Viner and Europa rebuilds - two on the go!

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Viner and Europa rebuilds - two on the go!

Postby Dan » Wed Nov 14, 2012 1:45 pm

So - after buying the Viner from vaeske and loving it, picking up a Europa from El Brado and loving it, buying the tamari as a ready to build frameset and dropping a few on Erle's Kotter (welcome back, welcome back, welcome back), its time to restore the Viner and the Europa. Heresy, I hear you say, however the Viner needs a restoration to keep it in a good condition into the future. I'd call it conservation, as opposed to preservation.

Details as follows:

Viner
8 speed campagnolo group, to shimano cassette using a Wheels Mfg Shift-8 spacer kit. I'm really interested to see how this works.
Grey with yellow decals - standard issue colour from the early 80s. Decals sourced from Greg (cyclomondo).

Europa
7 speed DT shifting Shimano 600 group - to keep Wal happy ;)
Teal with a chrome fork (was lurking under respray #3) - after seeing Chris' thread on his pearl cannondale I considered pearl for a second, but decided against it. Decals also from cyclomondo.

I've effectively sorted out the build details for each build, and am waiting on a number of parts from the UK, Netherlands and Spain. 95% of it is here though, and good to go. Plan is to get the frames stripped, painted, decal-led and clear coated, then left to cure for 6 weeks while I'm away in Germany on holiday (and looking for frames). I'll update you on the details in future posts.

Until then, photos....

Viner - As bought and in present form
Image

Image

Europa as bought
Image


Oh, and a bit of stripping and polishing this morning resulted in this....

Image

dubrat
Posts: 453
Joined: Tue Jun 22, 2010 4:11 pm

Re: Viner and Europa rebuilds - two on the go!

Postby dubrat » Wed Nov 14, 2012 3:11 pm

Buy the Viners track twin..... Off me...

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner and Europa rebuilds - two on the go!

Postby Dan » Wed Nov 14, 2012 4:07 pm

dubrat wrote:Buy the Viners track twin..... Off me...
that would be a dangerous move for all involved :)

User avatar
munga
Posts: 7023
Joined: Mon Jan 28, 2008 3:17 pm
Location: wowe
Contact:

Re: Viner and Europa rebuilds - two on the go!

Postby munga » Wed Nov 14, 2012 6:28 pm

show me this teal colour

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner and Europa rebuilds - two on the go!

Postby Dan » Wed Nov 14, 2012 9:28 pm

Like this...Image

tripstobaltimore
Posts: 916
Joined: Fri May 29, 2009 10:59 am

Re: Viner and Europa rebuilds - two on the go!

Postby tripstobaltimore » Wed Nov 14, 2012 9:47 pm

So ummm.... If you find any good frames in Germany (58-60cm tt and st) feel free to let me know :wink:

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner and Europa rebuilds - two on the go!

Postby Dan » Mon Nov 19, 2012 4:05 pm

A few arrivals today....

Back from the blasters
Image

Post
Image

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner and Europa rebuilds - two on the go!

Postby Dan » Tue Nov 20, 2012 4:12 pm

A make-do spray booth in the carport for the primer.

Image

Image

Might do some colour tomorrow.

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner and Europa rebuilds - two on the go!

Postby Dan » Wed Nov 21, 2012 4:44 am

And something to pass the time... Turbo coming back to life.

Image

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner and Europa rebuilds - two on the go!

Postby Dan » Wed Nov 21, 2012 2:14 pm

Will most likely be daily updates for the next few days...

Went for a spin with elantra this morning, hit a few hills, became moderately short of breath, etc. Then came home and set about sorting the parts for these two.

The Europa is getting a tricolour group - 6400 series with dual pivot brakes, 7 speed indexed downtube shifting. Actually, the cranks are 6200 series but I can switch that out easily enough in time. These parts are all here and waiting, so in effect its ready to go once we return from holidays.

The Viner is still getting an 8 speed campag group, with ergos, however I'm going to try a HG cassette with spacer kit to match the campag index. I have the front derailleur, and I think I have the crankset too, however I'm waiting on the shifters to arrive, and am in the process of sourcing dual pivots and a rear derailleur as we speak.

BUT: Today's progress:

Gave the frames a 2000 grit wet rub this morning, then sponged down and let them dry. First coat of colour on - a light guide coat, then full coverage 5 mins afterwards.

For the Europa, I'm aiming for a light teal, so the first layer is a silver - if any of it reads through the final coat it'll come across as a metallic fleck, which isn't so bad.

Image


The Viner got the same silver as a guide coat, but with a grey full colour coat following that. I don't think the silver will show after the second coat of grey, but after seeing this, I'd be happy to throw down another light silver coat before the final grey goes on...

Image

Image


And finally, a rather boring photo of the Viner fork - the Europa has a chrome fork, which is sitting on the back deck ready to go.

Image

User avatar
GaryF
Posts: 1201
Joined: Wed Dec 27, 2006 1:38 am
Location: Near Bundaberg, Queensland.

Re: Viner and Europa rebuilds - two on the go!

Postby GaryF » Wed Nov 21, 2012 3:25 pm

Great progress. My favourite photo shows your great spray booth. I've always used old cotton sheets which are just about useless. Your use of plastic tarps is a much better idea that I will have to pinch.Thanks.

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner and Europa rebuilds - two on the go!

Postby Dan » Wed Nov 21, 2012 4:06 pm

Thanks Gary. It's not an ideal setup, as all my tarps don't go to the floor, but the small gap at the bottom gives a) access and b) vacuum properties. As long as its still(ish) it works really well. And hey, I'm painting with rattle cans ;)

I'm excited about the Viner the most - it rides so well and its a shame to have it off the road for even a week....

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner and Europa rebuilds - two on the go!

Postby Dan » Thu Nov 22, 2012 6:04 pm

Threw some colour on today.

Viner Grey

Image


Europa Teal

Image


The shift-8 kit arrived as well, so I've put it on a Mavic and onto the Tamari for a shake down tomorrow - will report back.

EDITED to remove instagram madness. Never mind the Landscape Architect's yard - plumber/leaky taps kind of thing.
Last edited by Dan on Thu Nov 22, 2012 7:38 pm, edited 1 time in total.

BRLVR.v2
Posts: 725
Joined: Sat Jul 09, 2011 8:33 pm

Re: Viner and Europa rebuilds - two on the go!

Postby BRLVR.v2 » Thu Nov 22, 2012 7:07 pm

What's that indentation on the down tube all about? Looks kinda weird in the way it presents.

User avatar
sunho
Posts: 433
Joined: Mon Feb 13, 2012 11:22 am

Re: Viner and Europa rebuilds - two on the go!

Postby sunho » Thu Nov 22, 2012 7:21 pm

Very classy Dan!

The camera effects throw me off a bit! :grin:

Sent from my Galaxy Nexus

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner and Europa rebuilds - two on the go!

Postby Dan » Thu Nov 22, 2012 7:26 pm

BRLVR.v2 wrote:What's that indentation on the down tube all about? Looks kinda weird in the way it presents.
I thought that too, but then saw its regular - its just the recess for the inner chain ring along the chainstay (unless there's a ding in the downtube I've missed?) - sorry, photographing with the light, not per driveside rule.
sunho wrote:The camera effects throw me off a bit!
Yeah, had instagram open.....

BRLVR.v2
Posts: 725
Joined: Sat Jul 09, 2011 8:33 pm

Re: Viner and Europa rebuilds - two on the go!

Postby BRLVR.v2 » Thu Nov 22, 2012 8:13 pm

Dan wrote:
BRLVR.v2 wrote:What's that indentation on the down tube all about? Looks kinda weird in the way it presents.
I thought that too, but then saw its regular - its just the recess for the inner chain ring along the chainstay (unless there's a ding in the downtube I've missed?) - sorry, photographing with the light, not per driveside rule.
ignore my Q... I'm such a retard... Just noticed it's the drive side chain stay and not the down tube like I previously thought. I really need to pay more attention.
As cool as these build are gonna be, i've gotta say that the tamari you have is by far the pick of the bunch IMHO.

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner and Europa rebuilds - two on the go!

Postby Dan » Thu Nov 22, 2012 8:34 pm

Thanks Dave. There's a time and a place for each of these bikes, but yes, the tamari does ride wonderfully.... which is why its going for a run tomorrow morning :)

User avatar
grantw
Posts: 1792
Joined: Mon Nov 09, 2009 11:22 am
Location: Wollongong

Re: Viner and Europa rebuilds - two on the go!

Postby grantw » Thu Nov 22, 2012 8:47 pm

Loving the thread Dan and the paint is looking good.
Image

User avatar
singlespeedscott
Posts: 5510
Joined: Sun Jan 20, 2008 4:35 pm
Location: Elimbah, Queensland

Re: Viner and Europa rebuilds - two on the go!

Postby singlespeedscott » Thu Nov 22, 2012 9:22 pm

Nice work Dan.
Image

User avatar
munga
Posts: 7023
Joined: Mon Jan 28, 2008 3:17 pm
Location: wowe
Contact:

Re: Viner and Europa rebuilds - two on the go!

Postby munga » Thu Nov 22, 2012 10:06 pm

alright for a gardener.

as for the garden.. 8)

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner and Europa rebuilds - two on the go!

Postby Dan » Sat Nov 24, 2012 5:25 pm

Did some lug detailing today. Well, yesterday too. Gloss enamel - $3.50 from hobbyrama.

Image

Image

Image

I then set the frames into a hot car (thanks spirito) to cure a bit more rapidly. Opened door after 3 hours - smelt fumes - paint not yet fully cured. Will wait until Tuesday or Wednesday and check again, before applying the decals - imagine its best they go onto cured paint. From there, clear coat, and hang in the spare room.

Crowz
Posts: 219
Joined: Sat Sep 15, 2012 12:37 am

Re: Viner and Europa rebuilds - two on the go!

Postby Crowz » Sat Nov 24, 2012 6:51 pm

Lug detailing looks good mate. Can't wait to see them finished!

Wazza
Posts: 785
Joined: Tue Feb 14, 2006 10:22 pm
Location: Clontarf, Qld

Re: Viner and Europa rebuilds - two on the go!

Postby Wazza » Sat Nov 24, 2012 7:31 pm

Just doing a peruse and catchup, now I know what you were talking about Friday and this morning, :oops:
Looking fabulous my friend. :wink:
Waz
Wazza
Image

User avatar
Dan
Posts: 3289
Joined: Fri Oct 16, 2009 1:32 pm
Location: Vegas, baby

Re: Viner and Europa rebuilds - two on the go!

Postby Dan » Sun Nov 25, 2012 8:44 am

Wazza wrote:Looking fabulous my friend. :wink:
Methink your signature needs a refresh :)

Who is online

Users browsing this forum: No registered users