Handle Bars won't budge from quill stem.

Workshop tales, trials and disasters.
Maintenance tips, techniques and myths.
Technical discussion, description and outright lies

Handle Bars won't budge from quill stem.

Postby mattwilkinson » Wed Dec 26, 2012 7:14 pm

So i'm trying to get the handlebars out of a quill stem. They aren't actually stuck, but beside where the stem sits. There are corrugates holes.
Somehow I cannot get the stem over the holes.

Can someone help me out?

Matt

Image
Image
User avatar
mattwilkinson
 
Posts: 293
Joined: Sun Jun 10, 2012 3:32 pm
Location: Bendigo, Victoria

by BNA » Wed Dec 26, 2012 7:20 pm

BNA
 

Re: Handle Bars won't budge from quill stem.

Postby Bobbybobson » Wed Dec 26, 2012 7:20 pm

Pry open the stem a little with a screw driver or similar device. Be careful about scratching if you're worried about that.
Bobbybobson
 
Posts: 68
Joined: Tue Oct 30, 2012 6:37 am
Location: ACT

Re: Handle Bars won't budge from quill stem.

Postby Lots of steel bikes » Wed Dec 26, 2012 7:24 pm

mattwilkinson wrote:So i'm trying to get the handlebars out of a quill stem. They aren't actually stuck, but beside where the stem sits. There are corrugates holes.
Somehow I cannot get the stem over the holes.

Can someone help me out?

Matt

Image


I've had success in the past by putting a large flat bladed screwdriver or open ended spanner in the stem jaws and levering open a small amount.
Lots of steel bikes
 
Posts: 311
Joined: Fri Dec 23, 2011 8:33 pm

Re: Handle Bars won't budge from quill stem.

Postby baabaa » Wed Dec 26, 2012 7:54 pm

You know you want the right tool for the job
http://www.benscycle.net/index.php?main ... cts_id=900
User avatar
baabaa
 
Posts: 283
Joined: Sun Apr 19, 2009 8:47 am

Re: Handle Bars won't budge from quill stem.

Postby coyote » Wed Dec 26, 2012 9:21 pm

baabaa wrote:You know you want the right tool for the job
http://www.benscycle.net/index.php?main ... cts_id=900


Thanks for the link, two hours later I made it back to fourms. 8) Lots of things I have not seen before. :D
User avatar
coyote
 
Posts: 110
Joined: Sun Apr 22, 2012 2:33 pm
Location: Cairns - Queensland

Re: Handle Bars won't budge from quill stem.

Postby Bobbybobson » Wed Dec 26, 2012 9:28 pm

Yeh, they run a pretty sweet shop with heaps of hard to find pieces
Bobbybobson
 
Posts: 68
Joined: Tue Oct 30, 2012 6:37 am
Location: ACT


Return to The Shed

Who is online

Users browsing this forum: No registered users



Support BNA
Click for online shops
Torpedo 7 Torpedo7 AU
Ground Effect Ground Effect NZ
Chain Reaction Cycles CRC UK
Wiggle Wiggle UK
Cycling Express Cycling Express
Ebay Ebay AU
ProBikeKit ProBikeKit UK
Evans Cycles Evans Cycles UK
JensonUSA Jenson USA
JensonUSA Competitive Cyclist