Bryron Rider 40 setup problems
-
- Posts: 288
- Joined: Mon Mar 26, 2012 3:25 pm
- Location: Melbourne
Bryron Rider 40 setup problems
Postby 4xsama » Sat Jan 19, 2013 7:30 pm
Hi,
I am trying to setup a Bryton 40 but can't get a reading on the monitor.
Cadence and speed magnets are making the receiver flash red and green respectively but for some reason the monitor doesn't display. As I am indoors is there a GPS issue or is there alternatively a mode problem (I am in METER mode).
Cheers
I am trying to setup a Bryton 40 but can't get a reading on the monitor.
Cadence and speed magnets are making the receiver flash red and green respectively but for some reason the monitor doesn't display. As I am indoors is there a GPS issue or is there alternatively a mode problem (I am in METER mode).
Cheers
CANYON Inflite AL SLX 8.0 Pro Race. Pivot Mach 429 Trail
-
- Posts: 45
- Joined: Sat Jun 02, 2012 9:04 pm
Re: Bryron Rider 40 setup problems
Postby ianK » Sat Jan 26, 2013 7:37 am
Are the speed and cadence sensors switched on? Check settings - sensors. Rescanning the sensors might also sort it out.
-
- Posts: 736
- Joined: Thu Jul 21, 2011 7:09 pm
Re: Bryron Rider 40 setup problems
Postby Wal42 » Sat Jan 26, 2013 9:43 am
That's what happened with my 3 month old one before I fixed it permanently with a hammer & bought the other brand starting with G, 16 months down the track & the other one has performed virtually faultlessly. Probably not what you want to hear though.
-
- Posts: 288
- Joined: Mon Mar 26, 2012 3:25 pm
- Location: Melbourne
Re: Bryron Rider 40 setup problems
Postby 4xsama » Sun Jan 27, 2013 12:33 pm
Yeah, not really. Thanks for the post though. I really like your AvatarWal42 wrote:That's what happened with my 3 month old one before I fixed it permanently with a hammer & bought the other brand starting with G, 16 months down the track & the other one has performed virtually faultlessly. Probably not what you want to hear though.
CANYON Inflite AL SLX 8.0 Pro Race. Pivot Mach 429 Trail
-
- Posts: 668
- Joined: Thu Mar 26, 2009 5:33 pm
Re: Bryron Rider 40 setup problems
Postby DarrylH » Sun Jan 27, 2013 1:50 pm
Don't ditch it - my Bryton 35 is now 21 months old and still has great battery life.
- clackers
- Posts: 2065
- Joined: Mon May 16, 2011 10:48 am
- Location: Melbourne
Re: Bryron Rider 40 setup problems
Postby clackers » Sun Jan 27, 2013 7:02 pm
4xsama, did you check that the sensor has been detected as Ian suggested?
You should see the speed/cadence icons on the display.
You should see the speed/cadence icons on the display.
-
- Posts: 288
- Joined: Mon Mar 26, 2012 3:25 pm
- Location: Melbourne
Re: Bryron Rider 40 setup problems
Postby 4xsama » Sun Jan 27, 2013 8:51 pm
No. Is there a reboot or format function?clackers wrote:4xsama, did you check that the sensor has been detected as Ian suggested?
You should see the speed/cadence icons on the display.
I see the lights flick over at the appropriate times so I guess the reader reads. Whether the sender sends or displayer displays is up in the air.
It's like the light are on but nobodies home.
CANYON Inflite AL SLX 8.0 Pro Race. Pivot Mach 429 Trail
- clackers
- Posts: 2065
- Joined: Mon May 16, 2011 10:48 am
- Location: Melbourne
Re: Bryron Rider 40 setup problems
Postby clackers » Sun Jan 27, 2013 11:41 pm
Take up Ian's suggestion to Rescan. The ID of the sensor should be revealed. If not, change the battery as a first step.
-
- Posts: 288
- Joined: Mon Mar 26, 2012 3:25 pm
- Location: Melbourne
Re: Bryron Rider 40 setup problems
Postby 4xsama » Mon Jan 28, 2013 7:48 pm
Fixed. Cheers.ianK wrote:Are the speed and cadence sensors switched on? Check settings - sensors. Rescanning the sensors might also sort it out.
Rescan worked.
Can I load up the odo reading from my Cateye so I don't restart from 0km's.
CANYON Inflite AL SLX 8.0 Pro Race. Pivot Mach 429 Trail
- clackers
- Posts: 2065
- Joined: Mon May 16, 2011 10:48 am
- Location: Melbourne
Re: Bryron Rider 40 setup problems
Postby clackers » Tue Jan 29, 2013 10:06 pm
Don't think so. But could be wrong.4xsama wrote:Fixed. Cheers.ianK wrote:Are the speed and cadence sensors switched on? Check settings - sensors. Rescanning the sensors might also sort it out.
Rescan worked.
Can I load up the odo reading from my Cateye so I don't restart from 0km's.
-
- Posts: 5
- Joined: Sun Dec 02, 2012 4:35 pm
Re: Bryron Rider 40 setup problems
Postby beroz » Tue Jan 29, 2013 10:52 pm
Try settings, bike profile,overview, select bike 1 or bike2, odo.
Sent from my HTC One X using Tapatalk 2
Sent from my HTC One X using Tapatalk 2
-
- Posts: 288
- Joined: Mon Mar 26, 2012 3:25 pm
- Location: Melbourne
Re: Bryron Rider 40 setup problems
Postby 4xsama » Thu Jan 31, 2013 9:28 pm
Nope!beroz wrote:Try settings, bike profile,overview, select bike 1 or bike2, odo.
Sent from my HTC One X using Tapatalk 2
IS it just me or does Bryton have pretty crap*y instructions.
CANYON Inflite AL SLX 8.0 Pro Race. Pivot Mach 429 Trail
- clackers
- Posts: 2065
- Joined: Mon May 16, 2011 10:48 am
- Location: Melbourne
Re: Bryron Rider 40 setup problems
Postby clackers » Thu Jan 31, 2013 9:46 pm
They are still crappy, even by Taiwanese standards.4xsama wrote:
IS it just me or does Bryton have pretty crap*y instructions.
The Swiss Garmin documentation must surely be better!
Jump to
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+11:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
Brought to you by Bicycles Network Australia | © 1999 - 2024 | Powered by phpBB ®
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.