Curb build outs
- WestcoastPete
- Posts: 911
- Joined: Thu Mar 19, 2009 5:59 pm
- Location: Peoples Republic of Coburg, Victoria
Curb build outs
Postby WestcoastPete » Tue Nov 13, 2012 12:08 am
The local council are redesigning a local street and are adding some curb build outs; curbs designed to narrow the road at a point to slow traffic. They are proposing having a 400mm gap between the existing curb and the build out for cyclists. These already exist in other areas of town, and I find that I just take the lane through them rather than go through the gap.
My advocacy colleagues have concerns with this idea, because they feel it forces cyclists to pull out into the middle of the lane at the pinch point, and they feel that this is a bad thing. I'm not so sure. I feel that taking the lane through these sections is more predictable and safer than popping through the narrow gap. I think we'll be trying to argue for wider gaps, say, at least 1200mm, but I'm not sure how much conviction I have for it. Why not just take the lane?
What do you think?
Here's a link to the plans.
Sent from my GT-I9100 using Tapatalk 2
- Mulger bill
- Super Mod
- Posts: 29060
- Joined: Sun Sep 24, 2006 2:41 pm
- Location: Sunbury Vic
Re: Curb build outs
Postby Mulger bill » Tue Nov 13, 2012 12:45 am
Such a small gap is totally impracticable. Have a look at the speed hump installations along HERE and the half baked method of preventing smokeboxers bypassing them. I always take the lane along there because the design prevents streetsweepers getting in there and they consequently contain more crap than parliament house during a late sitting.
London Boy 29/12/2011
-
- Posts: 2631
- Joined: Tue Oct 20, 2009 10:36 pm
Re: Curb build outs
Postby eeksll » Tue Nov 13, 2012 1:06 am
The problem *I* have found on roads with the curb build out is I can't claim the lane between build outs for the above reason. This then means I need to look both backwards and forward when approaching the curb build out section, not ideal. And also some cars zoom to the curb cutouts to get there first, both oncoming traffic and traffic behind. The design also forces the cyclist to ride right into the path of oncoming traffic.
Another situation is I have slowed down to one side (not stopped) to let oncoming traffic through, then rear ward traffic will shoot through after the oncoming traffic has gone through leaving me on the side about to turn out to go through (either impatient or thought I had pulled to the side). Add a leafy street to reduce visiblity at these points, its not a great situation. This is the one I have trouble with sometimes, I don't ride there often any more.
If talking about patient/most drivers not particularly a concern especially if the cyclist is also such minded, but if either the car or cyclist is trying to zoom through it can be less safe than a road with no cutouts.
- WestcoastPete
- Posts: 911
- Joined: Thu Mar 19, 2009 5:59 pm
- Location: Peoples Republic of Coburg, Victoria
Re: Curb build outs
Postby WestcoastPete » Tue Nov 13, 2012 11:32 am
Here's a spot that already has curb build outs, but where a new crossing point will be added (pedestrian refuge in the middle of the road, between the curb build outs).
This is a place where the want to build a curb build out on the corner of an intersection. There will be a build out on the corner on the left there, and another one coming out from the curb on the right.
Again, the way I tackle these is by taking the lane through this point. These areas are low traffic areas, although the second one is on a bus route.
I'm undecided how much effort I personally want to put into lobbying for a 1200-1500mm gap in the build outs. Maybe because I'm used to the idea of not having a gap, I feel OK with the status quo. On the other hand, maybe it would be better to just zoom through the build outs without taking the lane. I wouldn't want anything like this at an intersection though.
P.S. - Isn't street view brilliant!
-
- Posts: 275
- Joined: Mon Jul 25, 2011 10:52 am
Re: Curb build outs
Postby AndyTheMan » Tue Nov 13, 2012 12:16 pm
I don’t like kerb build-outs for the reason that cyclists would be forced to either
a) move into the main traffic lane, or
b) pass in the small section left in the gutter
If you are an experienced cyclist then moving into the lane probably won’t be a problem, but for many less experienced cyclists it could be dangerous.
Of course, even for experienced cyclists, there is always the potential for a bogan driver to object to a cyclist merging to the main lane of traffic….
This is exacerbated by having these build outs every few hundred metres as you have stated – as this means that cyclists will move in and out of the main vehicle path over and over – this makes some drivers agro, and does not assist in harmonious relations between cyclists and car drivers. And does nothing for the less experienced/less assertive cyclists.
Further, less experienced cyclists should not be taught the habit of ‘weaving’ in and out of the main lane of traffic, it makes you unpredicatable and more likely to be hit. We are always told to try and hold your line - don't weave in and out of parked cars - yet here they create a situation where thats exactly what you have to do.
Then again, the other option would be to ‘hold the line’ and ride in the middle of the lane so that you are being obvious/riding big – but this would only further aggravate drivers who see you as taking up ‘their’ space.
Similarly, passing the gutter has too many obstacles, as these areas collect debri/rubbish, are never cleaned. Street sweepers don’t get in there, and it is just creating a lot of work for Council if they are expected to keep them clean.
Plus, these are areas where pedestrians congregate to cross the road.
In summary, these bits of infrastructure force cyclists to make the decision of either entering the main lane of vehicle traffic (with all the problems associated) or passing through the small gap between the build out and the gutter (with all the problems associated).
Its lose/lose from a cyclist point of view.
It’s a really odd situation, because traffic calming devices are meant to slow the spend of traffic, to ensure a safer environment for pedestrians and cyclists….. but here we have a situation where the traffic calming devices are actually making things worse for everyone…
The best option would be 1.2 - 1.5m cycle lanes painted up the entire road, and the road design providing a place for these to continue through the build out area - at the moment it would appear that (if there was a cycle lane painted on the road) it would basically vanish before the build-out and re-appear somewhere after....
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Curb build outs
Postby il padrone » Tue Nov 13, 2012 12:23 pm
That is designed to require you to merge with traffic. Claim the lane as early as you can to establish your position.WestcoastPete wrote:Here's an example of what most of the curb build outs are like around the area. I usually just take the lane as I go through them.
That slot on the left is simply a drainage slot, not a place to ride a bike.
"An unjustified and unethical imposition on a healthy activity."
- WestcoastPete
- Posts: 911
- Joined: Thu Mar 19, 2009 5:59 pm
- Location: Peoples Republic of Coburg, Victoria
Re: Curb build outs
Postby WestcoastPete » Tue Nov 13, 2012 12:26 pm
- WestcoastPete
- Posts: 911
- Joined: Thu Mar 19, 2009 5:59 pm
- Location: Peoples Republic of Coburg, Victoria
Re: Curb build outs
Postby WestcoastPete » Tue Nov 13, 2012 12:29 pm
True. But the council are selling them as a gap for cyclists. We aren't convinced. But I'm not convinced that a bigger gap will make this infrastructure more usable. I feel that claiming the lane is the way to go, but I'm experienced and we're supposed to be representing all cyclists, and potential cyclists, so maybe I'm not thinking the way I should be.il padrone wrote:That is designed to require you to merge with traffic. Claim the lane as early as you can to establish your position.WestcoastPete wrote:Here's an example of what most of the curb build outs are like around the area. I usually just take the lane as I go through them.
That slot on the left is simply a drainage slot, not a place to ride a bike.
- find_bruce
- Moderator
- Posts: 10580
- Joined: Mon May 09, 2011 8:42 pm
- Location: Sydney
Re: Curb build outs
Postby find_bruce » Tue Nov 13, 2012 12:46 pm
An additional problem are those bikes that are not a traditional form - in my case I am often towing a trailer with the small boy on board that is wider than 400 mm. Despite travelling at a lower pace, in such circumstances I would have no option but to move out into the main traffic lane.
The same concern would also apply to most trikes.
-
- Posts: 10316
- Joined: Thu Sep 18, 2008 12:10 pm
- Location: Sydney
Re: Curb build outs
Postby Nobody » Tue Nov 13, 2012 1:40 pm
They also fill with destabilising sand as well.find_bruce wrote:I agree with the various comments above that encouraging cyclists to weave into and out of the main traffic lane is not a good idea & that the proposed 400 mm gap fills with debris that is not cleaned by street sweepers.
-
- Posts: 1791
- Joined: Wed Mar 02, 2011 1:25 pm
Re: Curb build outs
Postby wellington_street » Tue Nov 13, 2012 2:02 pm
I agree with several posters above, these are horrible for cyclists when they create the weave. They are good if there's a bypass (that is kept clean - streetsweepers not fitting is NOT an excuse for Councils, they are just lazy and don't care about cyclists) or if the cyclist is claiming the lane the whole way. One of my local routes is built like that and I hate it, especially as it is combined with a solid median island.
-
- Posts: 3056
- Joined: Tue Jan 05, 2010 2:54 pm
Re: Curb build outs
Postby zero » Tue Nov 13, 2012 2:07 pm
its absurd to presume a cycle will always track within 5cm. Hell in order to initiate a turn the front wheel or even just balance the bike, the front wheel will track that far from the nominal center of course, which means they are designing a facility with NO clearance.
- Aushiker
- Posts: 22395
- Joined: Tue Jun 05, 2007 1:55 pm
- Location: Walyalup land
- Contact:
Re: Curb build outs
Postby Aushiker » Tue Nov 13, 2012 3:42 pm
I learnt two things today: (1) What a kerb out is and (2) that we are meant to ride that narrow gap ... It has never occurred to me to ride a narrow gap like that, instead I simply claim the lane. I would have assumed it was there for rain run-off purposes not cyclists. Stupid idea in my view.WestcoastPete wrote:Here's an example of what most of the curb build outs are like around the area. I usually just take the lane as I go through them.
Here's a spot that already has curb build outs, but where a new crossing point will be added (pedestrian refuge in the middle of the road, between the curb build outs).
It might be also helpful to review the Austroad guidelines on cycling infrastructure. May provide some guidance/weight to your position.
Andrew
Andrew
Aushiker.com
-
- Posts: 1791
- Joined: Wed Mar 02, 2011 1:25 pm
Re: Curb build outs
Postby wellington_street » Tue Nov 13, 2012 5:04 pm
Cyclists definitely shouldn't use the gap in that example - you had it right the first time (and Darwin Clowncil have it wrong).Aushiker wrote:I learnt two things today: (1) What a kerb out is and (2) that we are meant to ride that narrow gap ... It has never occurred to me to ride a narrow gap like that, instead I simply claim the lane. I would have assumed it was there for rain run-off purposes not cyclists. Stupid idea in my view.
Very good idea.Aushiker wrote:It might be also helpful to review the Austroad guidelines on cycling infrastructure. May provide some guidance/weight to your position.
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Curb build outs
Postby il padrone » Tue Nov 13, 2012 5:54 pm
A format like this would probably be OKfind_bruce wrote:I agree with the various comments above that encouraging cyclists to weave into and out of the main traffic lane is not a good idea & that the proposed 400 mm gap fills with debris that is not cleaned by street sweepers.
An additional problem are those bikes that are not a traditional form - in my case I am often towing a trailer with the small boy on board that is wider than 400 mm. Despite travelling at a lower pace, in such circumstances I would have no option but to move out into the main traffic lane.
The same concern would also apply to most trikes.
"An unjustified and unethical imposition on a healthy activity."
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Curb build outs
Postby il padrone » Tue Nov 13, 2012 5:58 pm
Sydney street sweeperwellington_street wrote:They are good if there's a bypass (that is kept clean - streetsweepers not fitting is NOT an excuse for Councils, they are just lazy and don't care about cyclists)
"An unjustified and unethical imposition on a healthy activity."
-
- Posts: 375
- Joined: Mon Aug 22, 2011 7:02 pm
Re: Curb build outs
Postby tubby74 » Tue Nov 13, 2012 6:38 pm
I have speed humps like that in my street where the street is only 7 metres wide. there is a gap on the kerb side to get through but that's a very dangerous place to put yourself. cars always try to swerve to get a good line through them, often right after giving in to that urge that they simply have to get in front of the bike at all costs. when I ride through the streets with those humps on them the only option I can take is to completely clock the road, riding right up the centre so no car can get past.Mulger bill wrote:400mm? Tell 'em they're dreamin'
Such a small gap is totally impracticable. Have a look at the speed hump installations along HERE and the half baked method of preventing smokeboxers bypassing them. I always take the lane along there because the design prevents streetsweepers getting in there and they consequently contain more crap than parliament house during a late sitting.
I'm still working with council on a better option. narrowing for one car at a time passing with side access for bikes is about the only thing that is practical on such narrow roads. state department is proving to be the stereotypical public servants - we've got guidelines,never mind if those guidelines are causing the problems.
All up though those speed humps are far more dangerous than any problem they were originally designed to address.
- jules21
- Posts: 10555
- Joined: Thu Apr 02, 2009 11:14 pm
- Location: deep in the pain cave
Re: Curb build outs
Postby jules21 » Thu Nov 15, 2012 11:39 am
- GeoffInBrisbane
- Posts: 704
- Joined: Mon Nov 19, 2012 8:31 pm
Re: Curb build outs
Postby GeoffInBrisbane » Wed Nov 21, 2012 8:34 am
OLD:
NEW
This is on my commute. It's a fairly fast road, two lanes in each direction, and now cyclists not only have to take their lane, but merge (while going through a junction) into the right lane, so there is no open lane for cars to pass.
Am I right to be concerned, or is this okay?
-
- Posts: 9
- Joined: Tue Nov 20, 2012 6:05 pm
Re: Curb build outs
Postby sergiomyth » Wed Nov 21, 2012 9:08 am
- GeoffInBrisbane
- Posts: 704
- Joined: Mon Nov 19, 2012 8:31 pm
Re: Curb build outs
Postby GeoffInBrisbane » Wed Nov 21, 2012 10:03 am
To be fair to the council, I'm fairly sure they did this to make the crossing safer for school children (out of shot top right is Glenala High School) but it is just badly designed. The fact that the left lane ends before the junction means cyclists (me!) end up riding on the shoulder in the approach, which then magically becomes a lane for 80 metres through the junction, then magically becomes a shoulder again, then disappears completely. As for the crossing itself, if the kerb build out stopped about 1.5m earlier, there would be room for cyclists to ride without having to merge into the main lane.
I nearly complained immediately after this was introduced...feeling like perhaps I should have done now.
-
- Posts: 1791
- Joined: Wed Mar 02, 2011 1:25 pm
Re: Curb build outs
Postby wellington_street » Wed Nov 21, 2012 11:39 am
Having a 'bypass' like at other traffic calming devices would not have worked though as it would have conflicts with the children crossing.
- GeoffInBrisbane
- Posts: 704
- Joined: Mon Nov 19, 2012 8:31 pm
Re: Curb build outs
Postby GeoffInBrisbane » Wed Nov 21, 2012 12:18 pm
There should be a cycle lane heading southbound as well, obviously. It's not as scary as the northbound direction as the junction is after the crossing, but it's still not great.
-
- Posts: 1791
- Joined: Wed Mar 02, 2011 1:25 pm
Re: Curb build outs
Postby wellington_street » Wed Nov 21, 2012 12:24 pm
- WestcoastPete
- Posts: 911
- Joined: Thu Mar 19, 2009 5:59 pm
- Location: Peoples Republic of Coburg, Victoria
Re: Curb build outs
Postby WestcoastPete » Wed Nov 21, 2012 12:52 pm
I started this topic because our local council is consulting with us (Bicycle NT) about the changes planned for this street. We're at the stage now where we're meeting with the infrastructure guys at the site on Friday. I wonder if there is an equivalent group that was consulted about this infrastructure change, if not, maybe there should be, and that only happens if people do it.
To be honest, I'm still not convinced that these build outs are that bad, at least in the design proposed in this instance here in Darwin. Yes, they push the cyclists into traffic, but I don't necessarily see this as a bad thing. In regards to the level crossing in the Brisbane example, I can see the rationale for adding the crossing there. Perhaps there could have been a bike lane added on the lateral sides of the build outs, but they'd also need to have zebra crossings. I guess this would be preferable, but I don't see merging at this point as a particular problem. My problem with feeling like this is that perhaps I'm not giving enough consideration to less confident cyclists.
Return to “Cycling Safety and Advocacy”
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+11:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.