Ghetto methods of chain removal/destroying

TomBikes
Posts: 103
Joined: Tue Dec 04, 2012 9:40 pm

Ghetto methods of chain removal/destroying

Postby TomBikes » Wed Jan 02, 2013 10:45 pm

I just picked up an old malvern star frame from the local tip. After check of the joints and such I decided to turn it into a ss/fixie get around town, don't really care about bike. I just have a slight problem at the moment. I don't have a chain tool and I'm also unable to find the master chain link. Anyone have any ghetto chain removal solutions?

User avatar
bychosis
Posts: 4343
Joined: Sat Jan 14, 2012 1:10 pm
Location: Lake Macquarie

Re: Ghetto methods of chain removal/destroying

Postby bychosis » Wed Jan 02, 2013 11:21 pm

hacksaw or grinder?
hammer sometihing like a spike down between the plates to get them to pop?
bychosis (bahy-koh-sis): A mental disorder of delusions indicating impaired contact with a reality of no bicycles.

high_tea
Posts: 1486
Joined: Thu Apr 29, 2010 8:10 pm
Contact:

Re: Ghetto methods of chain removal/destroying

Postby high_tea » Wed Jan 02, 2013 11:22 pm

I've used boltcutters on an old, rusted-solid chain. The chain wasn't good for anything afterwards, but then again it wasn't good for anything before that either.

User avatar
drubie
Posts: 4687
Joined: Wed Oct 22, 2008 11:12 am
Location: New England
Contact:

Re: Ghetto methods of chain removal/destroying

Postby drubie » Thu Jan 03, 2013 1:07 am

I've broken proper chain tools on solidly rusted chains before. Now I hit them with an angle grinder instead.
So we get the leaders we deserve and we elect, we get the companies and the products that we ask for, right? And we have to ask for different things. – Paul Gilding
but really, that's rubbish. We get none of it because the choices are illusory.

DavidI
Posts: 175
Joined: Fri Mar 09, 2012 9:24 am

Re: Ghetto methods of chain removal/destroying

Postby DavidI » Thu Jan 03, 2013 8:48 am

Dremel and cutting disc = hot knife through butter :)

slidetaker
Posts: 265
Joined: Mon Feb 21, 2011 8:07 pm

Re: Ghetto methods of chain removal/destroying

Postby slidetaker » Thu Jan 03, 2013 1:15 pm

Chain breaker tool.....you probably need one for the new chain anyway.

If you insist, put it under a hammer and a hard rock, focus on the rustest link, go crazy, it will break.

User avatar
HappyHumber
Posts: 4942
Joined: Wed Nov 14, 2007 11:48 pm
Location: Perth, (S.o.R.) W.A.

Re: Ghetto methods of chain removal/destroying

Postby HappyHumber » Thu Jan 03, 2013 2:53 pm

slidetaker wrote:Chain breaker tool.....you probably need one for the new chain anyway.



^^ Like drubie said. If I am not worried about reusing the chain. I will just mash it with a grinder, bolt cutters or a centre punch on one of the rivets. Or any combination of these. I have ruined what I thought were decent chain tools on long dead & rigor-mortified chains before..... but that's not to say you don't need one for cutting a new replacement chain.
- Kym
Since I keep misplacing my common sense down the shed, I guess I'll have to borrow someone elses off the internet.

LG
Posts: 1506
Joined: Sat Nov 08, 2008 10:46 am
Location: Southeast Tasmania

Re: Ghetto methods of chain removal/destroying

Postby LG » Thu Jan 03, 2013 3:06 pm

A 'ghetto' method would probably be hacksaw through chainstay. Simple!
LG = Low Gear

User avatar
uncle arthur
Posts: 1387
Joined: Tue Oct 02, 2007 9:45 pm
Location: Brisvegas
Contact:

Re: Ghetto methods of chain removal/destroying

Postby uncle arthur » Thu Jan 03, 2013 4:15 pm

LG wrote:A 'ghetto' method would probably be hacksaw through chainstay. Simple!


Don't joke - I've seen that for real in a redneck fixes bike vid on you tube - and it wasn't a cheap frame the redneck destroyed....... and then "repaired" :roll:
What is it with cycling? 30+ kmh and lycra???!!!

User avatar
Mulger bill
Super Mod
Super Mod
Posts: 28375
Joined: Sun Sep 24, 2006 2:41 pm
Location: Sunbury Vic

Re: Ghetto methods of chain removal/destroying

Postby Mulger bill » Thu Jan 03, 2013 4:41 pm

Got any sturdy pointed pliers? One good squeeze in the middle of a pair of outer plates should spring them.
...whatever the road rules, self-preservation is the absolute priority for a cyclist when mixing it with motorised traffic.
London Boy 29/12/2011

TomBikes
Posts: 103
Joined: Tue Dec 04, 2012 9:40 pm

Re: Ghetto methods of chain removal/destroying

Postby TomBikes » Thu Jan 03, 2013 7:43 pm

Thanks for the replies. I'll try some tomorrow and tell you what works.

User avatar
toolonglegs
Posts: 15451
Joined: Fri Jun 29, 2007 7:49 pm
Location: Somewhere with padded walls and really big hills!

Re: Ghetto methods of chain removal/destroying

Postby toolonglegs » Fri Jan 04, 2013 9:04 am

Two shifters / adjustable spanners clamped down on the side plates... Twist back and forth a couple of times.

jasonc
Posts: 8761
Joined: Thu Feb 24, 2011 3:40 pm
Location: Brisbane

Re: Ghetto methods of chain removal/destroying

Postby jasonc » Fri Jan 04, 2013 10:28 am

uncle arthur wrote:
LG wrote:A 'ghetto' method would probably be hacksaw through chainstay. Simple!


Don't joke - I've seen that for real in a redneck fixes bike vid on you tube - and it wasn't a cheap frame the redneck destroyed....... and then "repaired" :roll:


please tell me the "repair was done with gaffa tape
Image

User avatar
uncle arthur
Posts: 1387
Joined: Tue Oct 02, 2007 9:45 pm
Location: Brisvegas
Contact:

Re: Ghetto methods of chain removal/destroying

Postby uncle arthur » Fri Jan 04, 2013 10:57 am

jasonc wrote:
uncle arthur wrote:
LG wrote:A 'ghetto' method would probably be hacksaw through chainstay. Simple!


Don't joke - I've seen that for real in a redneck fixes bike vid on you tube - and it wasn't a cheap frame the redneck destroyed....... and then "repaired" :roll:


please tell me the "repair was done with gaffa tape


The "repair was done by said redneck whittling down a piece of timber to act as a dowel, inserted into the cut ends of the former chainstay, which was then sealed (from memory) wrapped with duct tape.
What is it with cycling? 30+ kmh and lycra???!!!

high_tea
Posts: 1486
Joined: Thu Apr 29, 2010 8:10 pm
Contact:

Re: Ghetto methods of chain removal/destroying

Postby high_tea » Sat Jan 05, 2013 4:15 pm

uncle arthur wrote:
jasonc wrote:
uncle arthur wrote:
Don't joke - I've seen that for real in a redneck fixes bike vid on you tube - and it wasn't a cheap frame the redneck destroyed....... and then "repaired" :roll:


please tell me the "repair was done with gaffa tape


The "repair was done by said redneck whittling down a piece of timber to act as a dowel, inserted into the cut ends of the former chainstay, which was then sealed (from memory) wrapped with duct tape.


I can just imagine the redneck dentistry video they made after that repair failed. Moonshine, a cold chisel and some more whittlin' :shock: :shock: :shock:

TomBikes
Posts: 103
Joined: Tue Dec 04, 2012 9:40 pm

Re: Ghetto methods of chain removal/destroying

Postby TomBikes » Sat Jan 05, 2013 7:32 pm

Used a few methods mixed together. First I twisted an inner chain link up, then I wiggled it a little with some pliers, then I finally popped the plate off with a screwdriver and a hammer.

Thanks!

Who is online

Users browsing this forum: Gerry.M