Spoke tension

Workshop tales, trials and disasters.
Maintenance tips, techniques and myths.
Technical discussion, description and outright lies

Spoke tension

Postby Sparx » Thu Jan 03, 2013 11:12 am

Hi,

I recently bough a new bike, its a flat bar commuter. This morning when I was fitting a cycle computer I noticed that the spokes seemed a bit loose. By this I mean they were not giving a nice 'ping' noise when plucked and if I squeezed two laced spokes there was a fair bit of play and they were rubbing against each other.

Is this normal? I am fairly new to cycling. Should I expect to have to go back to the shop to have the spokes re-tensioned so soon after buying it (approx. 200km of riding).

Incidentally this will be the second time I've had to take the bike back after they failed to tighten the BB properly.
Sparx
 
Posts: 118
Joined: Wed Dec 12, 2012 2:57 pm

by BNA » Thu Jan 03, 2013 12:02 pm

BNA
 

Re: Spoke tension

Postby FuzzyDropbear » Thu Jan 03, 2013 12:02 pm

Hey mate,
You mention that the bottom bracket was loose, did they give the bike it's first service (usually provided free of charge after everything 'wears in')? In which case, I would've thought they should check spoke tension, I would ask them about it. But no, spokes shouldn't become loose after 200km of riding. A mate had that issue and it turned out that the bike shop forgot to go over the rim and tension the spokes correctly before sending the bike out the door.

From your description it does sound like they aren't correctly tensioned. I recently had to tighten my front wheel because the spokes were as you described. If you can find another bike (friend or colleague) to compare against, that might help you gauge if they're incorrectly tensioned.

Cheers, good luck and welcome to cycling!
User avatar
FuzzyDropbear
 
Posts: 296
Joined: Wed Aug 15, 2012 7:55 pm
Location: Ballarat, VIC

Re: Spoke tension

Postby Sparx » Thu Jan 03, 2013 12:30 pm

No bike has not had first service. I had another look and the wheel is ever so slightly out of true - maybe a couple of mm.

BB was loose on first ride and caused crank arm to rub against chain stay.

So it sounds like they've sent the bike out the door with 2 things wrong!
Sparx
 
Posts: 118
Joined: Wed Dec 12, 2012 2:57 pm


Return to The Shed

Who is online

Users browsing this forum: No registered users



Popular Bike Shops
Torpedo 7 Torpedo7 AU
Ground Effect Ground Effect NZ
Chain Reaction Cycles CRC UK
Wiggle Wiggle UK
Ebay Ebay AU



InTouch with BNA
“Bicycles BNA Twitter
“Bicycles BNA Facebook
“Google+ BNA Google+
“Bicycles BNA Newsletter