The Bare Frame and Fork Weight Thread
48 posts
• Page 2 of 2 • 1, 2
Re: The Bare Frame and Fork Weight Thread58cm Eddie Merckx Strada - Frame 2080 + Forks 700 = Total 2780g
54 X 55cm Shogun Celeste Beau - Frame 1880 + Forks 750 = 2630g Approx 58cm Malvern Star Army Bike - Frame 3050 + Forks (with brace) 1170 = 4220g LG = Low Gear
Re: The Bare Frame and Fork Weight ThreadPaino 52cm + forks = 2285g columbus 80's tubing.
Re: The Bare Frame and Fork Weight ThreadEarly 80’s Geoff Scott Clamont, 61cm – Tange Champion? Frame – 1940g, fork – 770g;
1985 Kuwahara Apollo V, 58.5cm – Ishiwata? – Frame – 2200g, fork – 700g. ![]()
Re: The Bare Frame and Fork Weight Thread1976 56.5cm Benotto 2500 Chromevelato- 2.7kgs fork & frame, Colombus tube.
Re: The Bare Frame and Fork Weight ThreadRicardo Elite.mid eighties 23” frame, Tange 5 PG tubing. Weights
- Frame – 2205g - Fork - 685g ![]()
Re: The Bare Frame and Fork Weight ThreadMid 80s Repco Traveller, 54cm top tube, 48.5cm seat tube.
Frame 2614g Forks 727.8g (very accurate scales at work When man invented the bicycle he reached the peak of his attainments- Elizabeth West.
Re: The Bare Frame and Fork Weight ThreadI KNOW ITS CARBON, but it will be good to compare.
I'm off riding for 3 weeks due to minor leg surgery so the Viner is getting an update. Fork 393 Frame 1029 (with two head bearimgs) Total 1422g ![]() It came in at 7.9KG when it was Sram Rival equipped, stay tuned.
Re: The Bare Frame and Fork Weight ThreadSchwinn Paramount frame and fork (damaged)
22 1/2 in Columbus SLX fork---- 698 grams frame--- approx. 2000 grams cycles gitane There is NO room in the shed for the next bike! New shed rqd.
Re: The Bare Frame and Fork Weight Thread![]() Hetchins frame & fork with headset 3.05kg
Re: The Bare Frame and Fork Weight Thread2012 Malvern Star C6....
No lightweight for a carbon frame set but love the colour scheme!! Frame with head bearings 1220g Forks 475g
Re: The Bare Frame and Fork Weight Thread2002 Bianchi Talledega, 63 cm
Frame: 1885g Fork: 638g
Re: The Bare Frame and Fork Weight Thread1940s Speedwell Super Club
Frame: 2600g Fork: 950g
Re: The Bare Frame and Fork Weight ThreadEarly 80's(?) Tandem frame 531 Tandem tubing - 5kg
As far as I can tell it is a custom build by Pete Corbin from Sydney. Forgot to weigh the forks - sorry. They are also 531 Tandem tubing. The previous owner reckons that it was 1996 however the 126mm rear spacing and the top of BB cable guides suggest otherwise to me. Possibly NOS at the time. Cheers, Cameron
Re: The Bare Frame and Fork Weight Thread89 Centurion Carbon
91 Peugeot Izoard 91 Giant Cadex 980c
The Bare Frame and Fork Weight ThreadRebuilding the tamari. 56 square steel frame - 1823g. Fork 647g. That's a 2470g frameset. Did I mention its steel?
I'll post a 'how to weigh your frame and fork' guide in The Shed soon.
Re: The Bare Frame and Fork Weight Thread1994 Scott AFD 501, Tange Prestige oversize tubing, 58.5cm ST 56cm TT.
2055.6 grams (feels very light, that was surprising). The forks were branded 'SRPR cromo 760 gr' and the steerer stamping shows it was made by Spinner (known for MTB forks). They actually came in at 732.8 grams. ![]() When man invented the bicycle he reached the peak of his attainments- Elizabeth West.
Re: The Bare Frame and Fork Weight Thread1989 sr sakae litage - 54cm square frameset.
frame and fork - 2300g. internet experts: ruining bikes since '10 | http://www.redbubble.com/people/munga
Re: The Bare Frame and Fork Weight Thread
753 is gaspipe where you come from?! Jim MY RIDES: My Velospace Profile
Re: The Bare Frame and Fork Weight ThreadTroll land
It's a lovely frame, I can't decide whether I'm brave enough to ride it around with 130mm hub jammed in or find a 126mm 8 speed setup. I've read due to the heat treating 753 can crack when you jam 130mm in 126 stays and ride it around for a prolonged time. But I've seen no evidence yet and that's probably one persons opinion that has been copied and pasted over and over in internet forum land.. Anyway, back on topic!
Re: The Bare Frame and Fork Weight Thread1980's Hendry custom built 57cm sq - don't know what tubing as it was given to me when I was volunteering at a community bike workshop. All I know is it's double/triple butted, has Zeus 2000 dropouts and takes a 27.0 seatpost which took a while to find.
frame: 1,950g fork: 675g = 2,625g this was earlier tonight as fixed a few hours later to be converted back to former glory with gears ready for the Whittlesea Challenge ride this Sunday gruppo - shimano 600 tricolour (courtesy of Dan) wheelset - record hubs laced to mavic super champion tubulars (spare set from my LeJeune courtesy of timbercomp) 1972 LeJeune World Champion - Nuovo Record
1980's Hendry custom built - Tricolour 600
Re: The Bare Frame and Fork Weight ThreadPeugeot 54 tt, Possibly super vitus tubes - frame 1720g fork- 623g .....the lack of a seat clamp must help
![]() I spent most of my money on booze, girls and bikes. The rest I just squandered...
Re: The Bare Frame and Fork Weight ThreadWhen man invented the bicycle he reached the peak of his attainments- Elizabeth West.
48 posts
• Page 2 of 2 • 1, 2
Who is onlineUsers browsing this forum: No registered users |
Top Bikes & Gear
Exclusive: BNA 10% discount for ProBikeKit |