Cervelo R3 - Cadence Sensor Fit

Cervelo R3 - Cadence Sensor Fit

Postby apples » Wed Nov 21, 2012 11:04 am

I’m looking for ideas for fitting a speed / cadence sensor to my R3.

I’m using the Garmin system and have a GSC10 speed and cadence sensor that I want to fit. The GSC10 has a curved bottom and the R3 stay is a chunky square shape. I can fit the GSC without any issues but it’s not a really clean look so I thought I’d see if the BNA Cervelo brains trust had any better suggestions :)
apples
 
Posts: 2
Joined: Thu Oct 04, 2012 12:44 pm

by BNA » Wed Nov 21, 2012 5:41 pm

BNA
 

Re: Cervelo R3 - Cadence Sensor Fit

Postby Dr_Mutley » Wed Nov 21, 2012 5:41 pm

I have a sensor on my RS which shares the same chainstay... There's no real way of making the ugly sensor look good, hence I don't run one on my S5 (cadence from my quarq, speed from Gps)... I'll post a pic tonight when I get home... Use the rubber base and have arm down...
Image
Dr_Mutley
 
Posts: 2055
Joined: Fri Jan 11, 2008 1:28 pm
Location: Flagstaff Hill, Adelaide SA 5159

Re: Cervelo R3 - Cadence Sensor Fit

Postby Dr_Mutley » Wed Nov 21, 2012 8:50 pm

Dirty bike after wet ride... Sorry

Image

Image
Image
Dr_Mutley
 
Posts: 2055
Joined: Fri Jan 11, 2008 1:28 pm
Location: Flagstaff Hill, Adelaide SA 5159

Re: Cervelo R3 - Cadence Sensor Fit

Postby apples » Thu Nov 22, 2012 12:30 pm

Dirty bike is good - at least it's being used :)
I see you've used some insulating tap under the zip-ties which is a great idea.

I think my R3 stay might even be a little chunkier based on how well your sensor seems to fit. I'll post some pics over the w/end once I've fitted.
apples
 
Posts: 2
Joined: Thu Oct 04, 2012 12:44 pm


Return to Cervélo

Who is online

Users browsing this forum: No registered users



Support BNA
Click for online shops
Torpedo 7 Torpedo7 AU
Ground Effect Ground Effect NZ
Chain Reaction Cycles CRC UK
Wiggle Wiggle UK
Cycling Express Cycling Express
Ebay Ebay AU
ProBikeKit ProBikeKit UK
Evans Cycles Evans Cycles UK
JensonUSA Jenson USA
JensonUSA Competitive Cyclist