Does anyone know if a Gates belt drive setup can be used to drive the Shimano Alfine 700 or the Rohloff 14 speed?
Thanks
Gates belt drive - ShimanoSG-700Alfine compatibility?
-
- Posts: 2
- Joined: Mon Dec 10, 2012 8:24 pm
- il padrone
- Posts: 22931
- Joined: Mon Apr 07, 2008 11:57 pm
- Location: Heading for home.
Re: Gates belt drive - ShimanoSG-700Alfine compatibility?
Postby il padrone » Fri Jan 25, 2013 2:03 pm
Some discussion from the Thorn Forum about this, and more specifically a response from a manufacturer. It seems that with a Rohloff, to retain their very valuable worldwide warranty, you'd need the conversion to be done by Rohloff and using a frame that would meet their specs for rigidity.
Probably cheaper and easier to get a bike that is already designed for it. There are such, but most are sold out of Europe and will cost $$$$.
Tout Terrain Silk Road
<too big image removed>
Retrofitting to the Alfine 11 I know little about, but it may be an easier task
Probably cheaper and easier to get a bike that is already designed for it. There are such, but most are sold out of Europe and will cost $$$$.
Tout Terrain Silk Road
<too big image removed>
Retrofitting to the Alfine 11 I know little about, but it may be an easier task
Last edited by il padrone on Fri Jan 25, 2013 2:10 pm, edited 1 time in total.
Mandatory helmet law?
"An unjustified and unethical imposition on a healthy activity."
"An unjustified and unethical imposition on a healthy activity."
-
- Posts: 260
- Joined: Wed Dec 12, 2012 3:57 pm
Re: Gates belt drive - ShimanoSG-700Alfine compatibility?
Postby Sparx » Fri Jan 25, 2013 2:07 pm
I have an Avanti Inc 3 which has an Alfine 11 speed hub and Gates CDX belt drive
-
- Posts: 2
- Joined: Mon Dec 10, 2012 8:24 pm
Re: Gates belt drive - ShimanoSG-700Alfine compatibility?
Postby polydexta » Sat Jan 26, 2013 7:42 am
Thanks for the tips. Great places to start.
Sent from my iPad using Tapatalk HD
Sent from my iPad using Tapatalk HD
- find_bruce
- Moderator
- Posts: 10575
- Joined: Mon May 09, 2011 8:42 pm
- Location: Sydney
Re: Gates belt drive - ShimanoSG-700Alfine compatibility?
Postby find_bruce » Sat Jan 26, 2013 10:22 am
Fitting a belt drive to an Alfine 8 or 11 is reported to be fairly straight forward.
A Di2 (electronic shifting) Alfine is much more problematic, although apparently it is possible, at least if you have access to a machine shop.
A Di2 (electronic shifting) Alfine is much more problematic, although apparently it is possible, at least if you have access to a machine shop.
- AUbicycles
- Site Admin
- Posts: 15581
- Joined: Tue Aug 23, 2005 2:14 am
- Location: Sydney & Frankfurt
- Contact:
Re: Gates belt drive - ShimanoSG-700Alfine compatibility?
Postby AUbicycles » Sat Jan 26, 2013 4:38 pm
Agree with il padrone, working with a frame designed for a carbon drive will save time and money.
Cycling is in my BNA
- outnabike
- Posts: 2455
- Joined: Tue Jan 08, 2013 2:53 pm
- Location: Melbourne Vic
Re: Gates belt drive - ShimanoSG-700Alfine compatibility?
Postby outnabike » Sat Jan 26, 2013 6:36 pm
Hi polydexta,
This company seems to have some clues on installation.
http://www.stkildacycles.com.au/gates-belt-drive-" onclick="window.open(this.href);return false;
http://www.stkildacycles.com.au/rohloff" onclick="window.open(this.href);return false;
This company seems to have some clues on installation.
http://www.stkildacycles.com.au/gates-belt-drive-" onclick="window.open(this.href);return false;
http://www.stkildacycles.com.au/rohloff" onclick="window.open(this.href);return false;
Vivente World Randonneur complete with panniers
-
- Posts: 2004
- Joined: Wed Jan 09, 2008 9:20 pm
Re: Gates belt drive - ShimanoSG-700Alfine compatibility?
Postby Crawf » Sat Jan 26, 2013 9:22 pm
Yes straight fit, 3 spline, fits on as you would with a normal chained sprocket.polydexta wrote:Does anyone know if a Gates belt drive setup can be used to drive the Shimano Alfine 700 or the Rohloff 14 speed?
Thanks
- WestcoastPete
- Posts: 911
- Joined: Thu Mar 19, 2009 5:59 pm
- Location: Peoples Republic of Coburg, Victoria
Re: Gates belt drive - ShimanoSG-700Alfine compatibility?
Postby WestcoastPete » Sat Jan 26, 2013 10:06 pm
St Kilda Cycles built my touring bike up with a Rohloff and Gates Belt Drive. It's a modified Charge Duster. I love it. I'd get the Center Trak if I were doing it again, but the extra 2mm width of the belt might cause problems on a modified frame.
http://www.crazyguyonabike.com/doc/page ... 85919&v=LC" onclick="window.open(this.href);return false;
http://www.crazyguyonabike.com/doc/page ... 85919&v=LC" onclick="window.open(this.href);return false;
Return to “Buying a bike / parts”
Jump to
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Cycling Brands
- Cannondale
- Garmin
- Giant
- Shimano
- Trek
Who is online
Users browsing this forum: Duck!, Majestic-12 [Bot]
- All times are UTC+11:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
Brought to you by Bicycles Network Australia | © 1999 - 2024 | Powered by phpBB ®
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.