Bicycle stopping distance and road design
-
- Posts: 996
- Joined: Sun Oct 09, 2011 2:36 pm
Bicycle stopping distance and road design
Postby AndrewBurns » Wed Jan 16, 2013 8:30 am
I was riding down a long relatively shallow hill in a suburban area on my commuting bike (about 13kg, disk brakes, 28mm slick road tyres) coming up towards a roundabout. The speed limit on this road is 50 kph and due to the shallow hill I was riding I could easily hold ~45 kph along the road and so I was in the middle of the lane just as any other vehicle would be. I'm always concious of the possibility of a car entering the roundabout from my right so I was watching it like a hawk but because of houses and trees there's almost no visability to the right. Everything was clear until I was about 20m from the roundabout and then suddenly a car appeared with very little warning because of the lack of visibility. I pulled on my brakes hard, sat back over the rear of the seat to stop from going over the bars and got to the point where my rear wheel was lifting off the ground and locking and only just slowed down enough that the car made it through the roundabout before I arrived. Unfortunately there were two cars coming from the right and there was no way that I could stop dead before reaching the roundabout, luckily the other driver saw the situation I was in and slowed down to allow me to pass through the roundabout ahead of him but if he'd kept driving I would have run into him.
So my question is, what do people do in this situation? I was travelling well under the speed limit, I was very attentive and on the brakes as hard as I could be as soon as I saw another vehicle coming from the right but the bicycle simply can't slow down as fast as a car. I could of course go slower but then I risk attracting the wrath of other impatient road users and how slow is slow enough? I think part of the problem is also road design, this roundabout is probably fine for a car that can stop much faster than me but in my case the speed limit was too high for the amount of visability I had. Unfortunately there's not much that can be done about that but it does raise an interesting point, I'm sure roads and speed limits are already designed with stopping distances and visability in mind, perhaps some thought should be put into the visability a bicycle would need during the planning stage?
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Bicycle stopping distance and road design
Postby il padrone » Wed Jan 16, 2013 8:41 am
Following drivers must stay behind or overtake safely. If they get aggro, wave and blow kisses.
"An unjustified and unethical imposition on a healthy activity."
- RonK
- Posts: 11508
- Joined: Mon Aug 24, 2009 2:08 pm
- Location: If you need to know, ask me
- Contact:
Re: Bicycle stopping distance and road design
Postby RonK » Wed Jan 16, 2013 8:47 am
The speed limit is exactly that - the maximum speed at which you are permitted to travel, not the safe speed for any particular vehicle.
Slow down.
- Strawburger
- Posts: 1729
- Joined: Tue Aug 26, 2008 12:19 pm
- Location: Dulwich Hill, Sydney
Re: Bicycle stopping distance and road design
Postby Strawburger » Wed Jan 16, 2013 8:55 am
A few points:
I'm pretty sure there is a road rule based around bicycle speed approaching an intersection. You are probably going too fast.
Is this a local roundabout? Let me know the location and I'll go check it out, I am happy to help out a club/forum member!
All designs perform stopping sight (vehicle distance to stop), approach sight distance (view of the intersection linemarking) plus one for safe intersection sight distance (view to other vehicles). If this is an old intersection it may need revisiting however a bicycle should be able to stop in a shorter distance and have a more favorable viewing perspective than a car driver (unless it's a recumbent).
It's a balancing act to be fluent with the sydney traffic. My advice is don't worry about what the car drivers think of you. They will let you know in a verbal or hand gesture sometimes but it's way better than being at fault ploughing through another vehicle or save a motorist an extra 2 seconds so they can get to the next traffic light faster!
-
- Posts: 5131
- Joined: Mon Apr 20, 2009 10:41 pm
Re: Bicycle stopping distance and road design
Postby rkelsen » Wed Jan 16, 2013 8:59 am
- sogood
- Posts: 17168
- Joined: Thu Aug 31, 2006 7:31 am
- Location: Sydney AU
Re: Bicycle stopping distance and road design
Postby sogood » Wed Jan 16, 2013 9:28 am
This case brings out an interesting issue that has bugged me for a long time. The fact that currently cyclists are not required to learn road rules before getting on the road, the chance of mishaps are bound to increase, especially now more and more young inner city residents are bypassing their DL and living the green life. Further, the lack of motor vehicle driving experience, they have no ideas on the limitations of driving a motor vehicle and are more likely to put themselves in harm's way. Time has changed.
RK wrote:And that is Wikipedia - I can write my own definition.
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Bicycle stopping distance and road design
Postby il padrone » Wed Jan 16, 2013 9:33 am
"An unjustified and unethical imposition on a healthy activity."
- sogood
- Posts: 17168
- Joined: Thu Aug 31, 2006 7:31 am
- Location: Sydney AU
Re: Bicycle stopping distance and road design
Postby sogood » Wed Jan 16, 2013 9:35 am
RK wrote:And that is Wikipedia - I can write my own definition.
- RonK
- Posts: 11508
- Joined: Mon Aug 24, 2009 2:08 pm
- Location: If you need to know, ask me
- Contact:
Re: Bicycle stopping distance and road design
Postby RonK » Wed Jan 16, 2013 9:39 am
Quite so.sogood wrote:I think there's good ground to ensure cyclists going on the road are well versed in basic road rules.
- sogood
- Posts: 17168
- Joined: Thu Aug 31, 2006 7:31 am
- Location: Sydney AU
Re: Bicycle stopping distance and road design
Postby sogood » Wed Jan 16, 2013 9:39 am
RK wrote:And that is Wikipedia - I can write my own definition.
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Bicycle stopping distance and road design
Postby il padrone » Wed Jan 16, 2013 9:43 am
+1sogood wrote:Putting that aside, I think there's good ground to ensure cyclists going on the road are well versed in basic road rules.
Just suggesting that it takes more than just our inadequate driver licencing system. Safe cycling demands longer-term training (on-road) and a shift in rider attitudes.
"An unjustified and unethical imposition on a healthy activity."
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Bicycle stopping distance and road design
Postby il padrone » Wed Jan 16, 2013 9:45 am
"An unjustified and unethical imposition on a healthy activity."
- sogood
- Posts: 17168
- Joined: Thu Aug 31, 2006 7:31 am
- Location: Sydney AU
Re: Bicycle stopping distance and road design
Postby sogood » Wed Jan 16, 2013 9:46 am
RK wrote:And that is Wikipedia - I can write my own definition.
-
- Posts: 996
- Joined: Sun Oct 09, 2011 2:36 pm
Re: Bicycle stopping distance and road design
Postby AndrewBurns » Wed Jan 16, 2013 10:26 am
Here's street-view of the roundabout: https://maps.google.com.au/maps?hl=en&l ... 76,,0,3.55" onclick="window.open(this.href);return false;
As you can see there's a high fence and lots of greenery to the right so you can first see the oncoming cars as they enter the roundabout. I'd say the maximum safe speed I could approach this intersection on my bike is more like 25-30 kph.
- sogood
- Posts: 17168
- Joined: Thu Aug 31, 2006 7:31 am
- Location: Sydney AU
Re: Bicycle stopping distance and road design
Postby sogood » Wed Jan 16, 2013 10:38 am
RK wrote:And that is Wikipedia - I can write my own definition.
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Bicycle stopping distance and road design
Postby il padrone » Wed Jan 16, 2013 10:41 am
Yes, I'd say that'd be about right. I go through a roundabout just like this one near my home, maybe slightly better sight distance. Mostly I cruise along the flat road at 25-30 kmh so I don't have a huge braking issue.AndrewBurns wrote: I'd say the maximum safe speed I could approach this intersection on my bike is more like 25-30 kph.
"An unjustified and unethical imposition on a healthy activity."
- Cheesewheel
- Posts: 1209
- Joined: Wed Nov 16, 2011 9:22 pm
Re: Bicycle stopping distance and road design
Postby Cheesewheel » Wed Jan 16, 2013 10:44 am
- Strawburger
- Posts: 1729
- Joined: Tue Aug 26, 2008 12:19 pm
- Location: Dulwich Hill, Sydney
Re: Bicycle stopping distance and road design
Postby Strawburger » Wed Jan 16, 2013 10:55 am
- herzog
- Posts: 2174
- Joined: Thu Jan 29, 2009 9:50 pm
Re: Bicycle stopping distance and road design
Postby herzog » Wed Jan 16, 2013 11:06 am
High C of G
Small contact patch
High tyre pressures
No suspension
Lower mechanical advantage of brakes
We all have to allow for this in our riding.
-
- Posts: 3056
- Joined: Tue Jan 05, 2010 2:54 pm
Re: Bicycle stopping distance and road design
Postby zero » Wed Jan 16, 2013 11:34 am
Motorists can't typically negotiate the roundabout faster than you. ie if you are slowing to 30 for vision reasons on approach, they are generally slowing to 30 because of the chicane effect.AndrewBurns wrote:
So my question is, what do people do in this situation? I was travelling well under the speed limit, I was very attentive and on the brakes as hard as I could be as soon as I saw another vehicle coming from the right but the bicycle simply can't slow down as fast as a car. I could of course go slower but then I risk attracting the wrath of other impatient road users and how slow is slow enough? I think part of the problem is also road design, this roundabout is probably fine for a car that can stop much faster than me but in my case the speed limit was too high for the amount of visability I had. Unfortunately there's not much that can be done about that but it does raise an interesting point, I'm sure roads and speed limits are already designed with stopping distances and visability in mind, perhaps some thought should be put into the visability a bicycle would need during the planning stage?
If you know you want to slow, and you know you have a car behind you, stick your hand up and signal with a stopping signal before braking - along with some extravagant pantomime of looking this generally gives the impression of what you are doing. I do this occasionally when I want to brake for an obscured possibility rather than a visible danger.
-
- Posts: 9810
- Joined: Tue Dec 01, 2009 11:48 am
Re: Bicycle stopping distance and road design
Postby human909 » Wed Jan 16, 2013 11:56 am
DON'T ENDANGER YOURSELF BY GOING TOO FAST!
(I think you also need to question your driving skills if you routinely approach roundabouts at high speed! )
-
- Posts: 375
- Joined: Mon Aug 22, 2011 7:02 pm
Re: Bicycle stopping distance and road design
Postby tubby74 » Wed Jan 16, 2013 12:38 pm
This is a problem with current driver training. With even professional instructors tauting the "give way to the right" rule drivers (and many cyclists) take the approach that they won't slow down until they see that they really have to, and often then it's too late. Plenty of small suburban roundabouts have limited line of sight on the approaches,and if you are still doing 40-50 there's every chance a car will get ont he roundabout before you, hence they have right of way, and you cannot stop.sogood wrote:All roundabouts are to be approached as for a give way sign ie. Ready and able to stop on the line. Rider's and driver's responsibility.
The lack of sight seems to be designed in to many places expecting to slow drivers down but it just doesn't work. Rumble strips could help in some places but you really wouldn't want them outside your house.
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Bicycle stopping distance and road design
Postby il padrone » Wed Jan 16, 2013 12:43 pm
In contrast to some European urban roundabout designs that focus on protecting vulnerable road users and slowing the vehicular speeds.
"An unjustified and unethical imposition on a healthy activity."
- sogood
- Posts: 17168
- Joined: Thu Aug 31, 2006 7:31 am
- Location: Sydney AU
Re: Bicycle stopping distance and road design
Postby sogood » Wed Jan 16, 2013 1:20 pm
Even those aren't impediments to cycling speed. Just bunny hop! Watching hours and hours of TdF late at night aren't wasted.il padrone wrote:In contrast to some European urban roundabout designs that focus on protecting vulnerable road users and slowing the vehicular speeds.
RK wrote:And that is Wikipedia - I can write my own definition.
- herzog
- Posts: 2174
- Joined: Thu Jan 29, 2009 9:50 pm
Re: Bicycle stopping distance and road design
Postby herzog » Wed Jan 16, 2013 1:25 pm
Return to “Cycling Safety and Advocacy”
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+10:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.