But surely you see it glowing at the end of each ride, to confirm it's working? So the worst you could do is one ride with no tail-light before you'd pick up the failure. I run a dynohub and have the lights on full-time so am always expecting to see the tail-light glowing whenever I get off the bike.
Riding bikes in traffic - what seems dangerous is usually safe; what seems safe is often more dangerous.
I recently made a pair of foot straps for my pedals. Few days ago I knocked on the door and asked my brother to open the garage, I thought I'd be a cool kid and attempted to ride backwards... Little did I realize that I had the straps still on my left leg, bike leaned too far left and I had my first 'crash'. Worst bit was the fact that my house is right in front of a cafe... It was full. Second I crashed I jumped up, did the classic 'anyone see that' shoulder look over and rushed into the garage with a broken pride.
Forgot to put my dentures back in after brushing my teeth this morning, got halfway to work before i realised my mouth felt different. Had to get my dad to bring them in so i could answer the phone properly and smile without scaring customers .
I never thought that's something that would happen when i was still in my 20s .
When man invented the bicycle he reached the peak of his attainments- Elizabeth West.
Failure to launch outside the bike cage at work resulted in the toe-cage 'stop, drop & roll'. Yay. The positives: I rebound better than I thought I might at this age, and no audience. But I thought you lot deserved to know
Lizzy wrote:Failure to launch outside the bike cage at work resulted in the toe-cage 'stop, drop & roll'. Yay. The positives: I rebound better than I thought I might at this age, and no audience. But I thought you lot deserved to know
is there footage on the security camera? more importantly is the new bike ok?
I had my brifter suddenly become wobbly on my new bike, it didn't seem loose, it felt more like it was broken, never had a brifter come loose before. So I thought I'd peel back the bar tape to check it out, ruined the bar tape and realised I could have just tightened it up with and allen key socket under the brake hood. So now my bar tape is held together with insulation tape and the bike is only 100km old.
Last time I checked, 2015 Distance: 1628km Time:74hr Rides: 61
Bentnose wrote:I had my brifter suddenly become wobbly on my new bike, it didn't seem loose, it felt more like it was broken, never had a brifter come loose before. So I thought I'd peel back the bar tape to check it out, ruined the bar tape and realised I could have just tightened it up with and allen key socket under the brake hood. So now my bar tape is held together with insulation tape and the bike is only 100km old.
My right brifter was loose too from new and slid down and crinkled the bar tape underneath where the brifter goes. But I don't have to see it when riding so 'tis all good.
First one cycling related. Traffic backed up for road works one afternoon. I slide up the left side of the que, unclip, stop and commence perving on the ridiculously attractive stop/go girl . As she seductively (may be my imagination) turns the sign from stop to slow, I clip in and start pedalling. While turning right and as I'm half way through saying "how you doing?" I feel the bike straighten while my upper body (and momentum) are travelling right. Next thing I know I'm doing the running man across the road in front of 20 motorists, 1 lolli pop girl and 10 or so road workers. With bike and drink bottles strewn all over the road I quickly realised that the road crew had excavated my side of the road down approx 4 inches creating a step up which straightend my front wheel up and threw me off .
Second one was many years ago whilst in my second year as an apprentice Truck Mechanic. We had a large furniture removal truck towed in overnight with a crunchy sounding gear box. When a truck is towed they usually drop the tailshaft off at the diff to prevent driveline failures. My first job was to bring the truck up to the workshop and start diagnosing the gearbox noise. Trying to be a little too clever I decided to refit the tailshaft in the workshop instead of rolling around in the dirt and gravel where the truck had been dropped. Even cleverer was the fact that I would probably have to drop it again anyway if the box had to come out. So after lugging this 80kg lump of steel 30 metres up to the workshop, I return to the truck, start the engine, select first gear and drop the clutch. Nothing. Say What? Gearbox must really be cactus. Then it hits me . So I sheepishly return to the workshop. Stand next to the tailshaft and look around to see if anyone has realised what I've done. Coast looks clear. I bend down and as I stand up with the tailshaft in my arms the entire work shop crew jumps out from behind their jobs and give me a standing ovation . Man did I feel dumb. Felt a bit better a few years later when I watched a Mechanic with many more years experience than myself do the exact same thing at a different work place. I was even kind enough to offer him a hand carrying the tailshaft to the workshop (but not back again ).
Giant TCR Advanced 1 (2014) Malvern Star XCS 5.0 MTB (2012) Malvern Star Path Racer 1 (2015) ProLite Cuneo
AKO, next time you encounter the lollipop girl, here's a line: When she turns it from stop to slow say "there's no need to rub it in"
Little Sis brought a second hand racer earlier in the week. It came with toe clips and straps. Also supplied separately was Look Keo Easy pedals, Shoes with Look Keo cleats attached and a spare set of cleats, which were SPD-SL So I'm to ride it home, I head off, putting my feet in the toe clips, tighten up the left strap was I'm riding, but I cannot get the right strap to tighten give up and stop to find the problem. Turns out to be right strap is installed upside down. OK I can understand someone installing incorrectly as its not obvious how to do a strap, but to have one correct and one upside down should be pretty obvious that one must be wrong
Just received two new identical bicycle locks. Took them out of the packets. Each had a "Code card" that you use if you ever need new keys for the lock. Great! Put them safely in the draw of no return.