Not sure if this has come up before but I know I've read previously here about concerns with final drive ratio.
For those amongst us (like me who only spotted it this evening) Rohloff has revised the permitted transmission factor to 2.1 down from 2.38 with the caveat that its targeted only for solo cyclists under 100kg.
The spiel:
News
SPEEDHUB 500/14 revised permitted transmission factor now 2.1!
11.12.2012
The permitted sprocket ratios for the SPEEDHUB 500/14 were set to ensure the hub would not be damaged due to a high input torque. These limits were set identical to the lower limits of derailleur systems of the day (2.35) but these obviously also contained a small buffer.
Current derailleur systems offer lower gear ratios now which are particularly favored by 29er cyclists for hard off-road climbs. Due to the increased interest in these bicycles the Rohloff AG has reviewed our permitted ratios and reduced the transmission factor further to just 2.1 for solo cyclists under 100kg. The 'buffer' that the SPEEDHUB previously had available is not longer present and this new factor must not be reduced further.
SPEEDHUB equipped bicycles may now achieve 1.36m per crank revolution in their lowest gear without risk of losing warranty cover.
Calculating the Transmission factor:
36 tooth front chainring with a 17 tooth rear sprocket = 36:17= factor 2.11 (updated Table can be found in the Owners Manual, page 20).
The Transmission factor of 2.5 still applies for Tandem use and cyclists weighing over 100kg!
http://www.rohloff.de/en/news/news_rss/ ... index.html" onclick="window.open(this.href);return false;
There, my work is done - dont say I didnt give you anything for xmas
Rohloff permitted sprocket ratios revised
- rifraf
- Posts: 3851
- Joined: Fri Apr 15, 2011 5:55 pm
- Location: Two Rocks, WA
Rohloff permitted sprocket ratios revised
Postby rifraf » Mon Dec 24, 2012 2:24 am
Surly Ogre, Extrawheel trailer.
- RonK
- Posts: 11508
- Joined: Mon Aug 24, 2009 2:08 pm
- Location: If you need to know, ask me
- Contact:
Re: Rohloff permitted sprocket ratios revised
Postby RonK » Mon Dec 24, 2012 4:15 pm
Hehe, so when Rohloff realised that their warranty exclusion was in fact excluding Rohloff sales to the growth market segment, they just changed their own rule. Now that's what I call self-serving.
And isn't the weight limit a joke - what are they going to do, weigh riders who make a warranty claim?
For that matter, who is going to present their bike for a warranty claim with an oversized sprocket?
And isn't the weight limit a joke - what are they going to do, weigh riders who make a warranty claim?
For that matter, who is going to present their bike for a warranty claim with an oversized sprocket?
Cycle touring blog and tour journals: whispering wheels...
- rifraf
- Posts: 3851
- Joined: Fri Apr 15, 2011 5:55 pm
- Location: Two Rocks, WA
Re: Rohloff permitted sprocket ratios revised
Postby rifraf » Mon Dec 24, 2012 4:23 pm
Certainly with a 29er build with loaded touring focus the Rohloff purchase was bringing up questions of satisfactory gearing. At least it was for me. I started looking once again at 26" wheel bike options. This will help throw a "little" oil on troubled waters. Of course the warranty wont cover touring loads me thinks as they only mention rider weights.RonK wrote:Hehe, so when Rohloff realised that their warranty exclusion was in fact excluding Rohloff sales to the growth market segment, they just changed their own rule. Now that's what I call self-serving.
Warranty returns will be sprocketless and with a cheesy grin!
Surly Ogre, Extrawheel trailer.
- RonK
- Posts: 11508
- Joined: Mon Aug 24, 2009 2:08 pm
- Location: If you need to know, ask me
- Contact:
Re: Rohloff permitted sprocket ratios revised
Postby RonK » Mon Dec 24, 2012 4:39 pm
It's not the amount of load on the bike, but that the heavier rider generates more torque.rifraf wrote:Of course the warranty wont cover touring loads me thinks as they only mention rider weights.
Cycle touring blog and tour journals: whispering wheels...
- rifraf
- Posts: 3851
- Joined: Fri Apr 15, 2011 5:55 pm
- Location: Two Rocks, WA
Re: Rohloff permitted sprocket ratios revised
Postby rifraf » Mon Dec 24, 2012 4:56 pm
I find women, who hopefully tend on average to be lighter, generate loads more talkRonK wrote:It's not the amount of load on the bike, but that the heavier rider generates more torque.rifraf wrote:Of course the warranty wont cover touring loads me thinks as they only mention rider weights.
Best we dont mention their luggage requirements
Surly Ogre, Extrawheel trailer.
- exadios
- Posts: 515
- Joined: Fri Dec 21, 2007 2:07 am
- Location: Melville, WA
- Contact:
Re: Rohloff permitted sprocket ratios revised
Postby exadios » Mon Dec 24, 2012 11:25 pm
My minimum ratio is currently 24/13 = 1.85. I've had no problems with this set up but then I'm not a candidate for the Tour de France either (maybe later when the performance enhancing drugs kick in ). I use 152 mm cranks so a more representative ratio would be (24*170)/(13*152) = 2.06.
- rifraf
- Posts: 3851
- Joined: Fri Apr 15, 2011 5:55 pm
- Location: Two Rocks, WA
Re: Rohloff permitted sprocket ratios revised
Postby rifraf » Thu Feb 07, 2013 2:11 pm
Wow, I've not seen 152mm cranks. Sound like they'd be good for spinning. Seems much easier to find longer cranks.exadios wrote:My minimum ratio is currently 24/13 = 1.85. I've had no problems with this set up but then I'm not a candidate for the Tour de France either (maybe later when the performance enhancing drugs kick in ). I use 152 mm cranks so a more representative ratio would be (24*170)/(13*152) = 2.06.
I was probably not looking in the right places but after wishing for something in and around the 165mm range, I got sick of looking and grabbed the next set of
square tapered 170's that came along.
Surly Ogre, Extrawheel trailer.
- exadios
- Posts: 515
- Joined: Fri Dec 21, 2007 2:07 am
- Location: Melville, WA
- Contact:
Re: Rohloff permitted sprocket ratios revised
Postby exadios » Thu Feb 07, 2013 10:12 pm
Most recumbent riders use short cranks - some shorter than mine. I got mine from Greenspeed. If you want short cranks you need to look on line. You will not find them at your LBS.rifraf wrote:Wow, I've not seen 152mm cranks. Sound like they'd be good for spinning. Seems much easier to find longer cranks.exadios wrote:My minimum ratio is currently 24/13 = 1.85. I've had no problems with this set up but then I'm not a candidate for the Tour de France either (maybe later when the performance enhancing drugs kick in ). I use 152 mm cranks so a more representative ratio would be (24*170)/(13*152) = 2.06.
I was probably not looking in the right places but after wishing for something in and around the 165mm range, I got sick of looking and grabbed the next set of
square tapered 170's that came along.
- rifraf
- Posts: 3851
- Joined: Fri Apr 15, 2011 5:55 pm
- Location: Two Rocks, WA
Re: Rohloff permitted sprocket ratios revised
Postby rifraf » Fri Feb 08, 2013 12:16 am
Thanks for the heads upexadios wrote:
Most recumbent riders use short cranks - some shorter than mine. I got mine from Greenspeed. If you want short cranks you need to look on line. You will not find them at your LBS.
Surly Ogre, Extrawheel trailer.
Return to “Touring Bikes and Equipment”
Jump to
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Time Trial
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
- Country & Regional
Who is online
Users browsing this forum: No registered users
- All times are UTC+10:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
Brought to you by Bicycles Network Australia | © 1999 - 2024 | Powered by phpBB ®
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.