1:39 pm
G'day Gab,
That's a really interesting question and regrettably I have no published scientific evidence to say conclusively one way or the other which is the fastest. However, some years ago I was involved in manufacturing a Go Kart or more accurately a 'Billy Cart' with a class from one of our local schools. The goal being to achieve the highest possible speed on a controlled descent. Now we tried all sorts of combinations but eventually found that a larger diameter wheel with thin tyres inflated to their maximum pressure achieved the best result. It was faster by a significant margin too. We ascertained our combination reduced rolling resistance by overcoming such influences as wind resistance, road engaging friction and bearing hub resistance. I am not saying that this is conclusive proof but it's worth noting.
cheers
Harry
That's a really interesting question and regrettably I have no published scientific evidence to say conclusively one way or the other which is the fastest. However, some years ago I was involved in manufacturing a Go Kart or more accurately a 'Billy Cart' with a class from one of our local schools. The goal being to achieve the highest possible speed on a controlled descent. Now we tried all sorts of combinations but eventually found that a larger diameter wheel with thin tyres inflated to their maximum pressure achieved the best result. It was faster by a significant margin too. We ascertained our combination reduced rolling resistance by overcoming such influences as wind resistance, road engaging friction and bearing hub resistance. I am not saying that this is conclusive proof but it's worth noting.
cheers
Harry
A bad day's riding beats a good day's work everytime
- Kalgrm
- Super Mod
- Posts: 9653
- Joined: Fri May 25, 2007 5:21 pm
- Location: Success, WA
- Contact:
Postby Kalgrm » Mon Jun 02, 2008 9:35 pm
For what it's worth, my 700c wheels (23mm tyres) are about 10% faster than my 26" MTB slicks on the the same bike. I believe the reason is the larger diameter allowing smaller rolling resistance and the lower wind resistance of thinner tyres.
Cheers,
Graeme
Cheers,
Graeme
Think outside the double triangle.
---------------------
Music was better when ugly people were allowed to make it ....
---------------------
Music was better when ugly people were allowed to make it ....
- Cyclaholic
- Posts: 156
- Joined: Sun May 25, 2008 2:43 pm
- Location: south west Sydney
Postby Cyclaholic » Tue Jun 03, 2008 12:00 am
Thanks everyone for the replies. Sounds to me like there's plenty of room for experimentation here. I have the parts and the opportunity so I guess I'll just have to try out different combos and see for myself then. Of course I'll post my results here, subjective and un-scientific as they'll be.
- Leigh_caines
- Posts: 358
- Joined: Wed Jan 02, 2008 4:37 pm
- Location: Woolgoolga
Postby Leigh_caines » Tue Jun 03, 2008 6:10 am
Well if one could buy 20†wheels as light and narrow as 700 by 23 and the tyers to match…
But they don’t seem to be out there
But they don’t seem to be out there
- Kalgrm
- Super Mod
- Posts: 9653
- Joined: Fri May 25, 2007 5:21 pm
- Location: Success, WA
- Contact:
Postby Kalgrm » Tue Jun 03, 2008 10:23 am
I have seen 1" wide 20" wheels and tyres - the guy who makes Logo trikes fits them to his sporty models. However, it's not the width or weight making the 700c wheels roll more easily. It's the diameter.Leigh_caines wrote:Well if one could buy 20†wheels as light and narrow as 700 by 23 and the tyers to match…
But they don’t seem to be out there
A good analogy is to roll a marble and a basket ball along a road surface. The basketball sits on top of the chips and rolls smoothly, while the marble drops into the gaps between each chip, slowing it down as it bounces up and down.
The narrow width of 23mm tyres makes them more aerodynamic, which only really becomes significant above 30km/h.
Cheers,
Graeme
Think outside the double triangle.
---------------------
Music was better when ugly people were allowed to make it ....
---------------------
Music was better when ugly people were allowed to make it ....
- Leigh_caines
- Posts: 358
- Joined: Wed Jan 02, 2008 4:37 pm
- Location: Woolgoolga
Postby Leigh_caines » Tue Jun 03, 2008 11:58 am
Having only ridden heavy recumbents with heavy chunky wheels and tyres….
But I’ve a feeling that if one could lighten it all up….
It’s not like small wheels [20â€}don’t go fast…
like down hill I’ve hit well over 70 many a time…
But along the flat or up hill it is harder pushing a 35k bike + my 73k’s then it is my fixy that weighs 10ks with it’s 700 by 23….
One day….
But I’ve a feeling that if one could lighten it all up….
It’s not like small wheels [20â€}don’t go fast…
like down hill I’ve hit well over 70 many a time…
But along the flat or up hill it is harder pushing a 35k bike + my 73k’s then it is my fixy that weighs 10ks with it’s 700 by 23….
One day….
Jump to
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Cycling Brands
- Cannondale
- Garmin
- Giant
- Shimano
- Trek
Who is online
Users browsing this forum: No registered users
- All times are UTC+11:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
Brought to you by Bicycles Network Australia | © 1999 - 2024 | Powered by phpBB ®
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.