Commuting Frame and Fork Replacement
- rangersac
- Posts: 1438
- Joined: Thu May 24, 2012 11:01 am
- Location: Southern Tasmania
Commuting Frame and Fork Replacement
Postby rangersac » Wed Jan 16, 2013 2:30 pm
So my trusty (or not so trusty) Orbea Aos frame has developed a lovely fatigue crack on the downtube just south of the steering tube weld. It would seem that it started on the edge of a breather hole and spread halfway around the tube before I picked it up. I guess I should count my lucky stars that a 6061 alloy didn't fail catastrophically rather than giving me a day's warning of creaks and groans! Anyway as I've only just recently replaced the drivetrain, headset bearings and seat, and the rest of the components are working just fine I'm reluctant to ditch the whole bike in favour of a new one, and would settle for a frame + fork replacement. The question is with what and is it economically sensible? A few salient points are:
1. I'm not small. 95kg, 188cm and regularly have 10+ kg on the rear rack
2. The frame/ bike gets a heavy workout on commuting duties. The daily run is 60km with plenty of uphill, downhill and choppy bitumen
3. The Aos was the first lighweight aluminium alloy frame I've used for daily transport. Probably unjustifiably I am now somewhat put off using 6061 again and am leaning towards a steelie for longevity purposes, although I am open to being convinced otherwise. I reckon the Aos frame had around 50,000km on it, in my book it should've managed at least twice that before heading off to bike heaven.
4. I prefer a flat bar road set-up for commuting, as in my opinion it's nicer for dodging traffic.
One obvious choice for a steelie would be a Surly LHT (fitted with flat bars), as it would be a pretty easy swap over of components to get back on the road. The other alternative is to get a new bike, swap out bits where necessary and flog off the surplus bits. I would definitely keep the wheels of the Aos as I replaced the stock ones with much stronger units, and as mentioned the drivetrain is practically new (although nothing super special being a mixture of Alivo and Sora components).
Budget wise a Surly frame, fork and headset will probably be around $700 so wouldn't be looking at going much more than that on any replacement bike or alternative frame and fork combo.
Any suggestions greatly appreciated!
1. I'm not small. 95kg, 188cm and regularly have 10+ kg on the rear rack
2. The frame/ bike gets a heavy workout on commuting duties. The daily run is 60km with plenty of uphill, downhill and choppy bitumen
3. The Aos was the first lighweight aluminium alloy frame I've used for daily transport. Probably unjustifiably I am now somewhat put off using 6061 again and am leaning towards a steelie for longevity purposes, although I am open to being convinced otherwise. I reckon the Aos frame had around 50,000km on it, in my book it should've managed at least twice that before heading off to bike heaven.
4. I prefer a flat bar road set-up for commuting, as in my opinion it's nicer for dodging traffic.
One obvious choice for a steelie would be a Surly LHT (fitted with flat bars), as it would be a pretty easy swap over of components to get back on the road. The other alternative is to get a new bike, swap out bits where necessary and flog off the surplus bits. I would definitely keep the wheels of the Aos as I replaced the stock ones with much stronger units, and as mentioned the drivetrain is practically new (although nothing super special being a mixture of Alivo and Sora components).
Budget wise a Surly frame, fork and headset will probably be around $700 so wouldn't be looking at going much more than that on any replacement bike or alternative frame and fork combo.
Any suggestions greatly appreciated!
De Rosa Macro | Intense Primer | Wayward Cape York | Cotic Rocket
- WestcoastPete
- Posts: 911
- Joined: Thu Mar 19, 2009 5:59 pm
- Location: Peoples Republic of Coburg, Victoria
Re: Commuting Frame and Fork Replacement
Postby WestcoastPete » Wed Jan 16, 2013 3:44 pm
- rangersac
- Posts: 1438
- Joined: Thu May 24, 2012 11:01 am
- Location: Southern Tasmania
Re: Commuting Frame and Fork Replacement
Postby rangersac » Wed Jan 16, 2013 7:55 pm
Yeah, OnOne is a good call, although unfortunately most of their frames in my size are out of stock. Dawes Galaxy is another UK touring frame that I admire, but it seems like getting them here is a PITA
De Rosa Macro | Intense Primer | Wayward Cape York | Cotic Rocket
-
- Posts: 283
- Joined: Sun Feb 22, 2009 1:36 am
Re: Commuting Frame and Fork Replacement
Postby cobba » Wed Jan 16, 2013 10:20 pm
http://www.cotic.co.uk/product/roadrat
The local distributor doesn't list this model but might be able to get one.
http://cotic.com.au/contact/
tom@cotic.com.au
The local distributor doesn't list this model but might be able to get one.
http://cotic.com.au/contact/
tom@cotic.com.au
- Chef
- Posts: 772
- Joined: Tue Dec 29, 2009 7:11 pm
- Location: Perth WA
Re: Commuting Frame and Fork Replacement
Postby Chef » Wed Jan 16, 2013 10:46 pm
Have you tried here for on one frames? http://www.raceworx.com.au/products/On% ... mpino.html
Looks like they have stock....
Cheers
Looks like they have stock....
Cheers
- twizzle
- Posts: 6402
- Joined: Wed Aug 13, 2008 11:45 am
- Location: Highlands of Wales.
Re: Commuting Frame and Fork Replacement
Postby twizzle » Wed Jan 16, 2013 10:50 pm
A Ribble Audax/winter frame plus fork and headset is about $350 delivered.
Sent from my iThingy...
Sent from my iThingy...
I ride, therefore I am. But don't ride into harm's way.
...real cyclists don't have squeaky chains...
...real cyclists don't have squeaky chains...
- WestcoastPete
- Posts: 911
- Joined: Thu Mar 19, 2009 5:59 pm
- Location: Peoples Republic of Coburg, Victoria
Re: Commuting Frame and Fork Replacement
Postby WestcoastPete » Thu Jan 17, 2013 1:53 am
Soma might ride a bit livelier than a LHT I reckon, and about the same price from the local distributor.
Sent from my GT-I9100 using Tapatalk 2
Sent from my GT-I9100 using Tapatalk 2
- silentbutdeadly
- Posts: 2294
- Joined: Fri Apr 09, 2010 9:52 am
- Location: Somewhere flat...
Re: Commuting Frame and Fork Replacement
Postby silentbutdeadly » Thu Jan 17, 2013 9:41 am
Gemini's Vivente World Randonneur is available as frame and fork only in the bigger sizes for $650 and they have a Tasmanian dealer (Launceston)
http://www.viventebikes.com/main/page_p ... _list.html" onclick="window.open(this.href);return false;
http://www.viventebikes.com/main/page_p ... _list.html" onclick="window.open(this.href);return false;
Ours is not to reason why...merely to point and giggle
- rangersac
- Posts: 1438
- Joined: Thu May 24, 2012 11:01 am
- Location: Southern Tasmania
Re: Commuting Frame and Fork Replacement
Postby rangersac » Thu Jan 17, 2013 12:51 pm
Thanks for the replies from all.
All of the Cotic, Soma and Viviente look interesting and fairly easily accessible. Particularly the Viviente given the Tassie distributor, and inclusion of seatpost into the price. Given they have 2012 stock I might see if they can cut me a deal!
Single speed frame unfortunately and I don't rate bolt on derailleur hangersChef wrote:Have you tried here for on one frames? http://www.raceworx.com.au/products/On% ... mpino.html" onclick="window.open(this.href);return false;
I've always admired these frames, but I'm not sure if they'd be up for the full rack and weight duties day in day out.twizzle wrote:A Ribble Audax/winter frame plus fork and headset is about $350 delivered.
All of the Cotic, Soma and Viviente look interesting and fairly easily accessible. Particularly the Viviente given the Tassie distributor, and inclusion of seatpost into the price. Given they have 2012 stock I might see if they can cut me a deal!
De Rosa Macro | Intense Primer | Wayward Cape York | Cotic Rocket
-
- Posts: 283
- Joined: Sun Feb 22, 2009 1:36 am
Re: Commuting Frame and Fork Replacement
Postby cobba » Thu Jan 17, 2013 1:12 pm
You could cross the Cotic Roadrat off the list, it uses a chaintug with a derailleur hangerrangersac wrote: Single speed frame unfortunately and I don't rate bolt on derailleur hangers
http://www.cotic.co.uk/product/interfac ... echtug.jpg
https://www.cotic.co.uk/order/item/thum ... aintug.jpg
- rangersac
- Posts: 1438
- Joined: Thu May 24, 2012 11:01 am
- Location: Southern Tasmania
Re: Commuting Frame and Fork Replacement
Postby rangersac » Thu Jan 17, 2013 2:09 pm
Good call re: the roadrat, didn't immediately spot the bolt on hanger. Their cyclocross frame looks nice, but their general frame warranty leaves a bit to be desired IMHO.
De Rosa Macro | Intense Primer | Wayward Cape York | Cotic Rocket
Return to “Buying a bike / parts”
Jump to
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+10:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
Brought to you by Bicycles Network Australia | © 1999 - 2024 | Powered by phpBB ®
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.