Latest Reviews and Articles
Will your next bike be Intelligent? ABS and Smart Bike Tech
Vitus Vitesse EVO Disc Review – Speed Machine indeed!
New Wheels....
-
- Posts: 29
- Joined: Wed Sep 19, 2012 3:48 pm
- Location: Irishman in Perth
New Wheels....
Postby Hughesy » Sat Feb 02, 2013 8:20 pm
need your expert advice again....
I have my Specialized Tarmac Sport 6 months now and I am trying to tweak it to make it a little lighter/better...
So I thought I would upgrade the wheels....
The bike cost my over $2k so I was thinking around $500 for decent wheels???
I am just wondering if you:
1. think this is a good idea
2. can recommend any for around the price range or a little over/under...
initial thoughts are that "these" have a good price tag and review but I am out of my depth so please help.
any advise is welcome.
Hughesy
-
- Posts: 965
- Joined: Sun Aug 10, 2008 4:48 pm
Re: New Wheels....
Postby antipodean » Sat Feb 02, 2013 8:38 pm
2013 Boardman CX Pro
2012 KHS Yuma 29er
-
- Posts: 461
- Joined: Sun Feb 19, 2012 11:54 pm
Re: New Wheels....
Postby jamesn184 » Sun Feb 03, 2013 8:16 am

-
- Posts: 9576
- Joined: Thu Feb 24, 2011 3:40 pm
- Location: Brisbane
Re: New Wheels....
Postby jasonc » Sun Feb 03, 2013 8:52 am
jamesn184 wrote:I'll beat jacks to it and say prolite's
I saw this thread earlier and thought I'd leave it to him.
But +1 to the bracciano's
EDIT: It's worth noting that there are currently lots of deals e.g. probikekit have the ultegra 6700 wheelset for $330
I don't know how they compare to the Bracciano's

-
- Posts: 587
- Joined: Fri Jun 10, 2011 8:37 pm
- Location: Adelaide
- Contact:
Re: New Wheels....
Postby TDC » Sun Feb 03, 2013 9:24 am
jasonc wrote:jamesn184 wrote:I'll beat jacks to it and say prolite's
I saw this thread earlier and thought I'd leave it to him.
But +1 to the bracciano's
EDIT: It's worth noting that there are currently lots of deals e.g. probikekit have the ultegra 6700 wheelset for $330
I don't know how they compare to the Bracciano's
Review of them in Bike Radar today,
http://www.bikeradar.com/road/gear/cate ... t-13-46924
-
- Posts: 29
- Joined: Wed Sep 19, 2012 3:48 pm
- Location: Irishman in Perth
Re: New Wheels....
Postby Hughesy » Sun Feb 03, 2013 6:52 pm
They look very nice but where can you get them and how much???
-
- Posts: 965
- Joined: Sun Aug 10, 2008 4:48 pm
Re: New Wheels....
Postby antipodean » Sun Feb 03, 2013 6:58 pm
2013 Boardman CX Pro
2012 KHS Yuma 29er
-
- Moderator
- Posts: 959
- Joined: Mon Dec 12, 2005 5:42 pm
- Location: sydney
Re: New Wheels....
Postby timbo » Sun Feb 03, 2013 7:10 pm
Are you desperate for a new wheelset, or are you just wondering. First thoughts would be different tyres, as this would make a difference if you find a good set of tyres, and if you still have money left over then a whole new wheelset could be an option. Be mindful that what is a good wheelset or just a new set of tyres has as many opinions as there are posters on the website.
I'd try a new lighter set of tyres first, but if your still desperate for more, go the whole wheelset, but keep in mind you will need tyres, tubes, rimtape and a cluster to make the wheelset complete.
Go ahead and spend what you are comfortable with, but keep in mind, if you leave it to us, we will spend your whole paypacket. That's what we are good at, spending other peoples money.

Let us know how you get on.
-
- Posts: 9576
- Joined: Thu Feb 24, 2011 3:40 pm
- Location: Brisbane
Re: New Wheels....
Postby jasonc » Sun Feb 03, 2013 7:52 pm
timbo wrote:That's what we are good at, spending other peoples money.![]()
we sure are. give us half a budget and we can double it in 3 clicks.

- KenGS
- Posts: 1474
- Joined: Thu Sep 10, 2009 10:31 pm
- Location: Rosanna, Victoria
Re: New Wheels....
Postby KenGS » Sun Feb 03, 2013 8:57 pm
timbo wrote:Hughesy, your bike has Shimano components, so the wheels you first thought about (Campagnolo Zonda's) won't be compatible with your Shimano groupset.
That's odd. I bought Campag Zonda's specifying the Shimano freehub option for my Specialized Roubaix. They even included the spacer needed to for a 10-speed cassette as the weehls are compatible with the new 11-speed Shimano.
I also considered the Braccianos but went with the Zondas just to annoy the purists by mixing Campag and Shimano. I also changed over to GP4000s as I had a set lying around,. They are lighter then the Espoir Sport tyres with their wire bead.
Helmets! Bells! Rego!
-
- Posts: 29
- Joined: Wed Sep 19, 2012 3:48 pm
- Location: Irishman in Perth
Re: New Wheels....
Postby Hughesy » Sun Feb 03, 2013 9:06 pm
antipodean wrote:All the info is on that link, they come from Singapore and cost $530US delivered.
Thanks mate, sorry for being lazy i didn't even check the website.
-
- Posts: 29
- Joined: Wed Sep 19, 2012 3:48 pm
- Location: Irishman in Perth
Re: New Wheels....
Postby Hughesy » Sun Feb 03, 2013 9:23 pm
timbo wrote:Are you desperate for a new wheelset, or are you just wondering
not desperate... just had my b'day so have some cash and would like to make improvements to the bike... from reading here/magazines/other websites it seems that wheels are where most manufactures skimp on quality... hence why I suggested them but very open to ideas...
limbo wrote:go the whole wheelset, but keep in mind you will need tyres, tubes, rimtape and a cluster to make the wheelset complete.
that sounds expensive

I just bought a new tyre (I had a chunk of glass in the old one)... but just a cheap one to keep my going... what did you have in mind?timbo wrote:I'd try a new lighter set of tyres first
-
- Posts: 654
- Joined: Sun Jul 25, 2010 8:58 pm
- Location: Chatswood, NSW
Re: New Wheels....
Postby NhiTrac » Sun Feb 03, 2013 10:48 pm
Previously owned a set of S4.0s. Everything about them was horrible from the product itself to the rubbish service provided by Sean.
In short, within the first 6 months...
- wheels often flexed and rubbed on brake pads
- 3 snapped spokes.
- he blamed me for riding in the wet and didn't dry them properly. Say What?
- short unhelpful replies.
- last straw was him going on about his whole personal life, in response to my criticism about his product and services.
A search of the net will show a lot of happy customers, but also a lot of unhappy ones. Never again for me.
- jacks1071
- Posts: 3064
- Joined: Thu Aug 20, 2009 9:47 pm
- Location: Mackay, QLD
- Contact:
Re: New Wheels....
Postby jacks1071 » Sun Feb 03, 2013 11:58 pm
Hughesy wrote:timbo wrote:Are you desperate for a new wheelset, or are you just wondering
not desperate... just had my b'day so have some cash and would like to make improvements to the bike... from reading here/magazines/other websites it seems that wheels are where most manufactures skimp on quality... hence why I suggested them but very open to ideas...limbo wrote:go the whole wheelset, but keep in mind you will need tyres, tubes, rimtape and a cluster to make the wheelset complete.
that sounds expensiveI just bought a new tyre (I had a chunk of glass in the old one)... but just a cheap one to keep my going... what did you have in mind?timbo wrote:I'd try a new lighter set of tyres first
You can re-use your cassette & tyres etc unless you plan to have two sets of wheels setup ready to ride (which is nice).
I can supply Bracciano's setup ready to ride if that'd help you out. Can supply with the cassette, tyres and tubes all torqued up and ready to ride, just add air

-
- Posts: 9576
- Joined: Thu Feb 24, 2011 3:40 pm
- Location: Brisbane
Re: New Wheels....
Postby jasonc » Mon Feb 04, 2013 8:18 am
jacks1071 wrote:I can supply Bracciano's setup ready to ride if that'd help you out. Can supply with the cassette, tyres and tubes all torqued up and ready to ride, just add air
air too expensive to supple these days Deon?


- sblack
- Posts: 1321
- Joined: Mon Aug 10, 2009 3:38 pm
Re: New Wheels....
Postby sblack » Mon Feb 04, 2013 10:01 am
NhiTrac wrote:
Previously owned a set of S4.0s. Everything about them was horrible from the product itself to the rubbish service provided by Sean.
In short, within the first 6 months...
- wheels often flexed and rubbed on brake pads
- 3 snapped spokes.
- he blamed me for riding in the wet and didn't dry them properly. WT??
- short unhelpful replies.
- last straw was him going on about his whole personal life, in response to my criticism about his product and services.
A search of the net will show a lot of happy customers, but also a lot of unhappy ones. Never again for me.
I'm another unhappy Soul customer. My experience wasn't as bad as NhiTrac's but I still wouldn't recommend them.
Firstly, there where several delays in the wheels being built in the first place with the expected date being revised back a few months in the process.
Initial impressions of the wheels where fine, finish wasn't top notch but they are a cheap wheelset so I was satisfied. However, within a few hundered kilometres my drivetrain started making some clicking noises as well as the occaisonal clunk. The noises where too intermittent and couldn't be replicated off the bike so I struggled to find the cause. They increased in frequency and then the freehub started having issues. After tough climbs it would lock on and not freewheel and at other times it would slip a little before engaging again. The wheel was less than a year old and around 5000km on it. While my wheels wheren't the 2.0 suggested in this thread they did have the same Prodigy V3 hubs.
Pulling it apart the freehub was a mess with chunks out of it and the area where the pawls joined the body misshaped and preventing free movement of the pawls. I sent photos to Sean and he sent a replacement however upon fitting the freehub body was catching on the star ratchet. I got a wheel to borrow while I sent the Soul back to be repaired/replaced. All my mystery noises disappeared. Meanwhile Sean repaired the wheel, saying he'd never seen a star ratchet in that condition but other than quesioning my weight, which at mid 70s he agreed would not be an issue, he could come up with no reasoning as to why it would be in such a state.
The repaired wheel lasted less than 50km before the first clunk and before long the intermittant clicking was back as well. At that point I decided it wasn't worth sending back again and decided on purchasing some new wheels and relegatting the Souls to an emergency spare set. While they may have lasted several thousand kilometres making the noises last time I didn't want to take the risk of heading down to the Alpine Classic and have the freehub start playing up halfway through the ride, or on any other 200+km Audax ride.

- jacks1071
- Posts: 3064
- Joined: Thu Aug 20, 2009 9:47 pm
- Location: Mackay, QLD
- Contact:
Re: New Wheels....
Postby jacks1071 » Mon Feb 04, 2013 2:47 pm
jasonc wrote:jacks1071 wrote:I can supply Bracciano's setup ready to ride if that'd help you out. Can supply with the cassette, tyres and tubes all torqued up and ready to ride, just add air
air too expensive to supple these days Deon?

-
- Posts: 1591
- Joined: Wed Feb 13, 2008 10:42 am
- Location: Red Hill, Brisbane
Re: New Wheels....
Postby petal665 » Mon Feb 04, 2013 3:06 pm
timbo wrote:Hughesy, your bike has Shimano components, so the wheels you first thought about (Campagnolo Zonda's) won't be compatible with your Shimano groupset.
http://www.evanscycles.com/products/cam ... t-ec028427
http://www.wiggle.co.uk/campagnolo-zond ... lset-2012/
http://www.slanecycles.com/campagnolo-z ... 21963.html
http://www.chainreactioncycles.com/Mode ... elID=88911
Even the link in the OP shows the Shimano freehub option.

- MarkG
- Posts: 2147
- Joined: Mon Mar 28, 2011 2:02 pm
- Location: Perth, Australia
Re: New Wheels....
Postby MarkG » Mon Feb 04, 2013 5:07 pm
You can ride Campy wheels with Shimano, just swap the hub and cluster.
I used to run MOst wheels on my Sram eqiupped Felt.
-
- Posts: 29
- Joined: Wed Sep 19, 2012 3:48 pm
- Location: Irishman in Perth
Re: New Wheels....
Postby Hughesy » Mon Feb 04, 2013 11:18 pm
NhiTrac wrote:
Previously owned a set of S4.0s. Everything about them was horrible from the product itself to the rubbish service provided by Sean.
In short, within the first 6 months...
- wheels often flexed and rubbed on brake pads
- 3 snapped spokes.
- he blamed me for riding in the wet and didn't dry them properly. WT??
- short unhelpful replies.
- last straw was him going on about his whole personal life, in response to my criticism about his product and services.
A search of the net will show a lot of happy customers, but also a lot of unhappy ones. Never again for me.
thanks for the heads up
-
- Posts: 312
- Joined: Tue Jul 24, 2012 12:01 pm
- Location: Sydney
Re: New Wheels....
Postby george-bob » Tue Feb 05, 2013 4:18 pm
oh and they look AWESOME on my bike

-
- Posts: 29
- Joined: Wed Sep 19, 2012 3:48 pm
- Location: Irishman in Perth
Re: New Wheels....
Postby Hughesy » Tue Feb 05, 2013 10:54 pm
jacks1071 wrote:Hughesy wrote:timbo wrote:Are you desperate for a new wheelset, or are you just wondering
not desperate... just had my b'day so have some cash and would like to make improvements to the bike... from reading here/magazines/other websites it seems that wheels are where most manufactures skimp on quality... hence why I suggested them but very open to ideas...limbo wrote:go the whole wheelset, but keep in mind you will need tyres, tubes, rimtape and a cluster to make the wheelset complete.
that sounds expensiveI just bought a new tyre (I had a chunk of glass in the old one)... but just a cheap one to keep my going... what did you have in mind?timbo wrote:I'd try a new lighter set of tyres first
You can re-use your cassette & tyres etc unless you plan to have two sets of wheels setup ready to ride (which is nice).
I can supply Bracciano's setup ready to ride if that'd help you out. Can supply with the cassette, tyres and tubes all torqued up and ready to ride, just add air
thanks for your help Deon, can you give me a full price inc. Del please?
Also are you able to advise what the weight difference would be? Just so I know what I am paying for... Value for $

thanks.
PM me if you prefer.
- jacks1071
- Posts: 3064
- Joined: Thu Aug 20, 2009 9:47 pm
- Location: Mackay, QLD
- Contact:
Re: New Wheels....
Postby jacks1071 » Wed Feb 06, 2013 12:30 am
Hughesy wrote:
thanks for your help Deon, can you give me a full price inc. Del please?
Also are you able to advise what the weight difference would be? Just so I know what I am paying for... Value for $
thanks.
PM me if you prefer.
Sure.
Bracciano Wheelset $399
Ultegra 6700 cassette $75
Delivery to WA $33
Total: $507.00
Weight, for want of a better source your existing wheels according to this source are 2046g with rim tape
Reference: http://forums.roadbikereview.com/specia ... 61310.html
Bracciano is sub 1500g with rim tape.
The Tiagra cassette which I believe came on your bike is 310g if its a 12-28
An Ultegra cassette is 208g for an 11-23
Total weight saving should be approx 648g, more if you use lighter tyres then you have currently.
Pretty good for the budget

-
- Posts: 9576
- Joined: Thu Feb 24, 2011 3:40 pm
- Location: Brisbane
Re: New Wheels....
Postby jasonc » Wed Feb 06, 2013 9:39 am
jacks1071 wrote:An Ultegra cassette is 208g for an 11-23
11-23 cassette - no so good for that hilly stuff

- jacks1071
- Posts: 3064
- Joined: Thu Aug 20, 2009 9:47 pm
- Location: Mackay, QLD
- Contact:
Re: New Wheels....
Postby jacks1071 » Wed Feb 06, 2013 1:52 pm
jasonc wrote:jacks1071 wrote:An Ultegra cassette is 208g for an 11-23
11-23 cassette - no so good for that hilly stuff
Its all relative depending on your weight, power output and how steep the hills are.
I couldn't find a weight on a different ratio online so used the 11-23 for my example

Return to “Buying a bike / parts”
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Cycling Brands
- Azzurri
- Bianchi
- BMC
- Campagnolo
- Cannondale
- Cervélo
- Colnago
- Focus
- Fuji
- Garmin
- Giant
- Malvern Star
- Merida
- Scott
- Shimano
- Specialized
- SRAM
- Surly
- Trek
- Custom Builders
- Generic Carbon
- All times are UTC+10:00
- Top
- Delete all board cookies
About the Australian Cycling Forums
The largest cycling discussion forum in Australia for all things bike; from new riders to seasoned bike nuts, the Australian Cycling Forums are a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.