speedplay keep on kovers

Questions about purchasing bicycles and parts

Re: speedplay keep on kovers

Postby Dr_Mutley » Mon Jan 14, 2013 5:27 pm

twizzle wrote:Never had a problem with the springs, in fact on a couple of occasions I re-used the old springs so I didn't have to put up with the 'bedding in' time (they clip easier when the edges of the spring are rounded off).


Wear is quite a problem if u use zeros, and have them adjusted to allow no float. After 5000km or so the no float ends up sloppy, with a combination of both rotational float, and rocking (instability) due to wear of the spring. Not really much of an issue to those who run a fair degree off float however..,
Last edited by Dr_Mutley on Mon Jan 14, 2013 10:59 pm, edited 1 time in total.
Image
Dr_Mutley
 
Posts: 2130
Joined: Fri Jan 11, 2008 1:28 pm
Location: Flagstaff Hill, Adelaide SA 5159

by BNA » Mon Jan 14, 2013 6:01 pm

BNA
 

Re: speedplay keep on kovers

Postby Baalzamon » Mon Jan 14, 2013 6:01 pm

When my new cleats arrive, I'm off to go get a bike fit done. I've got the fore/aft adapter kit which I'll have mounted already prior to going to the fit. I'll be going to see Damian Oldmeadow who I hope will take into account my metatarsal bursitis and move my cleats back away from forefeet area!
Masi Speciale CX 2008 - Brooks B17 special saddle, Garmin Edge 810
Image
Baalzamon
 
Posts: 4568
Joined: Mon Mar 12, 2007 1:23 pm
Location: Yangebup

Previous

Return to Buying a bike / parts

Who is online

Users browsing this forum: Bentnose, Duck!, Tank1252, thamete, the fat climber



Popular Bike Shops
Torpedo 7 Torpedo7 AU
Ground Effect Ground Effect NZ
Chain Reaction Cycles CRC UK
Wiggle Wiggle UK
Ebay Ebay AU



InTouch with BNA
“Bicycles BNA Twitter
“Bicycles BNA Facebook
“Google+ BNA Google+
“Bicycles BNA Newsletter